component

INA228AQDGSRQ1

Public Made by Adom

by adom

Texas Instruments Power Supply Controllers, Monitors, MSOP-10-3mm. KiCad symbol, footprint and 3D as used on Adom boards; pin functions from the manufacturer datasheet.

componentamplifiers/comparatorsina228aqdgsrq1board-derived

Verified INA228AQDGSRQ1

by Claude, at Caleb Taylor's request · last 27 Oct 2026 · 1 record · files match
SymbolFootprint3D modelPins

Verification log 4 records

27 Oct 2026Claude, at Caleb Taylor's requestValidated against TI's INA228-Q1 datasheet (SLYS022A, revised June 2021)files match
SymbolFootprint3D modelPinsfor all variants
  • ✓Datasheet: the page already carries TI's current edition (SLYS022A, June 2020, revised June 2021; sha256 72bbe6e1bf379bb3 matches ti.com/lit/ds/symlink/ina228-q1.pdf fetched 2026-10-27); edition now recorded
  • ✓All 10 pins match Table 5-1 and Figure 5-1 (DGS 10-pin VSSOP, p.3) by number and name (A1, A0, ALERT, SDA, SCL, VS, GND, VBUS, IN-, IN+; the datasheet prints IN– with a typographic dash, ALERT has no overbar); no renames needed
  • ✓Pin types agree with Table 5-1: A0/A1/SCL digital inputs, SDA digital input/output (bidirectional), ALERT open-drain digital output, VBUS/IN+/IN- analog inputs, VS power supply, GND ground
  • ✓All 10 descriptions rewritten to Table 5-1 wording (p.3); the earlier text added facts not in the pin table (2.94 MHz, 16 addresses, 1 MΩ, decoupling advice)
  • ✓Orderable INA228AQDGSRQ1 is VSSOP (DGS), 10 pins, 2500 large T&R, marking 228Q (Package Option Addendum, p.43)
  • ✓Footprint vs DGS0010A (p.47-48): the open item asked to confirm the KiCad TSSOP-10_3x3mm_P0.5mm land against DGS; it has 10 pads 1.45 x 0.30 mm at e = 0.50 mm, as TI's land pattern example (10X 1.45 x 0.3, 8X 0.5); pad centres 4.30 mm apart vs TI's (4.4) reference, both cover the lead (E 4.75-5.05, L 0.4-0.7); pad width 0.30 over b 0.17-0.27; no exposed pad; pin 1 top-left, pins 1-5 down the left side as Figure 5-1
  • ✓3D body 4.90 x 3.00 x 1.10 mm against E 4.75-5.05 (lead span), D 2.9-3.1, A 1.1 max (p.47); seated on z = 0, centred on the pads
  • ✓DigiKey 296-INA228AQDGSRQ1TR-ND (tape and reel; DigiKey product URL names INA228AQDGSRQ1) and Mouser 595-INA228AQDGSRQ1 kept and added to specs
  • ✓Symbol and footprint Datasheet properties point at the manufacturer datasheet URL
  • ✓Symbol Datasheet / MPN / Manufacturer / DigiKey / Mouser / LCSC properties agree with page.json; footprint Datasheet property points at the manufacturer datasheet URL
  • ✓component-page-verify: all checks pass
Evidencedatasheet (Texas Instruments)
Verified files✓ ina228aqdgsrq1.kicad_sym✓ ina228aqdgsrq1.kicad_mod✓ ina228aqdgsrq1.step
16 Oct 2026Claude (AI build)Symbol pin names changed to the datasheet spelling (ALERT, VBUS, IN-, IN+); the board symb...superseded
reviewfor all variants
  • •Symbol pin names changed to the datasheet spelling (ALERT, VBUS, IN-, IN+); the board symbol had ~{Alert}, Vbus, Vin-, Vin+.
16 Oct 2026Claude (AI build)Footprint is KiCad Package_SO:TSSOP-10_3x3mm_P0.5mm while the datasheet package is DGS (VS...superseded
reviewfor all variants
  • •Footprint is KiCad Package_SO:TSSOP-10_3x3mm_P0.5mm while the datasheet package is DGS (VSSOP-10) and the KiCad INA228 symbol filters for VSSOP-10; confirm the land pattern against the DGS package drawing.
16 Oct 2026Claude (AI build)Automated build checks (awaiting human validation)superseded
SymbolFootprint3D modelPinsfor all variants
  • ✓Footprint extracted pad-for-pad from the source board and normalized to the footprint frame (back-side parts un-mirrored)
  • ✓3D model seated z=0 at footprint origin (placement inverse; method centroid-matched to KiCad library models on 59 cases)
  • ✓adom-lbr generate + lint passed
  • ✓10 of 10 pins described from the datasheet (adom-ds2sf, page-cited)
  • •Not yet checked by a person: land pattern vs datasheet, pin-1/orientation, 3D body vs drawing
Evidencedatasheet
Verified files! ina228aqdgsrq1.kicad_sym! ina228aqdgsrq1.kicad_mod✓ ina228aqdgsrq1.step
Spot something wrong? Report it as an issue Propose a fix Records are signed by members of adom.
Overview Files Discover Packages Releases Dependencies Issues Breadcrumbs Pull Requests Activity
main
ina228aqdgsrq1 / ina228aqdgsrq1.kicad_mod
HistoryDownload
Caleb Publish 0.1.2 5ec1bf1 1d ago
123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211212213214215216217218219220221222223224225226227228229230231232233234235236237238239240241242243244245246247248249250251252253254255256257258259260261262263264265266267268269270271272273274275276277278279280281282283284285286287288289290291292293294295296297298299300301302303304305306307308309310311312313314315316317318319320321322323324325326327328329330331332333334335336337338339340341342343344345346347348349350351352353354355356357358359360361362363364365366367368369370371372373374375376377378379380381382383384385386387388389390391392393394395
(footprint "INA228AQDGSRQ1"
	(layer "F.Cu")
	(descr "TSSOP, 10 Pin (https://www.ti.com/lit/ml/mpds035c/mpds035c.pdf, https://www.ti.com/lit/ds/symlink/ads1115.pdf#page=50, https://www.nxp.com/docs/en/package-information/SOT552-1.pdf)"
	)
	(tags "TSSOP SO Texas_DGS0010A Texas_VSSOP-10 NXP_SOT552-1 MSOP-10_3x3mm_P0.5mm VSSOP-10_3x3mm_P0.5mm"
	)
	(property "Reference" "REF**"
		(at 0 -2.450001 180)
		(layer "F.SilkS")
		(hide yes)
		(uuid "534b72a6-28b9-45e6-9561-63b60de40a4c")
		(effects
			(font (size 1 1) (thickness 0.15))
		)
	)
	(property "Value" "INA228AQDGSRQ1"
		(at 0 2.450001 180)
		(layer "F.Fab")
		(hide yes)
		(uuid "5c5bd9b5-e954-44ca-a460-e209d80f0169")
		(effects
			(font (size 1 1) (thickness 0.15))
		)
	)
	(property "Datasheet" "https://www.ti.com/lit/ds/symlink/ina228-q1.pdf"
		(at 0 0 180)
		(layer "F.Fab")
		(hide yes)
		(uuid "b03c76d0-5c58-43c4-b9a8-27dc849b110b")
		(effects
			(font (size 1.27 1.27))
		)
	)
	(property "Description" "High-Side or Low-Side Measurement, Bi-Directional Current and Power Monitor (0-85V) with I2C, SMBus-, and PMBus-Compatible Interface, VSSOP-10"
		(at 0 0 180)
		(layer "F.Fab")
		(hide yes)
		(uuid "1562d836-d1a6-4d27-a982-f06c7d02383f")
		(effects
			(font (size 1.27 1.27))
		)
	)
	(property "PN" "INA228AQDGSRQ1"
		(at 0 0)
		(unlocked yes)
		(layer "F.Fab")
		(hide yes)
		(uuid "8bf9a3de-49ea-45f5-86f0-d523cdc5f7f2")
		(effects
			(font (size 1 1) (thickness 0.15))
		)
	)
	(property "LCSC" "C5214669"
		(at 0 0)
		(unlocked yes)
		(layer "F.Fab")
		(hide yes)
		(uuid "14cae89f-c501-452c-b61e-c2d40b9db179")
		(effects
			(font (size 1 1) (thickness 0.15))
		)
	)
	(property "MFR" "Texas Instruments"
		(at 0 0)
		(unlocked yes)
		(layer "F.Fab")
		(hide yes)
		(uuid "ccc4b665-c912-443f-97b5-a1934198ba15")
		(effects
			(font (size 1 1) (thickness 0.15))
		)
	)
	(property ki_fp_filters "VSSOP*3x3mm*P0.5mm*")
	(units
		(unit (name "A") (pins "8" "10" "9" "6" "7" "1" "2" "4" "5" "3"))
	)
	(attr smd exclude_from_pos_files exclude_from_bom)
	(duplicate_pad_numbers_are_jumpers no)
	(fp_line
		(start -1.61 1.61)
		(end -1.609999 1.41)
		(stroke (width 0.12) (type solid))
		(layer "F.SilkS")
		(uuid "80b520fa-48f7-44b0-b990-fca235282a97")
	)
	(fp_line
		(start 1.61 1.61)
		(end -1.61 1.61)
		(stroke (width 0.12) (type solid))
		(layer "F.SilkS")
		(uuid "d360e6db-1e1c-492f-802b-2b9ea0510bc4")
	)
	(fp_line
		(start 1.609999 1.41)
		(end 1.61 1.61)
		(stroke (width 0.12) (type solid))
		(layer "F.SilkS")
		(uuid "18354e01-019e-4e50-93ae-73099f858a12")
	)
	(fp_line
		(start -1.609999 -1.41)
		(end -1.61 -1.61)
		(stroke (width 0.12) (type solid))
		(layer "F.SilkS")
		(uuid "44865d33-cc6b-46c2-bb3e-7c57493af318")
	)
	(fp_line
		(start -1.61 -1.61)
		(end 1.61 -1.61)
		(stroke (width 0.12) (type solid))
		(layer "F.SilkS")
		(uuid "012a59aa-a96d-44db-8327-94317d308f4b")
	)
	(fp_line
		(start 1.61 -1.61)
		(end 1.609999 -1.41)
		(stroke (width 0.12) (type solid))
		(layer "F.SilkS")
		(uuid "f10f820a-a7a8-46a6-b8bf-14bda2008eb6")
	)
	(fp_poly
		(pts (xy -2.16 -1.41) (xy -2.4 -1.74) (xy -1.92 -1.74))
		(stroke (width 0.12) (type solid))
		(fill yes)
		(layer "F.SilkS")
		(uuid "00e04102-9ee0-434e-a5ac-4e307044b510")
	)
	(fp_line
		(start -1.75 1.75)
		(end -1.749999 1.4)
		(stroke (width 0.05) (type solid))
		(layer "F.CrtYd")
		(uuid "60f7ede2-cfd2-491d-91e8-0053418dc68c")
	)
	(fp_line
		(start 1.75 1.75)
		(end -1.75 1.75)
		(stroke (width 0.05) (type solid))
		(layer "F.CrtYd")
		(uuid "a767eea8-35fe-4d9f-b8c4-8e0ebe13171f")
	)
	(fp_line
		(start -3.13 1.4)
		(end -3.13 -1.4)
		(stroke (width 0.05) (type solid))
		(layer "F.CrtYd")
		(uuid "dc3d105a-7554-40d0-bf1c-4a67cfda6822")
	)
	(fp_line
		(start -1.749999 1.4)
		(end -3.13 1.4)
		(stroke (width 0.05) (type solid))
		(layer "F.CrtYd")
		(uuid "6df3f72e-5efb-47c8-b287-9afb4b9cc5db")
	)
	(fp_line
		(start 1.749999 1.4)
		(end 1.75 1.75)
		(stroke (width 0.05) (type solid))
		(layer "F.CrtYd")
		(uuid "bb91c980-561d-4798-bb51-1cb7299283ee")
	)
	(fp_line
		(start 3.13 1.4)
		(end 1.749999 1.4)
		(stroke (width 0.05) (type solid))
		(layer "F.CrtYd")
		(uuid "3feef66a-0bd6-4aa3-a84a-7acaef170f49")
	)
	(fp_line
		(start -3.13 -1.4)
		(end -1.749999 -1.4)
		(stroke (width 0.05) (type solid))
		(layer "F.CrtYd")
		(uuid "de5e49e3-200b-4067-9c7d-ab18b5fca26b")
	)
	(fp_line
		(start -1.749999 -1.4)
		(end -1.75 -1.75)
		(stroke (width 0.05) (type solid))
		(layer "F.CrtYd")
		(uuid "acca73cb-5344-404b-a60b-d9a739202742")
	)
	(fp_line
		(start 1.749999 -1.4)
		(end 3.13 -1.4)
		(stroke (width 0.05) (type solid))
		(layer "F.CrtYd")
		(uuid "7200e1ac-70dd-431c-b161-2f198f9f2cec")
	)
	(fp_line
		(start 3.13 -1.4)
		(end 3.13 1.4)
		(stroke (width 0.05) (type solid))
		(layer "F.CrtYd")
		(uuid "1e69d570-e628-4b30-a058-0501950d3f8c")
	)
	(fp_line
		(start -1.75 -1.75)
		(end 1.75 -1.75)
		(stroke (width 0.05) (type solid))
		(layer "F.CrtYd")
		(uuid "5e552c33-8643-4398-91f3-63ae98d70e70")
	)
	(fp_line
		(start 1.75 -1.75)
		(end 1.749999 -1.4)
		(stroke (width 0.05) (type solid))
		(layer "F.CrtYd")
		(uuid "9534ca73-5a14-4eab-a64c-c4182846200b")
	)
	(fp_poly
		(pts (xy -0.75 -1.5) (xy 1.5 -1.5) (xy 1.5 1.5) (xy -1.5 1.5) (xy -1.5 -0.75))
		(stroke (width 0.1) (type solid))
		(fill no)
		(layer "F.Fab")
		(uuid "c20d4980-a79e-4a55-a353-a606beb7f765")
	)
	(pad "1" smd roundrect
		(at -2.15 -1)
		(size 1.45 0.3)
		(layers "F.Cu" "F.Mask" "F.Paste")
		(roundrect_rratio 0.25)
		(teardrops
			(best_length_ratio 0.5)
			(max_length 1)
			(best_width_ratio 1)
			(max_width 2)
			(curved_edges yes)
			(filter_ratio 0.9)
			(enabled yes)
			(allow_two_segments yes)
			(prefer_zone_connections yes)
		)
	)
	(pad "2" smd roundrect
		(at -2.15 -0.5)
		(size 1.45 0.3)
		(layers "F.Cu" "F.Mask" "F.Paste")
		(roundrect_rratio 0.25)
		(teardrops
			(best_length_ratio 0.5)
			(max_length 1)
			(best_width_ratio 1)
			(max_width 2)
			(curved_edges yes)
			(filter_ratio 0.9)
			(enabled yes)
			(allow_two_segments yes)
			(prefer_zone_connections yes)
		)
	)
	(pad "3" smd roundrect
		(at -2.150001 0)
		(size 1.45 0.3)
		(layers "F.Cu" "F.Mask" "F.Paste")
		(roundrect_rratio 0.25)
		(teardrops
			(best_length_ratio 0.5)
			(max_length 1)
			(best_width_ratio 1)
			(max_width 2)
			(curved_edges yes)
			(filter_ratio 0.9)
			(enabled yes)
			(allow_two_segments yes)
			(prefer_zone_connections yes)
		)
	)
	(pad "4" smd roundrect
		(at -2.15 0.5)
		(size 1.45 0.3)
		(layers "F.Cu" "F.Mask" "F.Paste")
		(roundrect_rratio 0.25)
		(teardrops
			(best_length_ratio 0.5)
			(max_length 1)
			(best_width_ratio 1)
			(max_width 2)
			(curved_edges yes)
			(filter_ratio 0.9)
			(enabled yes)
			(allow_two_segments yes)
			(prefer_zone_connections yes)
		)
	)
	(pad "5" smd roundrect
		(at -2.15 1)
		(size 1.45 0.3)
		(layers "F.Cu" "F.Mask" "F.Paste")
		(roundrect_rratio 0.25)
		(teardrops
			(best_length_ratio 0.5)
			(max_length 1)
			(best_width_ratio 1)
			(max_width 2)
			(curved_edges yes)
			(filter_ratio 0.9)
			(enabled yes)
			(allow_two_segments yes)
			(prefer_zone_connections yes)
		)
	)
	(pad "6" smd roundrect
		(at 2.15 1)
		(size 1.45 0.3)
		(layers "F.Cu" "F.Mask" "F.Paste")
		(roundrect_rratio 0.25)
		(teardrops
			(best_length_ratio 0.5)
			(max_length 1)
			(best_width_ratio 1)
			(max_width 2)
			(curved_edges yes)
			(filter_ratio 0.9)
			(enabled yes)
			(allow_two_segments yes)
			(prefer_zone_connections yes)
		)
	)
	(pad "7" smd roundrect
		(at 2.15 0.5)
		(size 1.45 0.3)
		(layers "F.Cu" "F.Mask" "F.Paste")
		(roundrect_rratio 0.25)
		(teardrops
			(best_length_ratio 0.5)
			(max_length 1)
			(best_width_ratio 1)
			(max_width 2)
			(curved_edges yes)
			(filter_ratio 0.9)
			(enabled yes)
			(allow_two_segments yes)
			(prefer_zone_connections yes)
		)
	)
	(pad "8" smd roundrect
		(at 2.150001 0)
		(size 1.45 0.3)
		(layers "F.Cu" "F.Mask" "F.Paste")
		(roundrect_rratio 0.25)
		(teardrops
			(best_length_ratio 0.5)
			(max_length 1)
			(best_width_ratio 1)
			(max_width 2)
			(curved_edges yes)
			(filter_ratio 0.9)
			(enabled yes)
			(allow_two_segments yes)
			(prefer_zone_connections yes)
		)
	)
	(pad "9" smd roundrect
		(at 2.15 -0.5)
		(size 1.45 0.3)
		(layers "F.Cu" "F.Mask" "F.Paste")
		(roundrect_rratio 0.25)
		(teardrops
			(best_length_ratio 0.5)
			(max_length 1)
			(best_width_ratio 1)
			(max_width 2)
			(curved_edges yes)
			(filter_ratio 0.9)
			(enabled yes)
			(allow_two_segments yes)
			(prefer_zone_connections yes)
		)
	)
	(pad "10" smd roundrect
		(at 2.15 -1)
		(size 1.45 0.3)
		(layers "F.Cu" "F.Mask" "F.Paste")
		(roundrect_rratio 0.25)
		(teardrops
			(best_length_ratio 0.5)
			(max_length 1)
			(best_width_ratio 1)
			(max_width 2)
			(curved_edges yes)
			(filter_ratio 0.9)
			(enabled yes)
			(allow_two_segments yes)
			(prefer_zone_connections yes)
		)
	)
	(embedded_fonts no)
	(model "${KICAD10_3DMODEL_DIR}/Package_SO.3dshapes/TSSOP-10_3x3mm_P0.5mm.step"
		(offset (xyz 0 0 0))
		(scale (xyz 1 1 1))
		(rotate (xyz 0 0 0))
	)
)