3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownINA2181A1IDGSR
Texas Instruments · Current Sense Amplifiers · VSSOP-10-0.5mm
INA2181A1IDGSR from Texas Instruments, in a VSSOP-10-0.5mm. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | OUT1 | output | Channel 1 analog output voltage proportional to measured current across sense resistor. |
| 2 | IN-1 | input | Channel 1 current sense amplifier negative input; connect to load side for high-side sensing or to ground side for low-side sensing configuration. |
| 3 | IN+1 | input | Channel 1 current sense amplifier positive input; connect to bus voltage side for high-side sensing or to load side for low-side sensing configuration. |
| 4 | GND | power_in | Analog ground reference for the differential measurement circuit. |
| 5 | REF1 | input | Channel 1 reference input for setting output baseline voltage, operating range 0V to VS. |
| 6 | REF2 | input | Channel 2 reference input for setting output baseline voltage, operating range 0V to VS. |
| 7 | IN+2 | input | Channel 2 current sense amplifier positive input; connect to bus voltage side for high-side sensing or to load side for low-side sensing configuration. |
| 8 | IN-2 | input | Channel 2 current sense amplifier negative input; connect to load side for high-side sensing or to ground side for low-side sensing configuration. |
| 9 | OUT2 | output | Channel 2 analog output voltage proportional to measured current across sense resistor. |
| 10 | VS | power_in | Analog power supply input pin, operating range 2.7V to 5.5V. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | VSSOP-10-0.5mm |
| Category | Amplifiers/Comparators |
| Pins | 10 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply voltage | VS | 6 | V | 7 | |||
| Differential input voltage | (VIN+)-(VIN-) | -26 | 26 | V | Differential, VIN+ and VIN- pins | 7 | |
| Maximum output current | IOUT | 8 | mA | 7 | |||
| Operating temperature range, natural convection | TA | -55 | 150 | °C | Natural-convection ambient | 7 | |
| Junction temperature | TJ | 150 | °C | 7 | |||
| Storage temperature | Tstg | -65 | 150 | °C | 7 | ||
| Common-mode input voltage (IN+ and IN–) | VCM | -0.2 | 12 | 26 | V | Nominal value column as printed | 7 |
| Operating supply voltage | VS | 2.7 | 5 | 5.5 | V | 7 | |
| Operating temperature range, natural convection | TA | -40 | 125 | °C | Natural-convection ambient | 7 | |
| Common-mode rejection ratio, RTI | CMRR | 84 | 100 | dB | VIN+ = 0V to 26V, VSENSE = 0mV, TA = -40°C to +125°C | 8 | |
| Input offset voltage, RTI | VOS | -150 | 25 | 150 | µV | VSENSE = 0mV, VIN+ = 0V | 8 |
| Input offset voltage, RTI | VOS | -500 | 100 | 500 | µV | VSENSE = 0mV | 8 |
| Offset voltage drift, RTI | dVOS/dT | 0.2 | 1 | µV/°C | VSENSE = 0mV, TA = -40°C to +125°C | 8 | |
| Power-supply rejection ratio, RTI | PSRR | -40 | 8 | 40 | µV/V | VS = 2.7V to 5.5V, VIN+ = 12V, VSENSE = 0mV | 8 |
| Input offset current | IIO | -0.05 | 0.05 | µA | VSENSE = 0mV | 8 | |
| Gain error | EG | -1 | 0.1 | 1 | % | VOUT = 0.5V to VS – 0.5V, TA = -40°C to +125°C | 8 |
| Gain error vs temperature | 1.5 | 20 | ppm/°C | TA = -40°C to +125°C | 8 | ||
| Nonlinearity error | -0.01 | 0.01 | % | VOUT = 0.5V to VS – 0.5V | 8 | ||
| Maximum capacitive load | 1 | nF | No sustained oscillation | 8 | |||
| Quiescent current (INA2181) | IQ | 356 | 500 | µA | VSENSE = 0mV | 8 | |
| Quiescent current (INA2181), over temperature | IQ | 520 | µA | VSENSE = 0mV, TA = -40°C to +125°C | 8 | ||
| Junction-to-ambient thermal resistance (DGS, VSSOP-10) | RθJA | 177.3 | °C/W | DGS (VSSOP) 10-pin package | 7 | ||
| Junction-to-case (top) thermal resistance (DGS, VSSOP-10) | RθJC(top) | 68.7 | °C/W | DGS (VSSOP) 10-pin package | 7 | ||
| Junction-to-board thermal resistance (DGS, VSSOP-10) | RθJB | 98.4 | °C/W | DGS (VSSOP) 10-pin package | 7 | ||
| Junction-to-top characterization parameter (DGS, VSSOP-10) | ψJT | 12.6 | °C/W | DGS (VSSOP) 10-pin package | 7 | ||
| Junction-to-board characterization parameter (DGS, VSSOP-10) | ψJB | 96.9 | °C/W | DGS (VSSOP) 10-pin package | 7 |
CAD (KiCad official)
- Symbol:
INA2181A1IDGSR - Footprint:
Package_SO:MSOP-10_3x3mm_P0.5mm - 3D model: VSSOP-10-0.5mm (KiCad packages3D, STEP)
- 3D model files:
ina2181a1idgsr-etched.step/ina2181a1idgsr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);ina2181a1idgsr.step/ina2181a1idgsr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (62 pp, sha256
16077f586e92eff4, retrieved 2026-10-03, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-4-5-20251001(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).