main
Ray Publish 0.1.0 095be00

INA241B2QDDFRQ1

Texas Instruments · Current Sense Amplifiers · SOT-23-8

INA241B2QDDFRQ1 from Texas Instruments, in a SOT-23-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol and footprint from KiCad-official CAD; the 3D model is generated from the datasheet's package dimensions.

Pinout

Pin Name Type Function
1 IN- input Current-sense amplifier negative input; connect to the load side of the sense resistor for high-side applications, or to the ground side for low-side applications.
2 GND power_in Ground reference for the device.
3 REF2 input Reference 2 voltage; connect to a voltage potential from 0V to VS (see Adjusting the Output With the Reference Pins).
4 NC unconnected Reserved; connect to ground.
5 OUT output Output voltage.
6 VS power_in Power supply, 2.7V to 20V.
7 REF1 input Reference 1 voltage; connect to a voltage potential from 0V to VS (see Adjusting the Output With the Reference Pins).
8 IN+ input Current-sense amplifier positive input; connect to the bus-voltage side of the sense resistor for high-side applications, or to the load side for low-side applications.

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package SOT-23-8
Category Amplifiers/Comparators
Pins 8

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Common-mode input range VCM -5 110 V VIN+, VIN- = -5V to 110V, VSENSE = 0mV, TA = -40°C to 125°C 5
Common-mode rejection ratio, input-referred CMRR 120 130 dB VIN+, VIN- = -5V to 110V, VSENSE = 0mV, TA = -40°C to 125°C, INA241B-Q1 5
Offset voltage, input-referred Vos -150 25 150 µV VSENSE = 0mV, INA241B-Q1 5
Offset voltage drift, input-referred dVos/dT -500 100 500 nV/°C TA = -40°C to 125°C, INA241B-Q1 5
Power-supply rejection ratio, input-referred PSRR -10 1 10 µV/V VS = 2.7V to 20V, VSENSE = 0mV, VREF1 = VREF2 = 1V, TA = -40°C to 125°C, INA241B-Q1 5
Input bias current IB 25 35 45 µA IB+, IB-, VSENSE=0mV 5
Gain error GERR -0.1 0.02 0.1 % (GND + 50mV) < VOUT < (VS - 200mV), INA241B-Q1 6
Gain error drift -5 0.2 5 ppm/°C TA = -40°C to +125°C, INA241B-Q1 6
Swing to GND 8 20 mV RL = 10kΩ to GND, VSENSE = 0mV, VREF1 = VREF2 = 0V, TA = -40°C to +125°C 6
Reference voltage rejection ratio, input-referred RVRR -20 10 20 µV/V VREF1 = VREF2 = 0.5V to 4.5V, TA = -40°C to +125°C, INA241B-Q1 6
Reference divider accuracy -0.15 0.02 0.15 % VOUT = /(VREF1 + VREF2)/ / 2 at VSENSE = 0mV, VREF1 = VS/VREF2 = GND or VREF1 = GND/VREF2 = VS, TA = -40°C to +125°C, INA241B-Q1 7
Reference input range 0 V 5
Maximum capacitive load 1 nF No sustained oscillations, No isolation resistor 6
Gain G 20 V/V A2, B2 Devices 6
Non-linearity error 0.001 % 6
Bandwidth BW 1.1 MHz All Gains, −3dB Bandwidth 7
Settling time 1.5 µs VIN+, VIN- = 48V, VOUT = 0.5V to 4.5V, Output settles to 0.5% 7
Settling time 1 µs VIN+, VIN- = 48V, VOUT = 0.5V to 4.5V, Output settles to 1% 7
Settling time 0.5 µs VIN+, VIN- = 48V, VOUT = 0.5V to 4.5V, Output settles to 5% 7
Slew rate, rising SR 8 V/µs Rising 7
Voltage noise density 49 nV/√Hz A2, B2 Devices 7
Supply voltage VS 2.7 20 V 7
Quiescent current IQ 2.5 3 mA VSENSE = 0mV 7
Quiescent current IQ 3.2 mA VSENSE = 0mV, TA = -40°C to +125°C 7
Specified ambient temperature range TA -40 125 °C 7
Common-mode input range (recommended) VCM -5 48 110 V 4
Operating supply range VS 2.7 5 20 V 4
Ambient temperature TA -40 125 °C 4
Supply voltage VS 22 V 4
Analog input differential (VIN+) − (VIN-) -30 30 V 4
Analog input common-mode VIN+, VIN- -20 120 V 4
Operating temperature TA -55 150 °C 4
Junction temperature TJ 150 °C 4
Storage temperature Tstg -65 150 °C 4
Junction-to-ambient thermal resistance RθJA 129.7 °C/W DDF (SOT23) 8-pin package 4
Junction-to-case (top) thermal resistance RθJC(top) 58 °C/W DDF (SOT23) 8-pin package 4
Junction-to-board thermal resistance RθJB 52.6 °C/W DDF (SOT23) 8-pin package 4
Junction-to-top characterization parameter ΨJT 2.3 °C/W DDF (SOT23) 8-pin package 4
Junction-to-board characterization parameter ΨJB 52.3 °C/W DDF (SOT23) 8-pin package 5

CAD (land: KiCad; 3D: generated from the datasheet)

  • Symbol: INA241B2QDDFRQ1
  • Footprint: Package_TO_SOT_SMD:SOT-23-8
  • 3D model: SOT-23-8, generated on the KiCad land (body 1.6 x 2.9 mm, terminals on the pads, 1.1 mm tall, datasheet A, max). KiCad's stock model for this land is taller than the datasheet allows, so the model is generated from the datasheet drawing; the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
  • 3D model files: ina241b2qddfrq1-etched.step / ina241b2qddfrq1-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); ina241b2qddfrq1.step / ina241b2qddfrq1.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (49 pp, sha256 2f6d0238042e770d, retrieved 2026-11-13, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: land: KiCad official libraries (CC-BY-SA 4.0); 3D: generated from the datasheet's package dimensions (provenance.model_3d_generated).

Datasheet PDF