main
Ray ina2332aipwr: component.models_3d pose record per STEP (Z-up, seated z=0, pad-centre origin, identity binding) df10242
{
  "schema_version": 1,
  "type": "component",
  "slug": "ina2332aipwr",
  "title": "INA2332AIPWR",
  "brief": "Texas Instruments Instrumentation OpAmps, TSSOP-14. Pinout extracted from the datasheet, KiCad symbol/footprint/3D.",
  "version": "0.1.0",
  "license": "CC-BY-SA-4.0",
  "tags": [
    "component",
    "op-amp-cmp",
    "ina2332aipwr"
  ],
  "component": {
    "mpn": "INA2332AIPWR",
    "manufacturer": "Texas Instruments",
    "package": "TSSOP-14",
    "pin_count": 14,
    "category": "Op-amp/Cmp",
    "subcategory": "Instrumentation OpAmps",
    "datasheet": "https://wmsc.lcsc.com/wmsc/upload/file/pdf/v2/lcsc/2302221730_Texas-Instruments-INA2332AIPWR_C962973.pdf",
    "parts": {
      "symbol": "ina2332aipwr.kicad_sym",
      "footprint": "ina2332aipwr.kicad_mod",
      "model_3d": "ina2332aipwr-etched.glb",
      "model_3d_plain": "ina2332aipwr.glb",
      "model_3d_step": "ina2332aipwr-etched.step",
      "model_3d_step_plain": "ina2332aipwr.step",
      "lbr": "ina2332aipwr.lbr"
    },
    "distributor_links": {},
    "pins": [
      {
        "number": "1",
        "name": "RGA",
        "type": "passive",
        "description": "Channel A external gain-set resistor node. Connect resistors R1 (to internal 10 kΩ tap) and R2 (to output) to set gain per G = 5 + 5(R2/R1); leave open for the internal G = 5 configuration."
      },
      {
        "number": "2",
        "name": "VIN-A",
        "type": "input",
        "description": "Channel A inverting differential signal input. Diode-clamped to the supply rails; external signals must be current-limited to ≤10 mA if driven >0.5 V beyond the rails."
      },
      {
        "number": "3",
        "name": "VIN+A",
        "type": "input",
        "description": "Channel A non-inverting differential signal input. High-impedance CMOS input (10^13 Ω || 3 pF), 0.5 pA typical bias current."
      },
      {
        "number": "4",
        "name": "V-",
        "type": "power_in",
        "description": "Negative supply / ground for both channels. Tie to GND for single-supply operation or to the negative rail for bipolar supplies. Total V+ to V- must not exceed 7.5 V (absolute maximum)."
      },
      {
        "number": "5",
        "name": "VIN+B",
        "type": "input",
        "description": "Channel B non-inverting differential signal input. High-impedance CMOS input, 0.5 pA typical bias current."
      },
      {
        "number": "6",
        "name": "VIN-B",
        "type": "input",
        "description": "Channel B inverting differential signal input. Diode-clamped to the supply rails; external signals must be current-limited to ≤10 mA if driven >0.5 V beyond the rails."
      },
      {
        "number": "7",
        "name": "RGB",
        "type": "passive",
        "description": "Channel B external gain-set resistor node. Connect resistors R1/R2 to set gain per G = 5 + 5(R2/R1); leave open for the internal G = 5 configuration."
      },
      {
        "number": "8",
        "name": "ShutdownB",
        "type": "input",
        "description": "Channel B shutdown control (active-low). Drive low (V_SD < 0.8 V) to shut down channel B (I_SD ≈ 0.01 µA typ); drive high (V_SD > 2.5 V) for normal operation. Channel returns to normal within microseconds."
      },
      {
        "number": "9",
        "name": "VOUTB",
        "type": "output",
        "description": "Channel B rail-to-rail analog output. Swings to within 0.02 V of V+ (at G ≥ 10) and drives capacitive loads; short-circuit current +48/−32 mA typical."
      },
      {
        "number": "10",
        "name": "REFB",
        "type": "input",
        "description": "Channel B output reference/offset input. The channel B output is referenced to this pin; commonly tied to mid-supply (V+/2) for single-supply bipolar signals, or to ground for unipolar signals."
      },
      {
        "number": "11",
        "name": "V+",
        "type": "power_in",
        "description": "Positive supply for both channels. Specified 2.7 V to 5.5 V (operating 2.5 V to 5.5 V); quiescent current 415 µA/channel typ, 490 µA max."
      },
      {
        "number": "12",
        "name": "REFA",
        "type": "input",
        "description": "Channel A output reference/offset input. The channel A output is referenced to this pin; commonly tied to mid-supply (V+/2) for single-supply bipolar signals, or to ground for unipolar signals."
      },
      {
        "number": "13",
        "name": "VOUTA",
        "type": "output",
        "description": "Channel A rail-to-rail analog output. Swings to within 0.02 V of V+ (at G ≥ 10) and drives capacitive loads; short-circuit current +48/−32 mA typical."
      },
      {
        "number": "14",
        "name": "ShutdownA",
        "type": "input",
        "description": "Channel A shutdown control (active-low). Drive low (V_SD < 0.8 V) to shut down channel A (I_SD ≈ 0.01 µA typ); drive high (V_SD > 2.5 V) for normal operation."
      }
    ],
    "provenance": {
      "extractor": "ds2sf",
      "datasheet": {
        "url": "https://wmsc.lcsc.com/wmsc/upload/file/pdf/v2/lcsc/2302221730_Texas-Instruments-INA2332AIPWR_C962973.pdf",
        "pages": 22,
        "sha256": "b9356e8ad696bf4c",
        "source_tier": "lcsc"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 14,
        "described": 14,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "ina2332aipwr.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          6.4,
          5,
          1
        ],
        "zmin_mm": 0,
        "centre_offset_mm": 0,
        "footprint_binding": "identity",
        "sha256": "3ee5786aae56190997aa793ba3cfc003fd616782770e29719b4562f012982245",
        "checked": "2026-10-07",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "ina2332aipwr-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          6.4,
          5,
          1
        ],
        "zmin_mm": 0,
        "centre_offset_mm": 0,
        "footprint_binding": "identity",
        "sha256": "4de97270a40e5e84723012f1d43b0d63acf8dde2913bc7256297419a5dead9a0",
        "checked": "2026-10-07",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  },
  "metadata": {
    "specs": {
      "Manufacturer": "Texas Instruments",
      "Package": "TSSOP-14",
      "Category": "Op-amp/Cmp",
      "Pins": "14"
    }
  },
  "variants": [
    {
      "mpn": "INA2332AIPWR",
      "kind": "packaging"
    },
    {
      "mpn": "INA2332AIPWRIPWT",
      "kind": "packaging"
    },
    {
      "mpn": "INA2332AIPWRIDGKR",
      "kind": "packaging"
    },
    {
      "mpn": "INA2332AIPWRIDGKT",
      "kind": "packaging"
    }
  ],
  "sections": [
    "hero",
    "viewers",
    "readme",
    "breadcrumbs",
    "info"
  ],
  "discovery_triggers": [
    "ina2332aipwr"
  ],
  "discovery_pitch": "INA2332AIPWR (Texas Instruments) component page with datasheet-verified CAD.",
  "author": {
    "name": "Ray"
  },
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "ina2332aipwr.kicad_sym",
    "ina2332aipwr.kicad_mod",
    "ina2332aipwr.glb",
    "ina2332aipwr.step",
    "ina2332aipwr.lbr",
    "docs/hero.png",
    "docs/ina2332aipwr-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html"
  ],
  "visibility": {
    "public": true
  },
  "updated_at": "2026-09-24T22:39:57.994Z"
}