# INA213CIRSWR

**Texas Instruments** · Current Sense Amplifiers · UQFN-10(1.4x1.8)

INA213CIRSWR from Texas Instruments, in a UQFN-10(1.4x1.8). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

## Pinout

| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | NC | unconnected | No internal connection; the pin table says it may be left floating or grounded, while the figure 4-2 note says it may be left floating or connected to any voltage between V- and V+. |
| 2 | IN+ | input | Analog input connected to the supply side of the shunt resistor; on the RSW package both IN+ pins (2 and 3) must be connected together. |
| 3 | IN+ | input | Analog input connected to the supply side of the shunt resistor; tie to pin 2 (both IN+ pins must be connected together on the RSW package). |
| 4 | IN- | input | Analog input connected to the load side of the shunt resistor; on the RSW package both IN- pins (4 and 5) must be connected together. |
| 5 | IN- | input | Analog input connected to the load side of the shunt resistor; tie to pin 4 (both IN- pins must be connected together on the RSW package). |
| 6 | V+ | power_in | Analog power supply, 2.7 V to 26 V. |
| 7 | NC | unconnected | No internal connection; the pin table says it may be left floating or grounded, while the figure 4-2 note says it may be left floating or connected to any voltage between V- and V+. |
| 8 | REF | input | Analog reference voltage input, which may be set from 0 V to V+. |
| 9 | GND | power_in | Analog ground. |
| 10 | OUT | output | Analog output voltage of the current-sense amplifier. |

## Key specifications

| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | UQFN-10(1.4x1.8) |
| Category | Amplifiers/Comparators |
| Pins | 10 |

## CAD (KiCad official)

- Symbol: `INA213CIRSWR`
- Footprint: `Package_DFN_QFN:UQFN-10_1.4x1.8mm_P0.4mm`
- 3D model: UQFN-10(1.4x1.8) (KiCad packages3D, STEP)
- 3D model files: `ina213cirswr-etched.step` / `ina213cirswr-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `ina213cirswr.step` / `ina213cirswr.glb` are the bare package body.

## Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/cn/lit/gpn/ina214) (50 pp, sha256 `8bce21ab869b5599`, retrieved 2026-10-11, tier: lcsc)
- **Datasheet language:** Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).

[Datasheet PDF](docs/ina213cirswr-datasheet.pdf)