Generated by kicad-footprint-generator · KiCad file format 20260206
INA241B5IDDFR
Texas Instruments · Current Sense Amplifiers · TSOT-23-8
INA241B5IDDFR from Texas Instruments, in a TSOT-23-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | IN- | input | Current-sense amplifier negative input; for high-side applications connect to load side of sense resistor, for low-side applications connect to ground side of sense resistor. |
| 2 | GND | power_in | Ground. |
| 3 | REF2 | input | Reference 2 voltage input; connect to a voltage potential from 0 V to VS. |
| 4 | NC | unconnected | Reserved; connect to ground. |
| 5 | OUT | output | Output voltage. |
| 6 | VS | power_in | Power supply, 2.7 V to 20 V. |
| 7 | REF1 | input | Reference 1 voltage input; connect to a voltage potential from 0 V to VS. |
| 8 | IN+ | input | Current-sense amplifier positive input; for high-side applications connect to bus-voltage side of sense resistor, for low-side applications connect to load side of sense resistor. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | TSOT-23-8 |
| Category | Amplifiers/Comparators |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Common-mode input range | VCM | -5 | 110 | V | VIN+, VIN- = -5 V to 110 V, VSENSE = 0 mV, TA = -40°C to 125°C | 6 | |
| Common-mode rejection ratio, input-referred (INA241B) | CMRR | 120 | 130 | dB | VIN+, VIN- = -5 V to 110 V, VSENSE = 0 mV, TA = -40°C to 125°C, INA241B | 6 | |
| Offset voltage, input-referred (INA241B) | Vos | -150 | 25 | 150 | µV | VSENSE = 0 mV, INA241B | 6 |
| Offset voltage drift, input-referred (INA241B) | dVos/dT | -500 | 100 | 500 | nV/°C | TA = -40°C to 125°C, INA241B | 6 |
| Power-supply rejection ratio, input-referred (INA241B) | PSRR | -10 | 1 | 10 | µV/V | VS = 2.7 V to 20 V, VSENSE = 0 mV, VREF1 = VREF2 = 1V, TA = -40°C to 125°C, INA241B | 6 |
| Input bias current | IB | 25 | 35 | 45 | uA | IB+, IB-, VSENSE=0 mV | 6 |
| Reference input range | 0 | V | 0 to VS | 6 | |||
| Gain (B5) | G | 200 | V/V | A5, B5 Devices | 6 | ||
| Gain error (INA241B) | GERR | -0.1 | 0.02 | 0.1 | % | (GND + 50 mV) < VOUT < (VS - 200 mV), INA241B | 7 |
| Gain error drift (INA241B) | -5 | 0.2 | 5 | ppm/°C | TA = -40°C to +125°C, INA241B | 7 | |
| Non-linearity error | 0.001 | % | 7 | ||||
| Maximum capacitive load | 1 | nF | No sustained oscillations, No isolation resistor | 7 | |||
| Swing to ground | 8 | 20 | mV | RL = 10 kΩ to GND, VSENSE = 0 mV, VREF1 = VREF2 = 0 V, TA = -40°C to +125°C | 7 | ||
| Reference voltage rejection ratio, input-referred (INA241B) | RVRR | -20 | 10 | 20 | µV/V | VREF1 = VREF2 = 0.5 V to 4.5 V, TA = -40°C to +125°C, INA241B | 7 |
| Reference divider accuracy (INA241B) | -0.15 | 0.02 | 0.15 | % | VOUT = /(VREF1 + VREF2)/ / 2 at VSENSE =0 mV, TA = -40°C to +125°C, INA241B | 7 | |
| Bandwidth | BW | 1.1 | MHz | All Gains, −3dB Bandwidth | 7 | ||
| Settling time to 0.5% | 1.5 | µs | VIN+, VIN- = 48 V, VOUT = 0.5 V to 4.5 V, Output settles to 0.5% | 7 | |||
| Settling time to 1% | 1 | µs | VIN+, VIN- = 48 V, VOUT = 0.5 V to 4.5 V, Output settles to 1% | 7 | |||
| Settling time to 5% | 0.5 | µs | VIN+, VIN- = 48 V, VOUT = 0.5 V to 4.5 V, Output settles to 5% | 7 | |||
| Slew rate | SR | 8 | V/µs | Rising | 7 | ||
| Voltage noise density | 28 | nV/√Hz | A5, B5 Devices | 8 | |||
| Supply voltage | VS | 2.7 | 20 | V | 8 | ||
| Quiescent current | IQ | 2.5 | 3 | mA | VSENSE = 0 mV | 8 | |
| Quiescent current over temperature | IQ | 3.2 | mA | VSENSE = 0 mV, TA = -40°C to+125°C | 8 | ||
| Specified temperature range | TA | -40 | 125 | °C | 8 | ||
| Supply voltage | VS | 22 | V | 5 | |||
| Differential analog input (VIN+) − (VIN-) | -30 | 30 | V | 5 | |||
| Common-mode analog input | -20 | 120 | V | 5 | |||
| Operating temperature | TA | -55 | 150 | °C | 5 | ||
| Junction temperature | TJ | 150 | °C | 5 | |||
| Storage temperature | Tstg | -65 | 150 | °C | 5 | ||
| ESD HBM | V(ESD) | -2000 | 2000 | V | Human body model, all pins | 5 | |
| ESD CDM | V(ESD) | -1000 | 1000 | V | Charged device model, all pins | 5 | |
| Common-mode input range | VCM | -5 | 48 | 110 | V | 5 | |
| Operating supply range | VS | 2.7 | 5 | 20 | V | 5 | |
| Ambient temperature | TA | -40 | 125 | °C | 5 | ||
| Junction-to-ambient thermal resistance | RθJA | 129.7 | °C/W | DDF (SOT23) 8 pins | 5 | ||
| Junction-to-case (top) thermal resistance | RθJC(top) | 58 | °C/W | DDF (SOT23) 8 pins | 5 | ||
| Junction-to-board thermal resistance | RθJB | 52.6 | °C/W | DDF (SOT23) 8 pins | 5 | ||
| Junction-to-top characterization parameter | ΨJT | 2.3 | °C/W | DDF (SOT23) 8 pins | 5 | ||
| Junction-to-board characterization parameter | ΨJB | 52.3 | °C/W | DDF (SOT23) 8 pins | 5 |
CAD (KiCad official)
- Symbol:
INA241B5IDDFR - Footprint:
Package_TO_SOT_SMD:TSOT-23-8 - 3D model: TSOT-23-8 (KiCad packages3D, STEP)
- 3D model files:
ina241b5iddfr-etched.step/ina241b5iddfr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);ina241b5iddfr.step/ina241b5iddfr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (43 pp, sha256
12a6925f886fa1a0, retrieved 2026-10-31, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).