main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs ina210cidckr: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
viewers ina210cidckr: viewers · Ray
ina210cidckr-etched.fit.json ina210cidckr: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
ina210cidckr-etched.glb ina210cidckr: white body in tscircuit (pre-1.8 etch structure under an assembly instance); Ray 2026-10-19: black IC bod… · Ray
ina210cidckr-etched.step ina210cidckr: white body in tscircuit (pre-1.8 etch structure under an assembly instance); Ray 2026-10-19: black IC bod… · Ray
ina210cidckr-hero.glb ina210cidckr: hero from the plain model · Ray
ina210cidckr-hero.overlay.json ina210cidckr: hero from the plain model · Ray
ina210cidckr.glb Publish 0.1.0 · Ray
ina210cidckr.kicad_mod Publish 0.1.0 · Ray
ina210cidckr.kicad_sym Publish 0.1.0 · Ray
ina210cidckr.lbr Publish 0.1.0 · Ray
ina210cidckr.step Publish 0.1.0 · Ray
package.json Publish 0.1.1 · Ray
page.json Publish 0.1.1 · Ray
README.md ina210cidckr: specified limits as data (metadata.characteristics, 20 rows from the datasheet) · Ray

INA210CIDCKR

Texas Instruments · Current Sense Amplifiers · SC-70-6

INA210CIDCKR from Texas Instruments, in a SC-70-6. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 REF input Reference voltage input; sets output mid-point from 0V to V+
2 GND power_in Analog ground
3 V+ power_in Positive power supply; operating range 2.7V to 26V
4 IN+ input Positive differential analog input; connect to power side of shunt resistor
5 IN- input Negative differential analog input; connect to load side of shunt resistor
6 OUT output Analog voltage output; swings from approximately GND+0.005V to V+-0.05V

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package SC-70-6
Category Amplifiers/Comparators
Pins 6

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Common-mode input range (version B and C) VCM -0.1 26 V TA = -40°C to +125°C 7
Supply voltage operating range VS 2.7 26 V TA = -40°C to +125°C 8
Common-mode rejection ratio (INA210) CMRR 105 140 dB VIN+ = 0V to 26V, VSENSE = 0mV, TA = -40°C to +125°C 7
Offset voltage, RTI (INA210) VO -35 0.55 35 µV VSENSE = 0mV 7
Offset voltage drift vs temperature, RTI dVOS/dT 0.1 0.5 µV/°C VSENSE = 0mV, TA = -40°C to +125°C 7
Power supply rejection ratio, RTI PSRR -10 0.1 10 µV/V VS = 2.7V to 18V, VIN+ = 18V, VSENSE = 0mV 7
Input bias current IIB 15 28 35 µA VSENSE = 0mV 7
Gain error (version C) EG -0.5 0.02 0.5 % VSENSE = -5mV to 5mV, TA = -40°C to +125°C, version C 7
Gain error vs temperature 3 10 ppm/°C TA = -40°C to +125°C 7
Maximum capacitive load 1 nF No sustained oscillation 7
Quiescent current IQ 65 100 µA VSENSE = 0mV 8
Quiescent current over temperature range IQ 115 µA TA = -40°C to +125°C 8
Specified temperature range -40 125 °C 8
Operating temperature range -55 150 °C 8
Junction-to-ambient thermal resistance (SC70 per electrical table) θJA 250 °C/W SC70 package 8
Junction-to-ambient thermal resistance (DCK SC70 6-pin) RθJA 227.3 °C/W DCK (SC70) 6-pin package 6
Junction-to-case (top) thermal resistance (DCK) RθJC(top) 79.5 °C/W DCK (SC70) 6-pin package 6
Junction-to-board thermal resistance (DCK) RθJB 72.1 °C/W DCK (SC70) 6-pin package 6
Junction-to-top characterization parameter (DCK) ψJT 3.6 °C/W DCK (SC70) 6-pin package 6
Junction-to-board characterization parameter (DCK) ψJB 70.4 °C/W DCK (SC70) 6-pin package 6

CAD (KiCad official)

  • Symbol: INA210CIDCKR
  • Footprint: Package_TO_SOT_SMD:SOT-363_SC-70-6
  • 3D model: SC-70-6 (KiCad packages3D, STEP)
  • 3D model files: ina210cidckr-etched.step / ina210cidckr-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); ina210cidckr.step / ina210cidckr.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (50 pp, sha256 8bce21ab869b5599, retrieved 2026-09-27, tier: lcsc)
  • Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
  • Extractor: parts-factory 2.0.0 / extract_pins 0.2, primary claude-haiku-4-5-20251001 (text), consensus claude-sonnet-4-6 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF