INA2180A2QDGKRQ1

{
  "slug": "ina2180a2qdgkrq1",
  "version": "0.1.0",
  "type": "component",
  "description": "Texas Instruments Current-Sensing Amplifiers, VSSOP-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "tags": [
    "component",
    "operational amplifier-comparator",
    "ina2180a2qdgkrq1",
    "factory-2.0.0",
    "extractor-text"
  ],
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "ina2180a2qdgkrq1.kicad_sym",
    "ina2180a2qdgkrq1.kicad_mod",
    "ina2180a2qdgkrq1.glb",
    "ina2180a2qdgkrq1.step",
    "ina2180a2qdgkrq1.lbr",
    "docs/hero.png",
    "docs/ina2180a2qdgkrq1-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "ina2180a2qdgkrq1-hero.glb",
    "ina2180a2qdgkrq1-hero.overlay.json",
    "ina2180a2qdgkrq1-etched.glb"
  ],
  "component": {
    "mpn": "INA2180A2QDGKRQ1",
    "manufacturer": "Texas Instruments",
    "package": "VSSOP-8",
    "pin_count": 8,
    "category": "Operational Amplifier/Comparator",
    "subcategory": "Current-Sensing Amplifiers",
    "datasheet": "https://www.ti.com/lit/ds/symlink/ina2180a2qdgkrq1.pdf",
    "parts": {
      "symbol": "ina2180a2qdgkrq1.kicad_sym",
      "footprint": "ina2180a2qdgkrq1.kicad_mod",
      "model_3d": "ina2180a2qdgkrq1-hero.glb",
      "model_3d_plain": "ina2180a2qdgkrq1-etched.glb",
      "model_3d_step": "ina2180a2qdgkrq1-etched.step",
      "model_3d_step_plain": "ina2180a2qdgkrq1.step",
      "lbr": "ina2180a2qdgkrq1.lbr"
    },
    "distributor_links": {
      "lcsc": "C2057978",
      "digikey": "296-INA2180A2QDGKRQ1TR-ND",
      "mouser": "595-INA2180A2QDGKRQ1"
    },
    "distributor_check": {
      "checked_at": "2026-11-06T01:32:57Z",
      "source": "Component Ocean /api/assign-pns",
      "digikey": {
        "pn": "296-INA2180A2QDGKRQ1TR-ND",
        "status": "found",
        "lifecycle": "Active"
      },
      "mouser": {
        "pn": "595-INA2180A2QDGKRQ1",
        "status": "found"
      }
    },
    "pins": [
      {
        "number": "1",
        "name": "OUT1",
        "type": "output",
        "description": "Channel 1 analog output voltage, which swings to within a specified maximum of 30 mV of VS and 5 mV of GND."
      },
      {
        "number": "2",
        "name": "IN–1",
        "type": "input",
        "description": "Channel 1 current-sense amplifier negative input; connect to the load side of the sense resistor for high-side sensing or to the ground side for low-side sensing, with common-mode range of -0.2 V to +26 V."
      },
      {
        "number": "3",
        "name": "IN+1",
        "type": "input",
        "description": "Channel 1 current-sense amplifier positive input; connect to the bus-voltage side of the sense resistor for high-side sensing or to the load side for low-side sensing, with common-mode range of -0.2 V to +26 V."
      },
      {
        "number": "4",
        "name": "GND",
        "type": "power_in",
        "description": "Analog ground for the device."
      },
      {
        "number": "5",
        "name": "IN+2",
        "type": "input",
        "description": "Channel 2 current-sense amplifier positive input; connect to the bus-voltage side of the sense resistor for high-side sensing or to the load side for low-side sensing, with common-mode range of -0.2 V to +26 V."
      },
      {
        "number": "6",
        "name": "IN–2",
        "type": "input",
        "description": "Channel 2 current-sense amplifier negative input; connect to the load side of the sense resistor for high-side sensing or to the ground side for low-side sensing, with common-mode range of -0.2 V to +26 V."
      },
      {
        "number": "7",
        "name": "OUT2",
        "type": "output",
        "description": "Channel 2 analog output voltage, which swings to within a specified maximum of 30 mV of VS and 5 mV of GND."
      },
      {
        "number": "8",
        "name": "VS",
        "type": "power_in",
        "description": "Power supply pin; operating supply range is 2.7 V to 5.5 V."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.3",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.3",
        "primary_model": "claude-haiku-5-5",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-5-5",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [
          "extractor flagged: Pinout taken from Figure 6-3 and Table 6-2 (DGK 8-pin VSSOP, INA2180-Q1 dual-channel) on page 4 of t; Output swing limits in the pin descriptions (30 mV to VS, 5 mV to GND) are the maximum specified swi"
        ],
        "pages_sent": 23,
        "cost_usd": 0.1087,
        "at": "2026-11-06T01:32:40"
      },
      "datasheet": {
        "url": "https://www.ti.com/lit/ds/symlink/ina2180a2qdgkrq1.pdf",
        "pages": 42,
        "sha256": "f2637d50a3661802",
        "source_tier": "mfr"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 8,
        "described": 8,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "ina2180a2qdgkrq1.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          4.9,
          3.0,
          1.35
        ],
        "zmin_mm": -0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "0af17c38f7022ea10ff245f82773c9b00d4163a407490c6b2d91869a0861df56",
        "checked": "2026-11-06",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "ina2180a2qdgkrq1-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          4.9,
          3.0,
          1.35
        ],
        "zmin_mm": -0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "b7544bb669c653ef5143ea6595aac40c3f61341801616eec729c6e5116e6d21b",
        "checked": "2026-11-06",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ],
    "package_dims": {
      "package_code": "DGK",
      "E1": {
        "nom_mm": 3.0,
        "range_mm": null
      },
      "E": {
        "nom_mm": 4.9,
        "range_mm": null
      },
      "e": {
        "nom_mm": 0.65,
        "range_mm": null
      },
      "source": "TI package designator DGK (no drawing in the datasheet)",
      "model_check": {
        "file": "ina2180a2qdgkrq1.step",
        "verdict": "SKIP",
        "reasons": [
          "the datasheet dimensions give no height or body size to compare"
        ],
        "by": "factory/package_fit.py"
      }
    }
  }
}