main
Ray
ina2132ua: laser-etched CAD + chip hero (factory 2.0.0 backfill)
e4cce9e
INA2132UA
Texas Instruments · Differential Amplifiers · SOIC-14
INA2132UA from Texas Instruments, in a SOIC-14. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | NC | unconnected | No internal connection. Leave floating or tie to a convenient potential. |
| 2 | -In A | input | Inverting differential input of channel A. Connects through an internal 40kΩ laser-trimmed resistor to the op-amp summing junction. Common-mode range extends to the negative supply. |
| 3 | +In A | input | Non-inverting differential input of channel A. Connects through an internal 40kΩ laser-trimmed resistor to the op-amp non-inverting node. |
| 4 | V- | power_in | Negative power supply. Connect to ground for single-supply operation or to the negative rail (down to -18V) for dual-supply operation. Total supply (V+ to V-) must not exceed 36V. |
| 5 | +In B | input | Non-inverting differential input of channel B. Connects through an internal 40kΩ laser-trimmed resistor to the op-amp non-inverting node. |
| 6 | -In B | input | Inverting differential input of channel B. Connects through an internal 40kΩ laser-trimmed resistor to the op-amp summing junction. |
| 7 | NC | unconnected | No internal connection. Leave floating or tie to a convenient potential. |
| 8 | Ref B | input | Reference pin for channel B. Sets the output reference level; typically tied to ground for dual-supply or to mid-supply (Vs/2) for single-supply operation. Connected via internal 40kΩ resistor to the feedback network. |
| 9 | Out B | output | Difference amplifier output for channel B. Unity-gain output of (+In B - -In B) + Ref B. Short-circuit current typically ±12mA; stable driving up to 10nF. |
| 10 | Sense B | input | Sense (feedback) pin for channel B. Typically tied directly to Out B for unity gain; can be used for remote-sense connections or to configure alternate gains with external resistors. |
| 11 | V+ | power_in | Positive power supply. Single supply 2.7V to 36V, or dual supply +1.35V to +18V. Bypass locally with a 0.1µF ceramic capacitor to V-. |
| 12 | Sense A | input | Sense (feedback) pin for channel A. Typically tied directly to Out A for unity gain; can be used for remote-sense connections or to configure alternate gains with external resistors. |
| 13 | Out A | output | Difference amplifier output for channel A. Unity-gain output of (+In A - -In A) + Ref A. Short-circuit current typically ±12mA; stable driving up to 10nF. |
| 14 | Ref A | input | Reference pin for channel A. Sets the output reference level; typically tied to ground for dual-supply or to mid-supply (Vs/2) for single-supply operation. Connected via internal 40kΩ resistor to the feedback network. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | SOIC-14 |
| Category | Amplifiers/Comparators |
| Pins | 14 |
Ordering variants
Same part, different packaging or reel option.
INA2132UAINA2132UA/2K5INA2132U/2K5
CAD (KiCad official)
- Symbol:
INA2132UA - Footprint:
Package_SO:SOIC-14_3.9x8.7mm_P1.27mm - 3D model: SOIC-14 (KiCad packages3D, STEP)
- 3D model files:
ina2132ua-etched.step/ina2132ua-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);ina2132ua.step/ina2132ua.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (19 pp, sha256
4077100c4925de9e, retrieved 2026-08-17, tier: lcsc) - Extractor:
ds2sf(Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# INA2132UA
**Texas Instruments** · Differential Amplifiers · SOIC-14
INA2132UA from Texas Instruments, in a SOIC-14. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | NC | unconnected | No internal connection. Leave floating or tie to a convenient potential. |
| 2 | -In A | input | Inverting differential input of channel A. Connects through an internal 40kΩ laser-trimmed resistor to the op-amp summing junction. Common-mode range extends to the negative supply. |
| 3 | +In A | input | Non-inverting differential input of channel A. Connects through an internal 40kΩ laser-trimmed resistor to the op-amp non-inverting node. |
| 4 | V- | power_in | Negative power supply. Connect to ground for single-supply operation or to the negative rail (down to -18V) for dual-supply operation. Total supply (V+ to V-) must not exceed 36V. |
| 5 | +In B | input | Non-inverting differential input of channel B. Connects through an internal 40kΩ laser-trimmed resistor to the op-amp non-inverting node. |
| 6 | -In B | input | Inverting differential input of channel B. Connects through an internal 40kΩ laser-trimmed resistor to the op-amp summing junction. |
| 7 | NC | unconnected | No internal connection. Leave floating or tie to a convenient potential. |
| 8 | Ref B | input | Reference pin for channel B. Sets the output reference level; typically tied to ground for dual-supply or to mid-supply (Vs/2) for single-supply operation. Connected via internal 40kΩ resistor to the feedback network. |
| 9 | Out B | output | Difference amplifier output for channel B. Unity-gain output of (+In B - -In B) + Ref B. Short-circuit current typically ±12mA; stable driving up to 10nF. |
| 10 | Sense B | input | Sense (feedback) pin for channel B. Typically tied directly to Out B for unity gain; can be used for remote-sense connections or to configure alternate gains with external resistors. |
| 11 | V+ | power_in | Positive power supply. Single supply 2.7V to 36V, or dual supply +1.35V to +18V. Bypass locally with a 0.1µF ceramic capacitor to V-. |
| 12 | Sense A | input | Sense (feedback) pin for channel A. Typically tied directly to Out A for unity gain; can be used for remote-sense connections or to configure alternate gains with external resistors. |
| 13 | Out A | output | Difference amplifier output for channel A. Unity-gain output of (+In A - -In A) + Ref A. Short-circuit current typically ±12mA; stable driving up to 10nF. |
| 14 | Ref A | input | Reference pin for channel A. Sets the output reference level; typically tied to ground for dual-supply or to mid-supply (Vs/2) for single-supply operation. Connected via internal 40kΩ resistor to the feedback network. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | SOIC-14 |
| Category | Amplifiers/Comparators |
| Pins | 14 |
## Ordering variants
Same part, different packaging or reel option.
- `INA2132UA`
- `INA2132UA/2K5`
- `INA2132U/2K5`
## CAD (KiCad official)
- Symbol: `INA2132UA`
- Footprint: `Package_SO:SOIC-14_3.9x8.7mm_P1.27mm`
- 3D model: SOIC-14 (KiCad packages3D, STEP)
- 3D model files: `ina2132ua-etched.step` / `ina2132ua-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `ina2132ua.step` / `ina2132ua.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/cn/lit/gpn/ina2132) (19 pp, sha256 `4077100c4925de9e`, retrieved 2026-08-17, tier: lcsc)
- **Extractor:** `ds2sf` (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/ina2132ua-datasheet.pdf)