component
INA236BIDDFR
Public Made by Adomby adom
Texas Instruments Supervisor And Reset ICs, TSOT-23-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
← Commit history
README.mdadded+45@@ -0,0 +1,45 @@+# INA236BIDDFR++**Texas Instruments** · Supervisor And Reset ICs · TSOT-23-8++INA236BIDDFR from Texas Instruments, in a TSOT-23-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | IN+ | input | Current sensing positive input; for high-side application connect to bus voltage side of sensing resistor; for low-side application connect to load side; operates within -0.3 V to 48 V common-mode range. |+| 2 | IN- | input | Current sensing negative input; for high-side application connect to load side of sensing resistor; for low-side application connect to ground side; bus voltage measured relative to this pin; operates within -0.3 V to 48 V common-mode range. |+| 3 | GND | power_in | Analog and digital ground reference. |+| 4 | VS | power_in | Power supply input; operating voltage range 1.7 V to 5.5 V. |+| 5 | SCL | input | I2C/SMBus serial clock input; open-drain configuration; I2C bus voltage 1.2 V to 5.5 V with external pull-up resistor required. |+| 6 | SDA | bidirectional | I2C/SMBus serial data line; open-drain input/output; I2C bus voltage 1.2 V to 5.5 V with external pull-up resistor required. |+| 7 | A0 | input | Address selection input; connect to GND, VS, SCL, or SDA to select one of four device I2C addresses. |+| 8 | ALERT | output | Multifunctional alert output; open-drain configuration; reports fault conditions (shunt over/under voltage, bus over/under voltage, power threshold) and conversion ready status based on software configuration. |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | Texas Instruments |+| Package | TSOT-23-8 |+| Category | Power Management (PMIC) |+| Pins | 8 |++## CAD (KiCad official)++- Symbol: `INA236BIDDFR`+- Footprint: `Package_TO_SOT_SMD:TSOT-23-8`+- 3D model: TSOT-23-8 (KiCad packages3D, STEP)+- 3D model files: `ina236biddfr-etched.step` / `ina236biddfr-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `ina236biddfr.step` / `ina236biddfr.glb` are the bare package body.++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/cn/lit/gpn/ina236) (43 pp, sha256 `d46041d1f15b9350`, retrieved 2026-10-01, tier: lcsc)+- **Datasheet language:** Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.+- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-4-5-20251001` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/ina236biddfr-datasheet.pdf)
page.jsonadded+155@@ -0,0 +1,155 @@+{+ "slug": "ina236biddfr",+ "version": "0.1.0",+ "type": "component",+ "description": "Texas Instruments Supervisor And Reset ICs, TSOT-23-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",+ "tags": [+ "component",+ "power management (pmic)",+ "ina236biddfr",+ "factory-2.0.0",+ "extractor-text"+ ],+ "dependencies": {},+ "hero": {+ "type": "image",+ "path": "docs/hero.png"+ },+ "files": [+ "page.json",+ "README.md",+ "ina236biddfr.kicad_sym",+ "ina236biddfr.kicad_mod",+ "ina236biddfr.glb",+ "ina236biddfr.step",+ "ina236biddfr.lbr",+ "docs/hero.png",+ "docs/ina236biddfr-datasheet.pdf",+ "viewers/symbol.html",+ "viewers/footprint.html"+ ],+ "component": {+ "mpn": "INA236BIDDFR",+ "manufacturer": "Texas Instruments",+ "package": "TSOT-23-8",+ "pin_count": 8,+ "category": "Power Management (PMIC)",+ "subcategory": "Supervisor And Reset ICs",+ "datasheet": "https://www.ti.com/cn/lit/gpn/ina236",+ "parts": {+ "symbol": "ina236biddfr.kicad_sym",+ "footprint": "ina236biddfr.kicad_mod",+ "model_3d": "ina236biddfr-etched.glb",+ "model_3d_plain": "ina236biddfr.glb",+ "model_3d_step": "ina236biddfr-etched.step",+ "model_3d_step_plain": "ina236biddfr.step",+ "lbr": "ina236biddfr.lbr"+ },+ "distributor_links": {+ "lcsc": "C22415777",+ "digikey": "296-INA236BIDDFRTR-ND",+ "mouser": "595-INA236BIDDFR"+ },+ "distributor_check": {+ "checked_at": "2026-10-01T15:57:26Z",+ "source": "Component Ocean /api/assign-pns",+ "digikey": {+ "pn": "296-INA236BIDDFRTR-ND",+ "status": "found"+ },+ "mouser": {+ "pn": "595-INA236BIDDFR",+ "status": "found"+ }+ },+ "pins": [+ {+ "number": "1",+ "name": "IN+",+ "type": "input",+ "description": "Current sensing positive input; for high-side application connect to bus voltage side of sensing resistor; for low-side application connect to load side; operates within -0.3 V to 48 V common-mode range."+ },+ {+ "number": "2",+ "name": "IN-",+ "type": "input",+ "description": "Current sensing negative input; for high-side application connect to load side of sensing resistor; for low-side application connect to ground side; bus voltage measured relative to this pin; operates within -0.3 V to 48 V common-mode range."+ },+ {+ "number": "3",+ "name": "GND",+ "type": "power_in",+ "description": "Analog and digital ground reference."+ },+ {+ "number": "4",+ "name": "VS",+ "type": "power_in",+ "description": "Power supply input; operating voltage range 1.7 V to 5.5 V."+ },+ {+ "number": "5",+ "name": "SCL",+ "type": "input",+ "description": "I2C/SMBus serial clock input; open-drain configuration; I2C bus voltage 1.2 V to 5.5 V with external pull-up resistor required."+ },+ {+ "number": "6",+ "name": "SDA",+ "type": "bidirectional",+ "description": "I2C/SMBus serial data line; open-drain input/output; I2C bus voltage 1.2 V to 5.5 V with external pull-up resistor required."+ },+ {+ "number": "7",+ "name": "A0",+ "type": "input",+ "description": "Address selection input; connect to GND, VS, SCL, or SDA to select one of four device I2C addresses."+ },+ {+ "number": "8",+ "name": "ALERT",+ "type": "output",+ "description": "Multifunctional alert output; open-drain configuration; reports fault conditions (shunt over/under voltage, bus over/under voltage, power threshold) and conversion ready status based on software configuration."+ }+ ],+ "provenance": {+ "extractor": "extract_pins 0.3",+ "factory_chain": {+ "factory": "2.0.0",+ "extractor": "extract_pins 0.3",+ "primary_model": "claude-haiku-4-5-20251001",+ "primary_mode": "text",+ "consensus_model": "claude-sonnet-5-5",+ "consensus": "agreed",+ "guards": "pin_guards 0.1: passed",+ "guard_notes": [],+ "pages_sent": 28,+ "cost_usd": 0.2358,+ "at": "2026-10-01T15:57:11"+ },+ "datasheet": {+ "url": "https://www.ti.com/cn/lit/gpn/ina236",+ "pages": 43,+ "sha256": "d46041d1f15b9350",+ "source_tier": "lcsc"+ },+ "cad": "KiCad official (CC-BY-SA 4.0)",+ "pins": {+ "total": 8,+ "described": 8,+ "cites_pages": true,+ "refuses_to_fabricate": true+ }+ },+ "viewers": {+ "symbol": "viewers/symbol.html",+ "footprint": "viewers/footprint.html"+ }+ },+ "visibility": "public",+ "org": "adom",+ "author": {+ "name": "Ray",+ "email": "[email protected]"+ }+}