3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownINA214BQDCKRQ1
Texas Instruments · Current Sense Amplifiers · SOT-363-6
INA214BQDCKRQ1 from Texas Instruments, in a SOT-363-6. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | REF | input | Reference voltage input that sets the zero-input output level; it may be set anywhere between 0 V and V+. |
| 2 | GND | power_in | Ground reference for the device. |
| 3 | V+ | power_in | Power supply input, specified for 2.7 V to 26 V (absolute maximum 28 V). |
| 4 | IN+ | input | Connect to the supply side of the shunt resistor; common-mode range is -0.1 V to 26 V for version B devices. |
| 5 | IN- | input | Connect to the load side of the shunt resistor; common-mode range is -0.1 V to 26 V for version B devices. |
| 6 | OUT | output | Voltage output, which swings to within 0.2 V of V+ and 0.05 V above GND at a 10 kΩ load over -40°C to 125°C. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | SOT-363-6 |
| Category | Amplifiers/Comparators |
| Pins | 6 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Common-mode input voltage, Versions B and C | VCM | -0.1 | 26 | V | TA = -40°C to 125°C | 5 | |
| Common-mode rejection ratio (INA214-Q1) | CMRR | 105 | 140 | dB | VIN+ = 0 V to 26 V, VSENSE = 0 mV, TA = -40°C to 125°C | 5 | |
| Offset voltage, RTI (INA214-Q1) | VOS | -60 | 1 | 60 | µV | VSENSE = 0 mV, TA = 25°C | 5 |
| Offset voltage vs power supply | PSR | -10 | 0.1 | 10 | µV/V | VS = 2.7 V to 18 V, VIN+ = 18 V, VSENSE = 0 mV, TA = 25°C | 5 |
| Input bias current | IB | 15 | 28 | 35 | µA | VSENSE = 0 mV, TA = 25°C | 5 |
| Offset voltage vs temperature | dVOS/dT | 0.1 | 0.5 | µV/°C | TA = -40°C to 125°C | 5 | |
| Gain error (Versions A and B) | -1 | 0.02 | 1 | % | VSENSE = -5 mV to 5 mV, TA = -40°C to 125°C | 6 | |
| Gain error vs temperature | 3 | 10 | ppm/°C | TA = -40°C to 125°C | 6 | ||
| Maximum capacitive load | 1 | nF | No sustained oscillation, TA = 25°C | 6 | |||
| Quiescent current | IQ | 65 | 100 | µA | VSENSE = 0 mV, TA = 25°C | 6 | |
| Quiescent current | IQ | 115 | µA | VSENSE = 0 mV, TA = -40°C to 125°C | 6 | ||
| Supply voltage (V+ pin) | VS | 28 | V | 4 | |||
| Analog inputs, differential | VDIF | -28 | 28 | V | VDIF = (VIN+), (VIN-) | 4 | |
| Analog input common-mode, Versions B and C (upper limit) | VIN | 28 | V | Common-mode (Versions B and C) | 4 | ||
| Input current into any pin | IIN | 5 | mA | 4 | |||
| Operating temperature | TA | -40 | 125 | °C | Operating free-air temperature range | 4 | |
| Junction temperature | TJ | 150 | °C | 4 | |||
| Storage temperature | Tstg | -65 | 150 | °C | 4 | ||
| ESD, human body model (Versions B and C) | HBM | -3500 | 3500 | V | Per AEC Q100-002, HBM ESD classification level 2 | 4 | |
| ESD, charged device model (Versions B and C) | CDM | -1000 | 1000 | V | Per AEC Q100-011, CDM ESD classification level C6 | 4 | |
| Supply voltage | VS | 2.7 | 26 | V | 4 | ||
| Junction temperature | TJ | -40 | 125 | °C | 4 | ||
| Junction-to-ambient thermal resistance (DCK, 6 pins) | RθJA | 227.3 | °C/W | DCK (SC70) package, 6 pins | 5 | ||
| Junction-to-case (top) thermal resistance (DCK, 6 pins) | RθJC(top) | 79.5 | °C/W | DCK (SC70) package, 6 pins | 5 | ||
| Junction-to-board thermal resistance (DCK, 6 pins) | RθJB | 72.1 | °C/W | DCK (SC70) package, 6 pins | 5 |
CAD (KiCad official)
- Symbol:
INA214BQDCKRQ1 - Footprint:
Package_TO_SOT_SMD:SOT-363_SC-70-6 - 3D model: SOT-363-6 (KiCad packages3D, STEP)
- 3D model files:
ina214bqdckrq1-etched.step/ina214bqdckrq1-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);ina214bqdckrq1.step/ina214bqdckrq1.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (38 pp, sha256
7a91ea16f9c4f3cd, retrieved 2026-11-11, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).