component
INA2180A1IDGKR
Public Made by Adomby adom
Texas Instruments Current-Sensing Amplifiers, VSSOP-8. Datasheet-verified pinout, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads on click. Unloads only if this page sits in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads on click. Unloads only if this page sits in the background.
PCB Footprint
Open full view ↗Loads on click. Unloads only if this page sits in the background.
Datasheet
Open in new tab ↗Loads on click. Unloads only if this page sits in the background.
README
markdownINA2180A1IDGKR
Texas Instruments · Current-Sensing Amplifiers · VSSOP-8
INA2180A1IDGKR from Texas Instruments, in a VSSOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | OUT1 | output | Channel 1 analog output voltage. Delivers the amplified sense-resistor voltage (gain = 20 V/V) referenced to GND, with a 2 V/µs slew rate. Drive an ADC or comparator input. |
| 2 | IN-1 | input | Channel 1 current-sense amplifier negative input. Connect to the load side of the sense resistor for high-side sensing, or the ground side for low-side sensing. Common-mode range -0.2 V to +26 V. |
| 3 | IN+1 | input | Channel 1 current-sense amplifier positive input. Connect to the bus/supply side of the sense resistor for high-side sensing, or the load side for low-side sensing. Common-mode range -0.2 V to +26 V. |
| 4 | GND | power_in | Analog ground reference for both channels. Connect to the system analog ground plane. |
| 5 | IN+2 | input | Channel 2 current-sense amplifier positive input. Connect to the bus/supply side of the sense resistor for high-side sensing, or the load side for low-side sensing. Common-mode range -0.2 V to +26 V. |
| 6 | IN-2 | input | Channel 2 current-sense amplifier negative input. Connect to the load side of the sense resistor for high-side sensing, or the ground side for low-side sensing. Common-mode range -0.2 V to +26 V. |
| 7 | OUT2 | output | Channel 2 analog output voltage. Delivers the amplified sense-resistor voltage (gain = 20 V/V) referenced to GND, with a 2 V/µs slew rate. Drive an ADC or comparator input. |
| 8 | VS | power_in | Positive power supply, 2.7 V to 5.5 V. Bypass to GND with a 0.1 µF ceramic capacitor placed close to the pin. Maximum quiescent current 500 µA (dual channel). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | VSSOP-8 |
| Category | Op-amp/Cmp |
| Pins | 8 |
Ordering variants
Same part, different packaging or reel option.
INA2180A1IDGKRINA2180A1IDGKTINA2180A1IDGKRIDSGRINA2180A1IDGKRIDSGT
CAD (KiCad official)
- Symbol:
INA2180A1IDGKR - Footprint:
Package_SO:VSSOP-8_2.3x2mm_P0.5mm - 3D model: VSSOP-8 (KiCad packages3D, STEP)
- 3D model files:
ina2180a1idgkr-etched.step/ina2180a1idgkr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);ina2180a1idgkr.step/ina2180a1idgkr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (50 pp, sha256
271a5242291d4eca, retrieved 2026-08-17, tier: manufacturer) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor:
ds2sf(Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate. - CAD: KiCad official libraries (CC-BY-SA 4.0).