3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownINA212BIDCKR
Texas Instruments · Current Sense Amplifiers · SC-70-6
INA212BIDCKR from Texas Instruments, in a SC-70-6. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | REF | input | Reference voltage input that sets the output DC offset; input voltage 0V to V+. |
| 2 | GND | power_in | Analog ground reference. |
| 3 | V+ | power_in | Positive power supply; operating voltage 2.7V to 26V. |
| 4 | IN+ | input | Non-inverting differential input to shunt resistor high side; common mode voltage -0.1V to 26V (version B). |
| 5 | IN- | input | Inverting differential input to shunt resistor low side; differential voltage range ±26V. |
| 6 | OUT | output | Analog output with 1000V/V gain from shunt voltage measurement. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | SC-70-6 |
| Category | Amplifiers/Comparators |
| Pins | 6 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Common-mode input voltage range (version B) | VCM | -0.1 | 26 | V | Version B and C; TA = -40°C to +125°C | 7 | |
| Operating supply voltage range | VS | 2.7 | 26 | V | TA = -40°C to +125°C | 8 | |
| Quiescent current | IQ | 65 | 100 | µA | VSENSE = 0mV | 8 | |
| Quiescent current over temperature range | IQ | 115 | µA | TA = -40°C to +125°C | 8 | ||
| Gain error (version B) | EG | -1 | 0.02 | 1 | % | VSENSE = -5mV to 5mV, TA = -40°C to +125°C (version A and B) | 7 |
| Gain error drift | 3 | 10 | ppm/°C | TA = -40°C to +125°C | 7 | ||
| Common-mode rejection ratio (INA212) | CMRR | 105 | 140 | dB | VIN+ = 0V to 26V, VSENSE = 0mV; TA = -40°C to +125°C | 7 | |
| Input offset voltage, RTI (INA212) | VO | -35 | 0.55 | 35 | µV | VSENSE = 0mV | 7 |
| Offset voltage drift vs temperature, RTI | dVOS/dT | 0.1 | 0.5 | µV/°C | VSENSE = 0mV, TA = -40°C to +125°C | 7 | |
| Power supply rejection ratio, RTI | PSRR | -10 | 0.1 | 10 | µV/V | VS = 2.7V to 18V, VIN+ = 18V, VSENSE = 0mV | 7 |
| Input bias current | IIB | 15 | 28 | 35 | µA | VSENSE = 0mV | 7 |
| Nonlinearity error | -0.01 | 0.01 | % | VSENSE = -5mV to 5mV | 7 | ||
| Maximum capacitive load | 1 | nF | No sustained oscillation | 7 | |||
| Specified temperature range | -40 | 125 | °C | 8 | |||
| Operating temperature range | -55 | 150 | °C | 8 | |||
| Junction-to-ambient thermal resistance (DCK, SC70-6) | RθJA | 227.3 | °C/W | 6 | |||
| Junction-to-case (top) thermal resistance (DCK, SC70-6) | RθJC(top) | 79.5 | °C/W | 6 | |||
| Junction-to-board thermal resistance (DCK, SC70-6) | RθJB | 72.1 | °C/W | 6 | |||
| Junction-to-ambient thermal resistance, SC70 (electrical table) | θJA | 250 | °C/W | 8 |
CAD (KiCad official)
- Symbol:
INA212BIDCKR - Footprint:
Package_TO_SOT_SMD:SOT-363_SC-70-6 - 3D model: SC-70-6 (KiCad packages3D, STEP)
- 3D model files:
ina212bidckr-etched.step/ina212bidckr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);ina212bidckr.step/ina212bidckr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (50 pp, sha256
8bce21ab869b5599, retrieved 2026-09-27, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.2, primaryclaude-haiku-4-5-20251001(text), consensusclaude-sonnet-4-6(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).