← Commit history

ina219aidcnt: component.models_3d pose record per STEP (Z-up, seated z=0, pad-centre origin, identity binding)

Ray ·78a0b6af97 · ·parent 5ea7ab6
2 files changed +90−10
package.json+48−8
@@ -67,11 +67,11 @@         "number": "1",         "name": "IN+",         "type": "input",-        "description": "Positive differential shunt voltage input; connect to positive side of shunt resistor; range \u00b140 mV to \u00b1320 mV depending on PGA setting."+        "description": "Positive differential shunt voltage input; connect to positive side of shunt resistor; range ±40 mV to ±320 mV depending on PGA setting."       },       {         "number": "2",-        "name": "IN\u2013",+        "name": "IN–",         "type": "input",         "description": "Negative differential shunt voltage input; connect to negative side of shunt resistor; bus voltage measured from this pin to ground."       },@@ -91,25 +91,25 @@         "number": "5",         "name": "SCL",         "type": "input",-        "description": "Serial bus clock line for I\u00b2C/SMBus-compatible interface; digital input with open-drain structure."+        "description": "Serial bus clock line for I²C/SMBus-compatible interface; digital input with open-drain structure."       },       {         "number": "6",         "name": "SDA",         "type": "bidirectional",-        "description": "Serial bus data line for I\u00b2C/SMBus-compatible interface; digital I/O with open-drain structure."+        "description": "Serial bus data line for I²C/SMBus-compatible interface; digital I/O with open-drain structure."       },       {         "number": "7",         "name": "A0",         "type": "input",-        "description": "Address pin; logic level selects I\u00b2C slave address; sampled at start of each communication event."+        "description": "Address pin; logic level selects I²C slave address; sampled at start of each communication event."       },       {         "number": "8",         "name": "A1",         "type": "input",-        "description": "Address pin; logic level selects I\u00b2C slave address; sampled at start of each communication event."+        "description": "Address pin; logic level selects I²C slave address; sampled at start of each communication event."       }     ],     "provenance": {@@ -144,6 +144,46 @@     "viewers": {       "symbol": "viewers/symbol.html",       "footprint": "viewers/footprint.html"-    }+    },+    "models_3d": [+      {+        "file": "ina219aidcnt.step",+        "role": "plain",+        "up": "Z",+        "units": "mm",+        "origin": "footprint origin = pad-pattern centre",+        "seat": "z = 0",+        "extents_mm": [+          2.8,+          2.9,+          1.2+        ],+        "zmin_mm": -0.0,+        "centre_offset_mm": 0.0,+        "footprint_binding": "identity",+        "sha256": "b9dc5b435d49868df7491668d5322debfe5d699dbb41c2ad93a41518ec9b5007",+        "checked": "2026-10-07",+        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+      },+      {+        "file": "ina219aidcnt-etched.step",+        "role": "eda",+        "up": "Z",+        "units": "mm",+        "origin": "footprint origin = pad-pattern centre",+        "seat": "z = 0",+        "extents_mm": [+          2.8,+          2.9,+          1.2+        ],+        "zmin_mm": -0.0,+        "centre_offset_mm": 0.0,+        "footprint_binding": "identity",+        "sha256": "b81f2d7219f2670d3a7b74f1de46ade1d33bcdfeb9592b793f540a86594348e7",+        "checked": "2026-10-07",+        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+      }+    ]   }-}\ No newline at end of file+}
page.json+42−2
@@ -129,7 +129,47 @@     "viewers": {       "symbol": "viewers/symbol.html",       "footprint": "viewers/footprint.html"-    }+    },+    "models_3d": [+      {+        "file": "ina219aidcnt.step",+        "role": "plain",+        "up": "Z",+        "units": "mm",+        "origin": "footprint origin = pad-pattern centre",+        "seat": "z = 0",+        "extents_mm": [+          2.8,+          2.9,+          1.2+        ],+        "zmin_mm": -0.0,+        "centre_offset_mm": 0.0,+        "footprint_binding": "identity",+        "sha256": "b9dc5b435d49868df7491668d5322debfe5d699dbb41c2ad93a41518ec9b5007",+        "checked": "2026-10-07",+        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+      },+      {+        "file": "ina219aidcnt-etched.step",+        "role": "eda",+        "up": "Z",+        "units": "mm",+        "origin": "footprint origin = pad-pattern centre",+        "seat": "z = 0",+        "extents_mm": [+          2.8,+          2.9,+          1.2+        ],+        "zmin_mm": -0.0,+        "centre_offset_mm": 0.0,+        "footprint_binding": "identity",+        "sha256": "b81f2d7219f2670d3a7b74f1de46ade1d33bcdfeb9592b793f540a86594348e7",+        "checked": "2026-10-07",+        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+      }+    ]   },   "metadata": {     "specs": {@@ -176,4 +216,4 @@   "visibility": {     "public": true   }-}\ No newline at end of file+}