INA228AIDGSR

@@ -10,14 +10,14 @@ INA228AIDGSR from Texas Instruments, in a VSSOP-10-0.5mm. Symbol, footprint and  | Pin | Name | Type | Function | |---|---|---|---|-| 1 | A1 | input | I2C address select pin 1. Tie to GND, SCL, SDA, or VS to select one of 16 possible I2C slave addresses. [datasheet p.3] |-| 2 | A0 | input | I2C address select pin 0. Tie to GND, SCL, SDA, or VS to select one of 16 possible I2C slave addresses. [datasheet p.3] |-| 3 | ~{Alert} | open_collector | Open-drain alert output. Active-low by default; indicates conversion ready or threshold/limit events. Requires external pull-up to VS or VIO. [datasheet p.3] |-| 4 | SDA | bidirectional | Open-drain bidirectional I2C serial data. Requires external pull-up to the bus voltage (typically VS or VIO rail up to 5.5V). [datasheet p.3] |-| 5 | SCL | input | I2C serial clock input. Supports high-speed mode up to 2.94MHz. Requires external pull-up resistor. [datasheet p.3] |-| 6 | VS | power_in | Device supply voltage input. Operates from 2.7V to 5.5V. Bypass to GND with a 0.1µF ceramic capacitor placed close to the pin. [datasheet p.3] |-| 7 | GND | power_in | Ground reference for the device supply and digital I/O. [datasheet p.3] |-| 8 | Vbus | input | Bus voltage sense input. High-impedance input (≈1MΩ) that measures the common-mode bus voltage up to 85V with 195.3125µV LSB resolution. [datasheet p.3] |+| 1 | A1 | input | I²C address select pin A1. Tie to GND, SCL, SDA, or VS to select one of 16 device addresses. [datasheet p.3] |+| 2 | A0 | input | I²C address select pin A0. Tie to GND, SCL, SDA, or VS to select one of 16 device addresses. [datasheet p.3] |+| 3 | ~{Alert} | open_collector | Open-drain alert output, active low. Default state is active low; requires external pull-up resistor. [datasheet p.3] |+| 4 | SDA | bidirectional | I²C serial data line. Open-drain bidirectional; requires external pull-up. Supports fast mode (400 kHz) and high-speed mode (up to 2.94 MHz). [datasheet p.3] |+| 5 | SCL | input | I²C serial clock input. Requires external pull-up resistor. [datasheet p.3] |+| 6 | VS | power_in | Device power supply input, 2.7 V to 5.5 V. Bypass with a 0.1 µF ceramic capacitor to GND close to the pin. [datasheet p.3] |+| 7 | GND | power_in | Ground reference for the device. [datasheet p.3] |+| 8 | Vbus | input | Bus voltage analog input, 0 V to 85 V. High-impedance input (≈1 MΩ) that measures the system bus voltage for power/energy calculations. [datasheet p.3] | | 9 | Vin- | input | _not yet described_ | | 10 | Vin+ | input | _not yet described_ | @@ -42,7 +42,7 @@ INA228AIDGSR from Texas Instruments, in a VSSOP-10-0.5mm. Symbol, footprint and  ## Provenance -- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/cn/lit/gpn/ina228) (sha256 `c6128fa9c710624e`, retrieved 2026-10-08, tier: lcsc)+- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/lit/ds/symlink/ina228.pdf) (sha256 `a138d39eeee04f83`, retrieved 2026-10-08, tier: mfr) - **CAD:** KiCad official libraries (CC-BY-SA 4.0); footprint and symbol as used on Adom boards. - **Pins:** KiCad symbol from the source board + adom-ds2sf datasheet extraction (claude-opus-4-7). 

⋯ 1 unchanged line ⋯

@@ -16,7 +16,28 @@ 				(font (size 1.27 1.27)) 			) 		)-		(property "Manufacturer" "Texas Instruments" (at 0 0 0) (effects (font (size 1.27 1.27)) (hide yes))) (property "DigiKey" "296-INA228AIDGSRTR-ND" (at 0 0 0) (effects (font (size 1.27 1.27)) (hide yes))) (property "Mouser" "595-INA228AIDGSR" (at 0 0 0) (effects (font (size 1.27 1.27)) (hide yes))) (property "Value" "INA228AIDGSR"+		(property "Manufacturer" "Texas Instruments"+			(at 0 0 0)+			(effects+				(font (size 1.27 1.27))+				(hide yes)+			)+		)+		(property "DigiKey" "296-INA228AIDGSRTR-ND"+			(at 0 0 0)+			(effects+				(font (size 1.27 1.27))+				(hide yes)+			)+		)+		(property "Mouser" "595-INA228AIDGSR"+			(at 0 0 0)+			(effects+				(font (size 1.27 1.27))+				(hide yes)+			)+		)+		(property "Value" "INA228AIDGSR" 			(at 3.81 11.43 0) 			(show_name no) 			(do_not_autoplace no)@@ -24,7 +45,7 @@ 				(font (size 1.27 1.27)) 			) 		)-		(property "Footprint" "Package_SO:VSSOP-10_3x3mm_P0.5mm"+		(property "Footprint" "Package_SO:TSSOP-10_3x3mm_P0.5mm" 			(at 20.32 -11.43 0) 			(show_name no) 			(do_not_autoplace no)@@ -33,7 +54,7 @@ 				(font (size 1.27 1.27)) 			) 		)-		(property "Datasheet" "https://www.ti.com/cn/lit/gpn/ina228"+		(property "Datasheet" "https://www.ti.com/lit/ds/symlink/ina228.pdf" 			(at 8.89 -2.54 0) 			(show_name no) 			(do_not_autoplace no)@@ -42,7 +63,7 @@ 				(font (size 1.27 1.27)) 			) 		)-		(property "Description" "High-Side or Low-Side Measurement, Bi-Directional Current and Power Monitor (0-85V) with I2C, SMBus-, and PMBus-Compatible Interface, VSSOP-10"+		(property "Description" "-300mV~85V -40℃~+125℃ 0.01uV/℃ 10mA 154dB 1uV 2.5nA 2.7V~5.5V 640uA High-side detection、Low-side detection、Bidirectional detection、Input filter、Power monitoring、Programmable threshold alarm、Integrated ADC、Enable/shutdown function ±163.84mV VSSOP-10-0.5mm Current Sense Amplifiers ROHS" 			(at 0 0 0) 			(show_name no) 			(do_not_autoplace no)

@@ -50,7 +50,7 @@ <layer number="98" name="Guide" color="6" fill="1" visible="yes" active="yes"/> </layers> <library>-<description>High-Side or Low-Side Measurement, Bi-Directional Current and Power Monitor (0-85V) with I2C, SMBus-, and PMBus-Compatible Interface, VSSOP-10</description>+<description>-300mV~85V -40℃~+125℃ 0.01uV/℃ 10mA 154dB 1uV 2.5nA 2.7V~5.5V 640uA High-side detection、Low-side detection、Bidirectional detection、Input filter、Power monitoring、Programmable threshold alarm、Integrated ADC、Enable/shutdown function ±163.84mV VSSOP-10-0.5mm Current Sense Amplifiers ROHS</description> <packages> <package name="INA228AIDGSR">   <description>10 pads, 5.8 x 2.3 mm. TSSOP, 10 Pin</description>@@ -88,7 +88,7 @@ </packages> <symbols> <symbol name="INA228AIDGSR">-  <description>High-Side or Low-Side Measurement, Bi-Directional Current and Power Monitor (0-85V) with I2C, SMBus-, and PMBus-Compatible Interface, VSSOP-10</description>+  <description>-300mV~85V -40℃~+125℃ 0.01uV/℃ 10mA 154dB 1uV 2.5nA 2.7V~5.5V 640uA High-side detection、Low-side detection、Bidirectional detection、Input filter、Power monitoring、Programmable threshold alarm、Integrated ADC、Enable/shutdown function ±163.84mV VSSOP-10-0.5mm Current Sense Amplifiers ROHS</description>   <wire x1="-12.7" y1="12.7" x2="12.7" y2="12.7" width="0.254" layer="94"/>   <wire x1="12.7" y1="12.7" x2="12.7" y2="-12.7" width="0.254" layer="94"/>   <wire x1="12.7" y1="-12.7" x2="-12.7" y2="-12.7" width="0.254" layer="94"/>@@ -109,7 +109,7 @@ </symbols> <devicesets> <deviceset name="INA228AIDGSR" prefix="U">-  <description>High-Side or Low-Side Measurement, Bi-Directional Current and Power Monitor (0-85V) with I2C, SMBus-, and PMBus-Compatible Interface, VSSOP-10</description>+  <description>-300mV~85V -40℃~+125℃ 0.01uV/℃ 10mA 154dB 1uV 2.5nA 2.7V~5.5V 640uA High-side detection、Low-side detection、Bidirectional detection、Input filter、Power monitoring、Programmable threshold alarm、Integrated ADC、Enable/shutdown function ±163.84mV VSSOP-10-0.5mm Current Sense Amplifiers ROHS</description>   <gates>     <gate name="G$1" symbol="INA228AIDGSR" x="0" y="0"/>   </gates>@@ -131,7 +131,7 @@         <technology name="">           <attribute name="MPN" value="INA228AIDGSR" constant="no"/>           <attribute name="MANUFACTURER" value="Texas Instruments" constant="no"/>-          <attribute name="DATASHEET" value="https://www.ti.com/cn/lit/gpn/ina228" constant="no"/>+          <attribute name="DATASHEET" value="https://www.ti.com/lit/ds/symlink/ina228.pdf" constant="no"/>           <attribute name="ADOM_WIKI" value="https://wiki.adom.inc/adom/ina228aidgsr" constant="no"/>           <attribute name="MOUSER_PN" value="595-INA228AIDGSR" constant="no"/>           <attribute name="DIGIKEY_PN" value="296-INA228AIDGSRTR-ND" constant="no"/>

@@ -49,7 +49,7 @@     }    ],    "files": {-    "ina228aidgsr.kicad_sym": "d43932e8b362fcfb398f512d679c59adc7cea4702078fdaa89477b5e26496159",+    "ina228aidgsr.kicad_sym": "b7ebc7c43645df2bc5f8833f2770f6c5bde12f532103e10325910a23132f11ae",     "ina228aidgsr.kicad_mod": "82f79468afd0a26f34d6e4ed54a366b7e2d44c13ff6d20ac51c631f97a32abcd",     "ina228aidgsr.step": "39602ed75f3c6c524a0e4bab680480a2804b32aa5aa5eb0d979f088f4fb9c652"    }