main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs ina236biddfr: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
viewers ina236biddfr: viewers · Ray
ina236biddfr-etched.fit.json ina236biddfr: one-pass backfill (re-etched, hero rebuilt in-pass (inputs changed)) · Ray
ina236biddfr-etched.glb ina236biddfr: one-pass backfill (re-etched, hero rebuilt in-pass (inputs changed)) · Ray
ina236biddfr-etched.step ina236biddfr: one-pass backfill (re-etched, hero rebuilt in-pass (inputs changed)) · Ray
ina236biddfr-hero.glb ina236biddfr: hero from the plain model · Ray
ina236biddfr-hero.overlay.json ina236biddfr: hero from the plain model · Ray
ina236biddfr.glb Publish 0.1.0 · Ray
ina236biddfr.kicad_mod Publish 0.1.0 · Ray
ina236biddfr.kicad_sym Publish 0.1.0 · Ray
ina236biddfr.lbr Publish 0.1.0 · Ray
ina236biddfr.step Publish 0.1.0 · Ray
package.json Publish 0.1.1 · Ray
page.json Publish 0.1.1 · Ray
README.md Initial commit: component/ina236biddfr · Ray

INA236BIDDFR

Texas Instruments · Supervisor And Reset ICs · TSOT-23-8

INA236BIDDFR from Texas Instruments, in a TSOT-23-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 IN+ input Current sensing positive input; for high-side application connect to bus voltage side of sensing resistor; for low-side application connect to load side; operates within -0.3 V to 48 V common-mode range.
2 IN- input Current sensing negative input; for high-side application connect to load side of sensing resistor; for low-side application connect to ground side; bus voltage measured relative to this pin; operates within -0.3 V to 48 V common-mode range.
3 GND power_in Analog and digital ground reference.
4 VS power_in Power supply input; operating voltage range 1.7 V to 5.5 V.
5 SCL input I2C/SMBus serial clock input; open-drain configuration; I2C bus voltage 1.2 V to 5.5 V with external pull-up resistor required.
6 SDA bidirectional I2C/SMBus serial data line; open-drain input/output; I2C bus voltage 1.2 V to 5.5 V with external pull-up resistor required.
7 A0 input Address selection input; connect to GND, VS, SCL, or SDA to select one of four device I2C addresses.
8 ALERT output Multifunctional alert output; open-drain configuration; reports fault conditions (shunt over/under voltage, bus over/under voltage, power threshold) and conversion ready status based on software configuration.

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package TSOT-23-8
Category Power Management (PMIC)
Pins 8

CAD (KiCad official)

  • Symbol: INA236BIDDFR
  • Footprint: Package_TO_SOT_SMD:TSOT-23-8
  • 3D model: TSOT-23-8 (KiCad packages3D, STEP)
  • 3D model files: ina236biddfr-etched.step / ina236biddfr-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); ina236biddfr.step / ina236biddfr.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (43 pp, sha256 d46041d1f15b9350, retrieved 2026-10-01, tier: lcsc)
  • Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-4-5-20251001 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF