main
Ray ina2180a1qdgkrq1: specified limits as data (metadata.characteristics, 22 rows from the datasheet) ce0da88

INA2180A1QDGKRQ1

Texas Instruments · Current Sense Amplifiers · VSSOP-8

INA2180A1QDGKRQ1 from Texas Instruments, in a VSSOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 OUT1 output Channel 1 analog voltage output; rail-to-rail swing specified as GND+0.5mV (typ) to VS-20mV (typ) into 10kΩ to GND.
2 IN-1 input Channel 1 current-sense amplifier negative input; common-mode range -0.2V to +26V; for high-side sensing connect to load side of RSENSE, for low-side sensing connect to ground side of RSENSE.
3 IN+1 input Channel 1 current-sense amplifier positive input; common-mode range -0.2V to +26V; for high-side sensing connect to bus-voltage side of RSENSE, for low-side sensing connect to load side of RSENSE.
4 GND power_in Analog ground reference; bypass capacitor (0.1µF minimum) should be placed close to VS and GND pins.
5 IN+2 input Channel 2 current-sense amplifier positive input; common-mode range -0.2V to +26V; for high-side sensing connect to bus-voltage side of RSENSE, for low-side sensing connect to load side of RSENSE.
6 IN-2 input Channel 2 current-sense amplifier negative input; common-mode range -0.2V to +26V; for high-side sensing connect to load side of RSENSE, for low-side sensing connect to ground side of RSENSE.
7 OUT2 output Channel 2 analog voltage output; rail-to-rail swing specified as GND+0.5mV (typ) to VS-20mV (typ) into 10kΩ to GND.
8 VS power_in Analog power supply, operating range 2.7V to 5.5V; maximum quiescent current 500µA (INA2180-Q1) at VS = 5V; decouple with at least 0.1µF to GND.

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package VSSOP-8
Category Amplifiers/Comparators
Pins 8

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Common-mode rejection ratio, RTI CMRR 84 100 dB VIN+ = 0V to 26V, VSENSE = 10mV, TA = -40°C to +125°C 7
Input offset voltage, RTI VOS -500 100 500 μV 7
Input offset voltage, RTI VOS -150 25 150 μV VIN+ = 0V 7
Input offset voltage drift, RTI dVOS/dT 0.2 1 μV/°C TA = -40°C to +125°C 7
Power-supply rejection ratio, RTI PSRR -40 8 40 μV/V VS = 2.7 V to 5.5 V, VSENSE = 10 mV 7
Input offset current IIO -0.05 0.05 µA VSENSE = 0mV 7
Gain error EG -1 0.1 1 % VOUT = 0.5V to VS –0.5V, TA = -40°C to +125°C 7
Gain error vs temperature 1.5 20 ppm/°C TA = -40°C to +125°C 7
Nonlinearity error -0.01 0.01 % VOUT = 0.5V to VS – 0.5V 7
Output swing to positive supply rail (printed as VS minus value) VSP 0.02 0.03 V RL = 10kΩ to GND, TA = -40°C to +125°C 7
Output swing to GND (printed as GND plus value) VSN 0.0005 0.005 V RL = 10kΩ to GND, TA = -40°C to +125°C 7
Maximum capacitive load 1 nF No sustained oscillation 7
Quiescent current (INA2180-Q1) IQ 355 500 µA VSENSE = 10 mV 7
Quiescent current (INA2180-Q1) IQ 520 µA VSENSE = 10mV, TA = -40°C to +125°C 7
Supply voltage range VS 2.7 5.5 V Normal operation 18
Common-mode input voltage range VCM -0.2 26 V Normal operation 17
Input bias current IIB 0.1 µA VSENSE = 0mV, VIN+ = 0V 7
Input bias current IIB 80 µA VSENSE = 0mV 7
Gain (A1 device) G 20 V/V A1 device 7
Small-signal bandwidth (A1 device) BW 350 kHz A1 device, CLOAD = 10pF 7
Slew rate SR 2 V/µs 7
Voltage noise density, RTI 40 nV/√Hz 7

CAD (KiCad official)

  • Symbol: INA2180A1QDGKRQ1
  • Footprint: Package_SO:VSSOP-8_2.3x2mm_P0.5mm
  • 3D model: VSSOP-8 (KiCad packages3D, STEP)
  • 3D model files: ina2180a1qdgkrq1-etched.step / ina2180a1qdgkrq1-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); ina2180a1qdgkrq1.step / ina2180a1qdgkrq1.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (47 pp, sha256 431fca93635b3bc9, retrieved 2026-09-27, tier: lcsc)
  • Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
  • Extractor: parts-factory 2.0.0 / extract_pins 0.2, primary claude-haiku-4-5-20251001 (text), consensus claude-sonnet-4-6 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF