Generated by kicad-footprint-generator · KiCad file format 20260206
INA220BIDGST
Texas Instruments · Monitors & Reset Circuits · VSSOP-10-0.5mm
INA220BIDGST from Texas Instruments, in a VSSOP-10-0.5mm. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | A1 | input | Address pin; connect to GND, SCL, SDA, or VS to set the device I2C address per Table 1. |
| 2 | A0 | input | Address pin; connect to GND, SCL, SDA, or VS to set the device I2C address per Table 1. |
| 3 | NC | unconnected | No internal connection. |
| 4 | SDA | bidirectional | Serial bus data line (open-drain digital I/O); voltage range GND - 0.3 V to 6 V. |
| 5 | SCL | input | Serial bus clock line; voltage range GND - 0.3 V to VS + 0.3 V. |
| 6 | VS | power_in | Analog power supply, 3 V to 5.5 V. |
| 7 | GND | power_in | Analog ground. |
| 8 | VBUS | power_in | Bus voltage input, with voltage range -0.3 V to 26 V. |
| 9 | IN- | input | Negative differential shunt voltage input; connect to the negative side of the shunt resistor, bus voltage is measured from this pin to ground, and it must stay within -0.3 V to 26 V. |
| 10 | IN+ | input | Positive differential shunt voltage input; connect to the positive side of the shunt resistor, and it must stay within -0.3 V to 26 V. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | VSSOP-10-0.5mm |
| Category | Power Supply Chip |
| Pins | 10 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply voltage | VS | 6 | V | 5 | |||
| Differential input voltage (VIN+)-(VIN-) | -26 | 26 | V | IN+ and IN- pins must not exceed -0.3 to 26 V | 5 | ||
| Common-mode input voltage | -0.3 | 26 | V | (VIN+ + VIN-)/2 | 5 | ||
| Voltage at VBUS pin | VVBUS | -0.3 | 26 | V | 5 | ||
| Voltage at SDA pin | VSDA | 6 | V | min is GND, 0.3 | 5 | ||
| Input current into any pin | 5 | mA | 5 | ||||
| Open-drain digital output current | 10 | mA | 5 | ||||
| Operating temperature | -40 | 125 | °C | 5 | |||
| Junction temperature | TJ | 150 | °C | 5 | |||
| Storage temperature | Tstg | -65 | 150 | °C | 5 | ||
| Ambient temperature | TA | -40 | 85 | ºC | 5 | ||
| Common-mode voltage | VCM | 12 | V | (VIN+ + VIN-)/2 | 5 | ||
| Supply voltage | VS | 3.3 | V | 5 | |||
| Junction-to-ambient thermal resistance | RθJA | 165.4 | °C/W | DGS (VSSOP) 10 pins | 5 | ||
| Junction-to-case (top) thermal resistance | RθJC(top) | 53.2 | °C/W | DGS (VSSOP) 10 pins | 5 | ||
| Junction-to-board thermal resistance | RθJB | 86.6 | °C/W | DGS (VSSOP) 10 pins | 5 | ||
| Operating supply range | VS | 3 | 5.5 | V | 7 | ||
| Quiescent current | IQ | 0.7 | 1 | mA | 7 | ||
| Quiescent current, power-down mode | IQ | 6 | 15 | μA | 7 | ||
| Common-mode rejection | CMR | 100 | 120 | dB | VIN+ = 0 to 26 V | 6 | |
| Offset voltage RTI | VOS | -50 | 10 | 50 | μV | PGA = /1 | 6 |
| Offset voltage RTI | VOS | -75 | 20 | 75 | μV | PGA = /2 | 6 |
| Offset voltage RTI | VOS | -75 | 30 | 75 | μV | PGA = /4 | 6 |
| Offset voltage RTI | VOS | -100 | 40 | 100 | μV | PGA = /8 | 6 |
| Current sense gain error | -40 | 40 | m% | 6 | |||
| Current measurement error | -0.3 | 0.2 | 0.3 | % | 6 | ||
| Current measurement error over temperature | -0.5 | 0.5 | % | TA = -40°C to 85°C | 6 | ||
| Bus voltage measurement error | -0.5 | 0.2 | 0.5 | % | VBUS = 12 V | 6 | |
| Bus voltage measurement error over temperature | -1 | 1 | % | TA = -40°C to 85°C | 6 | ||
| IN+ pin input leakage | -0.5 | 0.1 | 0.5 | μA | Power-down mode | 6 | |
| IN- pin input leakage | -0.5 | 0.1 | 0.5 | μA | Power-down mode | 6 | |
| Full-scale shunt voltage range | VSHUNT | 0 | 40 | mV | PGA = /1 (printed ±40) | 6 | |
| Full-scale shunt voltage range | VSHUNT | 0 | 320 | mV | PGA = /8 (printed ±320) | 6 | |
| Bus voltage range | 0 | 32 | V | BRNG = 1 | 6 | ||
| Bus voltage range | 0 | 16 | V | BRNG = 0 | 6 | ||
| ADC conversion time | 532 | 586 | μs | 12-bit | 6 | ||
| ADC conversion time | 276 | 304 | μs | 11-bit | 6 | ||
| ADC conversion time | 148 | 163 | μs | 10-bit | 6 | ||
| ADC conversion time | 84 | 93 | μs | 9-bit | 6 | ||
| SMBus timeout | 28 | 35 | ms | 6 | |||
| Leakage input current | 0.1 | 1 | μA | 0 ≤ VIN ≤ VS | 7 | ||
| Logic 0 output level | 0.15 | 0.4 | V | ISINK = 3 mA | 7 | ||
| High-level output leakage current | 0.1 | 1 | μA | VOUT = VS | 7 | ||
| SCL operating frequency, fast mode | ƒ(SCL) | 0.001 | 0.4 | MHz | Fast mode | 7 | |
| SCL operating frequency, high-speed mode | ƒ(SCL) | 0.001 | 2.56 | MHz | High-speed mode | 7 |
CAD (KiCad official)
- Symbol:
INA220BIDGST - Footprint:
Package_SO:MSOP-10_3x3mm_P0.5mm - 3D model: VSSOP-10-0.5mm (KiCad packages3D, STEP)
- 3D model files:
ina220bidgst-etched.step/ina220bidgst-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);ina220bidgst.step/ina220bidgst.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (39 pp, sha256
38926efcb5cde18a, retrieved 2026-10-31, tier: manufacturer) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).