INA2126UA

{
  "slug": "ina2126ua",
  "version": "0.1.0",
  "type": "component",
  "description": "Texas Instruments Instrumentation Amplifiers, SOIC-16. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "tags": [
    "component",
    "amplifiers-comparators",
    "ina2126ua",
    "factory-2.0.0",
    "extractor-text"
  ],
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "ina2126ua.kicad_sym",
    "ina2126ua.kicad_mod",
    "ina2126ua.glb",
    "ina2126ua.step",
    "ina2126ua.lbr",
    "docs/hero.png",
    "docs/ina2126ua-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "ina2126ua-hero.glb",
    "ina2126ua-hero.overlay.json"
  ],
  "component": {
    "mpn": "INA2126UA",
    "manufacturer": "Texas Instruments",
    "package": "SOIC-16",
    "pin_count": 16,
    "category": "Amplifiers/Comparators",
    "subcategory": "Instrumentation Amplifiers",
    "datasheet": "https://www.ti.com/cn/lit/gpn/ina126",
    "parts": {
      "symbol": "ina2126ua.kicad_sym",
      "footprint": "ina2126ua.kicad_mod",
      "model_3d": "ina2126ua-hero.glb",
      "model_3d_plain": "ina2126ua.glb",
      "model_3d_step": "ina2126ua-etched.step",
      "model_3d_step_plain": "ina2126ua.step",
      "lbr": "ina2126ua.lbr"
    },
    "distributor_links": {
      "lcsc": "C2058579",
      "digikey": "INA2126UA-ND",
      "mouser": "595-INA2126UA"
    },
    "distributor_check": {
      "checked_at": "2026-10-10T23:30:15Z",
      "source": "Component Ocean /api/assign-pns",
      "digikey": {
        "pn": "INA2126UA-ND",
        "status": "found",
        "lifecycle": "Active"
      },
      "mouser": {
        "pn": "595-INA2126UA",
        "status": "found"
      }
    },
    "pins": [
      {
        "number": "1",
        "name": "V–INA",
        "type": "power_in",
        "description": "Negative input of amplifier A."
      },
      {
        "number": "2",
        "name": "V+INA",
        "type": "power_in",
        "description": "Positive input of amplifier A."
      },
      {
        "number": "3",
        "name": "RGA",
        "type": "passive",
        "description": "Gain-set pin for amplifier A; for gains greater than 5, a gain resistor is placed between pins 3 and 4 (gain = 5 + 80kΩ/RG)."
      },
      {
        "number": "4",
        "name": "RGA",
        "type": "passive",
        "description": "Gain-set pin for amplifier A; for gains greater than 5, a gain resistor is placed between pins 3 and 4 (gain = 5 + 80kΩ/RG)."
      },
      {
        "number": "5",
        "name": "RefA",
        "type": "input",
        "description": "Reference input for amplifier A, which must be driven from a low impedance source or grounded."
      },
      {
        "number": "6",
        "name": "VOA",
        "type": "output",
        "description": "Output of amplifier A."
      },
      {
        "number": "7",
        "name": "SenseA",
        "type": "input",
        "description": "Feedback sense input for amplifier A, which must be connected to VOA for proper operation."
      },
      {
        "number": "8",
        "name": "V–",
        "type": "power_in",
        "description": "Negative power supply; the datasheet recommends ±1.35 V to ±18 V dual supply or 2.7 V to 36 V single supply."
      },
      {
        "number": "9",
        "name": "V+",
        "type": "power_in",
        "description": "Positive power supply; the datasheet recommends ±1.35 V to ±18 V dual supply or 2.7 V to 36 V single supply."
      },
      {
        "number": "10",
        "name": "SenseB",
        "type": "input",
        "description": "Feedback sense input for amplifier B, which must be connected to VOB for proper operation."
      },
      {
        "number": "11",
        "name": "VOB",
        "type": "output",
        "description": "Output of amplifier B."
      },
      {
        "number": "12",
        "name": "RefB",
        "type": "input",
        "description": "Reference input for amplifier B, which must be driven from a low impedance source or grounded."
      },
      {
        "number": "13",
        "name": "RGB",
        "type": "passive",
        "description": "Gain-set pin for amplifier B; for gains greater than 5, a gain resistor is placed between pins 13 and 14 (gain = 5 + 80kΩ/RG)."
      },
      {
        "number": "14",
        "name": "RGB",
        "type": "passive",
        "description": "Gain-set pin for amplifier B; for gains greater than 5, a gain resistor is placed between pins 13 and 14 (gain = 5 + 80kΩ/RG)."
      },
      {
        "number": "15",
        "name": "V+INB",
        "type": "power_in",
        "description": "Positive input of amplifier B."
      },
      {
        "number": "16",
        "name": "V–INB",
        "type": "power_in",
        "description": "Negative input of amplifier B."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.3",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.3",
        "primary_model": "claude-haiku-5-5",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-5-5",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [
          "extractor flagged: The ordering table (page 22) lists INA2126UA in SOIC (D), 16 pins, confirming the SOIC-16 variant. P; The datasheet gives the RG pins type as '—' (not I/O). They are mapped to passive for KiCad ERC; thi; Pin names use the datasheet's en-dash form (V–INA, V–, V–INB). The supply voltage ranges in the V+/V"
        ],
        "pages_sent": 20,
        "cost_usd": 0.0954,
        "at": "2026-10-10T23:29:56"
      },
      "datasheet": {
        "url": "https://www.ti.com/cn/lit/gpn/ina126",
        "pages": 38,
        "sha256": "67a5c87b926613db",
        "source_tier": "lcsc"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 16,
        "described": 16,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "ina2126ua.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          6.0,
          9.9,
          1.75
        ],
        "zmin_mm": -0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "d5eeddb4c0b304dc61950919b126fc61d7586abd5f16ab71a2a79759ec6498bf",
        "checked": "2026-10-10",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "ina2126ua-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          6.0,
          9.9,
          1.75
        ],
        "zmin_mm": -0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "a6ad3830cc3d029f4b80ae547929a5956eb73d5f048633c31c83457bfec1d5e9",
        "checked": "2026-10-10",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  }
}