INA2180A4QDGKRQ1

{
  "slug": "ina2180a4qdgkrq1",
  "version": "0.1.0",
  "type": "component",
  "description": "Texas Instruments Current Sense Amplifiers, VSSOP-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "tags": [
    "component",
    "amplifiers-comparators",
    "ina2180a4qdgkrq1",
    "factory-2.0.0",
    "extractor-text"
  ],
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "ina2180a4qdgkrq1.kicad_sym",
    "ina2180a4qdgkrq1.kicad_mod",
    "ina2180a4qdgkrq1.glb",
    "ina2180a4qdgkrq1.step",
    "ina2180a4qdgkrq1.lbr",
    "docs/hero.png",
    "docs/ina2180a4qdgkrq1-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "ina2180a4qdgkrq1-hero.glb",
    "ina2180a4qdgkrq1-hero.overlay.json"
  ],
  "component": {
    "mpn": "INA2180A4QDGKRQ1",
    "manufacturer": "Texas Instruments",
    "package": "VSSOP-8",
    "pin_count": 8,
    "category": "Amplifiers/Comparators",
    "subcategory": "Current Sense Amplifiers",
    "datasheet": "https://www.ti.com/cn/lit/gpn/ina180-q1",
    "parts": {
      "symbol": "ina2180a4qdgkrq1.kicad_sym",
      "footprint": "ina2180a4qdgkrq1.kicad_mod",
      "model_3d": "ina2180a4qdgkrq1-hero.glb",
      "model_3d_plain": "ina2180a4qdgkrq1.glb",
      "model_3d_step": "ina2180a4qdgkrq1-etched.step",
      "model_3d_step_plain": "ina2180a4qdgkrq1.step",
      "lbr": "ina2180a4qdgkrq1.lbr"
    },
    "distributor_links": {
      "lcsc": "C2058212",
      "digikey": "296-51161-2-ND",
      "mouser": "595-INA2180A4QDGKRQ1"
    },
    "distributor_check": {
      "checked_at": "2026-10-08T22:34:33Z",
      "source": "Component Ocean /api/assign-pns",
      "digikey": {
        "pn": "296-51161-2-ND",
        "status": "found",
        "lifecycle": "Active"
      },
      "mouser": {
        "pn": "595-INA2180A4QDGKRQ1",
        "status": "found"
      }
    },
    "pins": [
      {
        "number": "1",
        "name": "OUT1",
        "type": "output",
        "description": "Channel 1 analog output voltage; under the stated test conditions the output reaches within 30 mV of the positive supply rail and within 5 mV of GND."
      },
      {
        "number": "2",
        "name": "IN–1",
        "type": "input",
        "description": "Channel 1 current-sense amplifier negative input; connect to the load side of the sense resistor for high-side sensing and to the ground side for low-side sensing, with common-mode range -0.2 V to +26 V."
      },
      {
        "number": "3",
        "name": "IN+1",
        "type": "input",
        "description": "Channel 1 current-sense amplifier positive input; connect to the bus-voltage side of the sense resistor for high-side sensing and to the load side for low-side sensing, with common-mode range -0.2 V to +26 V."
      },
      {
        "number": "4",
        "name": "GND",
        "type": "power_in",
        "description": "Analog ground reference for both channels; the output swing to GND is referenced to this pin."
      },
      {
        "number": "5",
        "name": "IN+2",
        "type": "input",
        "description": "Channel 2 current-sense amplifier positive input; connect to the bus-voltage side of the sense resistor for high-side sensing and to the load side for low-side sensing, with common-mode range -0.2 V to +26 V."
      },
      {
        "number": "6",
        "name": "IN–2",
        "type": "input",
        "description": "Channel 2 current-sense amplifier negative input; connect to the load side of the sense resistor for high-side sensing and to the ground side for low-side sensing, with common-mode range -0.2 V to +26 V."
      },
      {
        "number": "7",
        "name": "OUT2",
        "type": "output",
        "description": "Channel 2 analog output voltage; under the stated test conditions the output reaches within 30 mV of the positive supply rail and within 5 mV of GND."
      },
      {
        "number": "8",
        "name": "VS",
        "type": "power_in",
        "description": "Power supply, 2.7 V to 5.5 V; a bypass capacitor of at least 0.1 µF should be placed close to this pin."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.3",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.3",
        "primary_model": "claude-haiku-5-5",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-5-5",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [
          "extractor flagged: The datasheet supplied is the Chinese translation of TI's INA180-Q1/INA2180-Q1/INA4180-Q1 datasheet ; Package mapping: the package option addendum (page 31) lists INA2180A4QDGKRQ1 as VSSOP (DGK), 8 pins; Inconsistency in the thermal table: Section 7.5 (page 6) labels the 10-pin VSSOP as DGS, while Secti"
        ],
        "pages_sent": 23,
        "cost_usd": 0.1175,
        "at": "2026-10-08T22:34:04"
      },
      "datasheet": {
        "url": "https://www.ti.com/cn/lit/gpn/ina180-q1",
        "pages": 47,
        "sha256": "431fca93635b3bc9",
        "source_tier": "lcsc"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 8,
        "described": 8,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "ina2180a4qdgkrq1.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          3.1,
          2.0,
          0.85
        ],
        "zmin_mm": -0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "353552981eef35cb93635057d4aeb89aef22648c77af6fd095e328bfe6b834bd",
        "checked": "2026-10-08",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "ina2180a4qdgkrq1-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          3.1,
          2.0,
          0.85
        ],
        "zmin_mm": -0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "bf12febd1b4101d1564b3d92eceab860029fa475983c5180e3591a803313b76d",
        "checked": "2026-10-08",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  }
}