Generated by kicad-footprint-generator · KiCad file format 20260206
INA226AIDGST
Texas Instruments · Global Sourcing Parts · VSSOP-10-0.5mm
INA226AIDGST from Texas Instruments, in a VSSOP-10-0.5mm. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | A1 | input | Digital address selection input; connect to GND, SCL, SDA, or VS to select one of 16 I2C target addresses per Table 6-2. |
| 2 | A0 | input | Digital address selection input; connect to GND, SCL, SDA, or VS to select one of 16 I2C target addresses per Table 6-2. |
| 3 | Alert | output | Open-drain digital output for multi-function alert signaling with programmable thresholds for shunt voltage, bus voltage, or power limit detection. |
| 4 | SDA | bidirectional | I2C/SMBus open-drain serial data line input/output, rated for 0V to 6V. |
| 5 | SCL | input | I2C/SMBus open-drain serial clock line input, rated for GND-0.3V to VVS+0.3V. |
| 6 | VS | power_in | Positive power supply input, 2.7V to 5.5V operating range, typical quiescent current 330μA. |
| 7 | GND | power_in | Analog and digital ground reference. |
| 8 | VBUS | power_in | Bus voltage measurement input, 0V to 36V monitoring range with 1.25mV LSB resolution. |
| 9 | IN- | input | Shunt resistor load-side differential input with ±40V differential range (VIN+-VIN-) and -0.3V to 40V common-mode range. |
| 10 | IN+ | input | Shunt resistor supply-side differential input with ±40V differential range (VIN+-VIN-) and -0.3V to 40V common-mode range. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | VSSOP-10-0.5mm |
| Category | Global Sourcing Parts |
| Pins | 10 |
CAD (KiCad official)
- Symbol:
INA226AIDGST - Footprint:
Package_SO:MSOP-10_3x3mm_P0.5mm - 3D model: VSSOP-10-0.5mm (KiCad packages3D, STEP)
- 3D model files:
ina226aidgst-etched.step/ina226aidgst-etched.glbcarry the MPN shown as a virtual identification layer on the package in a toggleableAdom.LaserEtchgroup (Fusion-ready);ina226aidgst.step/ina226aidgst.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (39 pp, sha256
6864e1d63c796c72, retrieved 2026-10-03, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-4-5-20251001(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
Marking correction in0.1.1
The original single-line mark crossed the usable package band. The shared mark planner now places two readable lines within the package face and preserves pin1. The gate and visual check pass. The nominal KiCad-derived base STEP is unchanged; the0.005mm raised identification layer is not a factory mark or a claim of physical engraving. See correction record.