INA228AQDGSRQ1

{
 "schema": "adom/verification@1",
 "part": "INA228AQDGSRQ1",
 "variants": [],
 "entries": [
  {
   "date": "2026-10-16",
   "by": {
    "name": "Claude (AI build)",
    "handle": "claude"
   },
   "status": "superseded",
   "title": "Automated build checks (awaiting human validation)",
   "scope": [
    "symbol",
    "footprint",
    "3d",
    "pins"
   ],
   "variants": [
    "*"
   ],
   "checks": [
    {
     "text": "Footprint extracted pad-for-pad from the source board and normalized to the footprint frame (back-side parts un-mirrored)",
     "result": "pass"
    },
    {
     "text": "3D model seated z=0 at footprint origin (placement inverse; method centroid-matched to KiCad library models on 59 cases)",
     "result": "pass"
    },
    {
     "text": "adom-lbr generate + lint passed",
     "result": "pass"
    },
    {
     "text": "10 of 10 pins described from the datasheet (adom-ds2sf, page-cited)",
     "result": "pass"
    },
    {
     "text": "Not yet checked by a person: land pattern vs datasheet, pin-1/orientation, 3D body vs drawing",
     "result": "note"
    }
   ],
   "evidence": [
    {
     "label": "datasheet",
     "href": "docs/ina228aqdgsrq1-datasheet.pdf"
    }
   ],
   "files": {
    "ina228aqdgsrq1.kicad_sym": "e528fe0e80509dbe415551d53662c3006a58b93ffe2d94c9c06664669eb7f044",
    "ina228aqdgsrq1.kicad_mod": "2c81542702de8614d4c384d64f4055c5bd42729be2098805d21dd727a356cc51",
    "ina228aqdgsrq1.step": "39602ed75f3c6c524a0e4bab680480a2804b32aa5aa5eb0d979f088f4fb9c652"
   }
  },
  {
   "date": "2026-10-16",
   "by": {
    "name": "Claude (AI build)",
    "handle": "claude"
   },
   "status": "superseded",
   "title": "Footprint is KiCad Package_SO:TSSOP-10_3x3mm_P0.5mm while the datasheet package is DGS (VS...",
   "scope": [
    "review"
   ],
   "variants": [
    "*"
   ],
   "checks": [
    {
     "text": "Footprint is KiCad Package_SO:TSSOP-10_3x3mm_P0.5mm while the datasheet package is DGS (VSSOP-10) and the KiCad INA228 symbol filters for VSSOP-10; confirm the land pattern against the DGS package drawing.",
     "result": "note"
    }
   ],
   "evidence": [],
   "files": {}
  },
  {
   "date": "2026-10-16",
   "by": {
    "name": "Claude (AI build)",
    "handle": "claude"
   },
   "status": "superseded",
   "title": "Symbol pin names changed to the datasheet spelling (ALERT, VBUS, IN-, IN+); the board symb...",
   "scope": [
    "review"
   ],
   "variants": [
    "*"
   ],
   "checks": [
    {
     "text": "Symbol pin names changed to the datasheet spelling (ALERT, VBUS, IN-, IN+); the board symbol had ~{Alert}, Vbus, Vin-, Vin+.",
     "result": "note"
    }
   ],
   "evidence": [],
   "files": {}
  },
  {
   "date": "2026-10-27",
   "by": {
    "name": "Claude, at Caleb Taylor's request",
    "handle": "claude"
   },
   "status": "verified",
   "title": "Validated against TI's INA228-Q1 datasheet (SLYS022A, revised June 2021)",
   "scope": [
    "symbol",
    "footprint",
    "3d",
    "pins"
   ],
   "variants": [
    "*"
   ],
   "checks": [
    {
     "text": "Datasheet: the page already carries TI's current edition (SLYS022A, June 2020, revised June 2021; sha256 72bbe6e1bf379bb3 matches ti.com/lit/ds/symlink/ina228-q1.pdf fetched 2026-10-27); edition now recorded",
     "result": "pass"
    },
    {
     "text": "All 10 pins match Table 5-1 and Figure 5-1 (DGS 10-pin VSSOP, p.3) by number and name (A1, A0, ALERT, SDA, SCL, VS, GND, VBUS, IN-, IN+; the datasheet prints IN– with a typographic dash, ALERT has no overbar); no renames needed",
     "result": "pass"
    },
    {
     "text": "Pin types agree with Table 5-1: A0/A1/SCL digital inputs, SDA digital input/output (bidirectional), ALERT open-drain digital output, VBUS/IN+/IN- analog inputs, VS power supply, GND ground",
     "result": "pass"
    },
    {
     "text": "All 10 descriptions rewritten to Table 5-1 wording (p.3); the earlier text added facts not in the pin table (2.94 MHz, 16 addresses, 1 MΩ, decoupling advice)",
     "result": "pass"
    },
    {
     "text": "Orderable INA228AQDGSRQ1 is VSSOP (DGS), 10 pins, 2500 large T&R, marking 228Q (Package Option Addendum, p.43)",
     "result": "pass"
    },
    {
     "text": "Footprint vs DGS0010A (p.47-48): the open item asked to confirm the KiCad TSSOP-10_3x3mm_P0.5mm land against DGS; it has 10 pads 1.45 x 0.30 mm at e = 0.50 mm, as TI's land pattern example (10X 1.45 x 0.3, 8X 0.5); pad centres 4.30 mm apart vs TI's (4.4) reference, both cover the lead (E 4.75-5.05, L 0.4-0.7); pad width 0.30 over b 0.17-0.27; no exposed pad; pin 1 top-left, pins 1-5 down the left side as Figure 5-1",
     "result": "pass"
    },
    {
     "text": "3D body 4.90 x 3.00 x 1.10 mm against E 4.75-5.05 (lead span), D 2.9-3.1, A 1.1 max (p.47); seated on z = 0, centred on the pads",
     "result": "pass"
    },
    {
     "text": "DigiKey 296-INA228AQDGSRQ1TR-ND (tape and reel; DigiKey product URL names INA228AQDGSRQ1) and Mouser 595-INA228AQDGSRQ1 kept and added to specs",
     "result": "pass"
    },
    {
     "text": "Symbol and footprint Datasheet properties point at the manufacturer datasheet URL",
     "result": "pass"
    },
    {
     "text": "Symbol Datasheet / MPN / Manufacturer / DigiKey / Mouser / LCSC properties agree with page.json; footprint Datasheet property points at the manufacturer datasheet URL",
     "result": "pass"
    },
    {
     "text": "component-page-verify: all checks pass",
     "result": "pass"
    }
   ],
   "evidence": [
    {
     "label": "datasheet (Texas Instruments)",
     "href": "https://www.ti.com/lit/ds/symlink/ina228-q1.pdf"
    }
   ],
   "files": {
    "ina228aqdgsrq1.kicad_sym": "0a28f40c6c7a46137e0b7a23fec7f10a6393546db71b7aafa7b96fea0ef5fc34",
    "ina228aqdgsrq1.kicad_mod": "42b78c03f041c471b6c88159390b88bca2fb12572a2387fdbb16a7bceeea02f2",
    "ina228aqdgsrq1.step": "39602ed75f3c6c524a0e4bab680480a2804b32aa5aa5eb0d979f088f4fb9c652"
   }
  }
 ]
}