main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs ina219aidcnr: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
viewers ina219aidcnr: viewers · Ray
ina219aidcnr-etched.fit.json ina219aidcnr: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
ina219aidcnr-etched.glb ina219aidcnr: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
ina219aidcnr-etched.step ina219aidcnr: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
ina219aidcnr-hero.glb ina219aidcnr: hero from the plain model · Ray
ina219aidcnr-hero.overlay.json ina219aidcnr: hero from the plain model · Ray
ina219aidcnr.glb Publish 0.1.0 · Ray
ina219aidcnr.kicad_mod Publish 0.1.0 · Ray
ina219aidcnr.kicad_sym Publish 0.1.0 · Ray
ina219aidcnr.lbr Publish 0.1.0 · Ray
ina219aidcnr.step Publish 0.1.0 · Ray
package.json Publish 0.1.1 · Ray
page.json Publish 0.1.1 · Ray
README.md ina219aidcnr: one-pass backfill (citation: different_file, hero prebuilt (inputs unchanged)) · Ray

INA219AIDCNR

Texas Instruments · Current Sense Amplifiers · SOT-23-8

INA219AIDCNR from Texas Instruments, in a SOT-23-8. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 IN+ input Positive differential shunt voltage input. Connect to the positive side of the external current-sense shunt resistor. Common-mode range 0 V to 26 V, differential range ±26 V (absolute max), input bias current ~20 uA in active mode.
2 IN- input Negative differential shunt voltage input. Connect to the negative side of the shunt resistor; bus voltage is measured from this pin to ground. Input impedance ~20 kOhm
3 GND power_in Device ground reference for the analog and digital circuitry.
4 VS power_in Power supply input, 3 V to 5.5 V (absolute max 6 V). Typical supply current ~1 mA.
5 SCL input I2C/SMBus serial clock input (open-drain, requires external pull-up). Logic thresholds: VIH >= 0.7VS, VIL <= 0.3VS.
6 SDA bidirectional I2C/SMBus serial data line (open-drain, requires external pull-up). Open-drain sink capability up to 10 mA.
7 A0 input I2C slave-address select pin 0. Tie to GND, VS, SDA, or SCL to encode 4 of the 16 programmable device addresses (see Table 1).
8 A1 input I2C slave-address select pin 1. Tie to GND, VS, SDA, or SCL together with A0 to program one of 16 device addresses (see Table 1).

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package SOT-23-8
Category Amplifiers/Comparators
Pins 8

Ordering variants

Same part, different packaging or reel option.

  • INA219AIDCNR
  • INA219AIDCNT
  • INA219AIDCNRIDR

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Full-scale current sense (input) voltage range, PGA = /1 VSHUNT 0 40 mV PGA = /1 5
Full-scale current sense (input) voltage range, PGA = /2 VSHUNT 0 80 mV PGA = /2 5
Full-scale current sense (input) voltage range, PGA = /4 VSHUNT 0 160 mV PGA = /4 5
Full-scale current sense (input) voltage range, PGA = /8 VSHUNT 0 320 mV PGA = /8 5
Bus voltage (input voltage) range 0 32 V BRNG = 1 5
Bus voltage (input voltage) range 0 16 V BRNG = 0 5
Common-mode rejection CMRR 100 120 dB VIN+ = 0 to 26 V 5
Offset voltage, RTI VOS -100 10 100 μV PGA = /1 5
Offset voltage, RTI VOS -125 20 125 μV PGA = /2 5
Offset voltage, RTI VOS -150 30 150 μV PGA = /4 5
Offset voltage, RTI VOS -200 40 200 μV PGA = /8 5
Current sense gain error -40 40 m% 5
IN+ pin input leakage -0.5 0.1 0.5 μA Power-down mode 5
IN- pin input leakage -0.5 0.1 0.5 μA Power-down mode 5
Current measurement error -0.5 0.2 0.5 % 5
Current measurement error over temperature -1 1 % TA = –25°C to 85°C 5
Bus voltage measurement error -0.5 0.2 0.5 % 5
Bus voltage measurement error over temperature -1 1 % TA = –25°C to 85°C 5
Leakage input current 0.1 1 μA 0 ≤ VIN ≤ VS 5
VIH input logic level VIH 6 V 5
VIL input logic level VIL -0.3 V 5
Logic 0 output level VOL 0.15 0.4 V ISINK = 3 mA 6
High-level output leakage current 0.1 1 μA VOUT = VS 6
Operating supply range VS 3 5.5 V 6
Quiescent current IQ 0.7 1 mA 6
Quiescent current, power-down mode IQ 6 15 μA Power-down mode 6
Supply voltage VS 6 V 4
Analog inputs differential (VIN+ – VIN–) VIN+ – VIN– -26 26 V 4
Analog inputs common-mode (VIN+ + VIN–) / 2 (VIN+ + VIN–) / 2 -0.3 26 V 4
SDA SDA -0.3 6 V referenced to GND 4
Input current into any pin 5 mA 4
Open-drain digital output current 10 mA 4
Operating temperature -40 125 °C 4
Junction temperature TJ 150 °C 4
Storage temperature Tstg -65 150 °C 4
Operating free-air temperature range TA -25 85 °C 4
Junction-to-ambient thermal resistance (DCN SOT-23) RθJA 135.4 °C/W 4
Junction-to-case (top) thermal resistance (DCN SOT-23) RθJC(top) 68.1 °C/W 4
Junction-to-board thermal resistance (DCN SOT-23) RθJB 48.9 °C/W 4
Junction-to-top characterization parameter (DCN SOT-23) ψJT 9.9 °C/W 4
Junction-to-board characterization parameter (DCN SOT-23) ψJB 48.4 °C/W 4

CAD (KiCad official)

  • Symbol: INA219AIDCNR
  • Footprint: Package_TO_SOT_SMD:SOT-23-8
  • 3D model: SOT-23-8 (KiCad packages3D, STEP)
  • 3D model files: ina219aidcnr-etched.step / ina219aidcnr-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); ina219aidcnr.step / ina219aidcnr.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet, copy hosted by ti.com (38 pp, sha256 2c973858ed829073, retrieved 2026-08-17, tier: lcsc) (the maker's link now serves a different file than the copy stored here)
  • Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
  • Extractor: ds2sf (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF