3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownINA240A1D
Texas Instruments · Current Sense Amplifiers · SOIC-8
INA240A1D from Texas Instruments, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | IN- | input | Analog input connected to the negative (load) side of the shunt resistor; supports voltage range -4V to 80V common-mode. |
| 2 | GND | power_in | Analog ground reference. |
| 3 | REF2 | input | Analog input for reference 2 voltage; connect to 0V to VS to set output midpoint for single-ended or differential configurations. |
| 4 | NC | unconnected | Not connected to internal circuit; reserved - ground or leave floating. |
| 5 | OUT | output | Analog output voltage; range determined by reference configuration and load conditions. |
| 6 | VS | power_in | Power supply voltage; operating range 2.7V to 5.5V. |
| 7 | REF1 | input | Analog input for reference 1 voltage; connect to 0V to VS to set output midpoint for single-ended or differential configurations. |
| 8 | IN+ | input | Analog input connected to the positive (supply) side of the shunt resistor; supports voltage range -4V to 80V common-mode. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | SOIC-8 |
| Category | Amplifiers/Comparators |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Common-mode input voltage range | VCM | -4 | 80 | V | VIN+ = –4V 至 80V,VSENSE = 0mV;TA = –40°C 至 125°C | 5 | |
| Common-mode rejection ratio | CMRR | 120 | 132 | dB | VIN+ = –4V 至 80V,VSENSE = 0mV;TA = –40°C 至 125°C | 5 | |
| Input offset voltage (referred to input) | VOS | -25 | 5 | 25 | µV | VSENSE = 0mV | 5 |
| Offset voltage drift | dVOS/dT | -250 | 50 | 250 | nV/°C | VSENSE = 0V,TA = –40°C 至 125°C | 5 |
| Power-supply rejection ratio | PSRR | -10 | 1 | 10 | µV/V | VS = 2.7V 至 5.5V,VSENSE = 0mV;TA = –40°C 至 125°C | 5 |
| Gain error | -0.2 | 0.05 | 0.2 | % | GND + 50mV ≤ VOUT ≤ VS – 200mV | 5 | |
| Gain error drift | -2.5 | 0.5 | 2.5 | ppm/°C | TA = –40°C 至 125°C | 5 | |
| Reference divider accuracy | 0.02 | 0.1 | % | VOUT = /(VREF1 – VREF2)//2,VSENSE = 0mV,TA = –40°C 至 125°C | 5 | ||
| Maximum capacitive load | 1 | nF | 无持续振荡 | 5 | |||
| Operating supply voltage range | VS | 2.7 | 5.5 | V | TA = –40°C 至 125°C | 5 | |
| Quiescent current | IQ | 1.8 | 2.4 | mA | VSENSE = 0mV | 5 | |
| Reference input range | 0 | V | 5 | ||||
| Common-mode input voltage (recommended) | VCM | -4 | 80 | V | 4 | ||
| Supply voltage (recommended) | VS | 2.7 | 5.5 | V | 4 | ||
| Ambient operating temperature (recommended) | TA | -40 | 125 | °C | 4 | ||
| Supply voltage (absolute maximum) | 6 | V | 4 | ||||
| Differential input voltage (absolute maximum) | VIN+, VIN– | -80 | 80 | V | 4 | ||
| Common-mode input voltage (absolute maximum) | -6 | 90 | V | 4 | |||
| Ambient operating temperature range (absolute maximum) | TA | -55 | 150 | °C | 4 | ||
| Junction temperature (absolute maximum) | TJ | 150 | °C | 4 | |||
| Storage temperature (absolute maximum) | Tstg | -65 | 150 | °C | 4 | ||
| Junction-to-ambient thermal resistance | RθJA | 113.5 | °C/W | D (SOIC) 8-pin package | 4 | ||
| Junction-to-case (top) thermal resistance | RθJC(top) | 51.9 | °C/W | D (SOIC) 8-pin package | 4 | ||
| Junction-to-board thermal resistance | RθJB | 57.8 | °C/W | D (SOIC) 8-pin package | 4 | ||
| Junction-to-top characterization parameter | ψJT | 10.2 | °C/W | D (SOIC) 8-pin package | 4 | ||
| Junction-to-board characterization parameter | ψJB | 56.9 | °C/W | D (SOIC) 8-pin package | 4 |
CAD (KiCad official)
- Symbol:
INA240A1D - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SOIC-8 (KiCad packages3D, STEP)
- 3D model files:
ina240a1d-etched.step/ina240a1d-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);ina240a1d.step/ina240a1d.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (38 pp, sha256
b75bb6d308520432, retrieved 2026-09-24, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.2, primaryclaude-haiku-4-5-20251001(text), consensusclaude-sonnet-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).