Generated by kicad-footprint-generator · KiCad file format 20260206
INA214AIRSWR
Texas Instruments · Current Sense Amplifiers · UQFN-10(1.4x1.8)
INA214AIRSWR from Texas Instruments, in a UQFN-10(1.4x1.8). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | NC | unconnected | No internal connection; may be left floating or connected to any voltage between V- and V+. |
| 2 | IN+ | input | Analog input connected to the power supply side of the shunt resistor; connect together with pin 3. |
| 3 | IN+ | input | Analog input connected to the power supply side of the shunt resistor; connect together with pin 2. |
| 4 | IN- | input | Analog input connected to the load side of the shunt resistor; connect together with pin 5. |
| 5 | IN- | input | Analog input connected to the load side of the shunt resistor; connect together with pin 4. |
| 6 | V+ | power_in | Positive power supply input, 2.7V to 26V. |
| 7 | NC | unconnected | No internal connection; may be left floating or connected to any voltage between V- and V+. |
| 8 | REF | input | Reference voltage input, range 0V to V+. |
| 9 | GND | power_in | Ground reference. |
| 10 | OUT | output | Analog output voltage. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | UQFN-10(1.4x1.8) |
| Category | Amplifiers/Comparators |
| Pins | 10 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Common-mode input range (version A, per MPN 'A' suffix) | VCM | -0.3 | 26 | V | TA = -40°C to +125°C | 7 | |
| Common-mode rejection ratio (INA214) | CMRR | 105 | 140 | dB | VIN+ = 0V to 26V, VSENSE = 0mV, TA = -40°C to +125°C | 7 | |
| Input offset voltage, RTI (INA214, max ±60 µV) | VO | -60 | 1 | 60 | µV | VSENSE = 0mV | 7 |
| Input offset voltage drift vs temperature, RTI | dVOS/dT | 0.1 | 0.5 | µV/°C | VSENSE = 0mV, TA = -40°C to +125°C | 7 | |
| Power supply rejection ratio, RTI | PSRR | -10 | 0.1 | 10 | µV/V | VS = 2.7V to 18V, VIN+ = 18V, VSENSE = 0mV | 7 |
| Input bias current | IIB | 15 | 28 | 35 | µA | VSENSE = 0mV | 7 |
| Input offset current | IIO | -0.02 | 0.02 | µA | VSENSE = 0mV | 7 | |
| Gain error (version A) | EG | -1 | 0.02 | 1 | % | VSENSE = -5mV to 5mV, TA = -40°C to +125°C, versions A and B | 7 |
| Gain error drift vs temperature | 3 | 10 | ppm/°C | TA = -40°C to +125°C | 7 | ||
| Nonlinearity error | -0.01 | 0.01 | % | VSENSE = -5mV to 5mV | 7 | ||
| Maximum capacitive load | 1 | nF | No sustained oscillation | 7 | |||
| Output voltage swing to V+ rail | -0.2 | -0.05 | V | Relative to V+; RL = 10kΩ to GND, TA = -40°C to +125°C | 7 | ||
| Output voltage swing to GND | 0.005 | 0.05 | V | Relative to GND; RL = 10kΩ to GND, TA = -40°C to +125°C | 7 | ||
| Supply voltage range | VS | 2.7 | 26 | V | TA = -40°C to +125°C | 8 | |
| Quiescent current | IQ | 65 | 100 | µA | VSENSE = 0mV | 8 | |
| Quiescent current over temperature | IQ | 115 | µA | TA = -40°C to +125°C | 8 | ||
| Specified temperature range | -40 | 125 | °C | 8 | |||
| Operating temperature range | -55 | 150 | °C | 8 | |||
| Thermal resistance, junction-to-ambient (UQFN, electrical table) | θJA | 80 | °C/W | Thin UQFN package | 8 | ||
| Thermal resistance, junction-to-ambient (RSW 10-pin UQFN) | RθJA | 107.3 | °C/W | RSW (UQFN) 10-pin package | 6 | ||
| Thermal resistance, junction-to-case (top) | RθJC(top) | 56.5 | °C/W | RSW (UQFN) 10-pin package | 6 | ||
| Thermal resistance, junction-to-board | RθJB | 18.7 | °C/W | RSW (UQFN) 10-pin package | 6 | ||
| Junction-to-top characterization parameter | ψJT | 1.1 | °C/W | RSW (UQFN) 10-pin package | 6 | ||
| Junction-to-board characterization parameter | ψJB | 18.7 | °C/W | RSW (UQFN) 10-pin package | 6 |
CAD (KiCad official)
- Symbol:
INA214AIRSWR - Footprint:
Package_DFN_QFN:UQFN-10_1.4x1.8mm_P0.4mm - 3D model: UQFN-10(1.4x1.8) (KiCad packages3D, STEP)
- 3D model files:
ina214airswr-etched.step/ina214airswr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);ina214airswr.step/ina214airswr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (50 pp, sha256
8bce21ab869b5599, retrieved 2026-10-03, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-4-5-20251001(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).