component
INA210BIDCKR
Public Made by Adomby adom
Texas Instruments Current Sense Amplifiers, SC-70-6. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownINA210BIDCKR
Texas Instruments · Current Sense Amplifiers · SC-70-6
INA210BIDCKR from Texas Instruments, in a SC-70-6. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | REF | input | Reference voltage input, which can be set anywhere from 0 V to V+; it must not exceed the device supply voltage, and it should be buffered by an op amp if driven from a resistor divider. |
| 2 | GND | power_in | Analog ground. |
| 3 | V+ | power_in | Analog power supply, 2.7 V to 26 V. |
| 4 | IN+ | input | Analog input connected to the power-supply side of the shunt resistor; the input pins withstand the full common-mode range (up to 26 V) whether or not the device is powered. |
| 5 | IN- | input | Analog input connected to the load side of the shunt resistor; the input pins withstand the full common-mode range (up to 26 V) whether or not the device is powered. |
| 6 | OUT | output | Analog output voltage; the output swing is limited by the V+ supply voltage. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | SC-70-6 |
| Category | Amplifiers/Comparators |
| Pins | 6 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Common-mode input range (version B) | VCM | -0.1 | 26 | V | 版本 B 和 C, TA = –40°C 至 +125°C | 7 | |
| Gain error (version B) | EG | -1 | 0.02 | 1 | % | VSENSE = –5mV 至 5mV, TA = –40°C 至 +125°C (版本 A 和 B) | 7 |
| Offset voltage, RTI (INA210) | VO | -35 | 0.55 | 35 | µV | VSENSE = 0mV | 7 |
| Offset voltage drift vs temperature, RTI | dVOS/dT | 0.1 | 0.5 | µV/°C | VSENSE = 0mV, TA = –40°C 至 +125°C | 7 | |
| Input bias current | IIB | 15 | 28 | 35 | µA | VSENSE = 0mV | 7 |
| Power supply rejection ratio, RTI | PSRR | -10 | 0.1 | 10 | µV/V | VS = 2.7V 至 18V, VIN+ = 18V, VSENSE = 0mV | 7 |
| Common-mode rejection ratio (INA210) | CMRR | 105 | 140 | dB | VIN+ = 0V 至 26V, VSENSE = 0mV, TA = –40°C 至 +125°C | 7 | |
| Gain error vs temperature | 3 | 10 | ppm/°C | TA = -40°C 至 +125°C | 7 | ||
| Maximum capacitive load | 1 | nF | 无持续振荡 | 7 | |||
| Output swing to GND | 0.005 | 0.05 | V | (VGND) + 值, RL = 10kΩ 至 GND, TA = –40°C 至 +125°C | 7 | ||
| Supply voltage range | VS | 2.7 | 26 | V | TA = –40°C 至 +125°C | 8 | |
| Quiescent current | IQ | 65 | 100 | µA | VSENSE = 0mV | 8 | |
| Quiescent current over operating temperature range | IQ | 115 | µA | TA = -40°C 至 +125°C | 8 | ||
| Specified temperature range | -40 | 125 | °C | 8 | |||
| Operating temperature range | -55 | 150 | °C | 8 | |||
| Gain (INA210) | G | 200 | V/V | 7 | |||
| Junction-to-ambient thermal resistance (DCK, SC70-6) | RθJA | 227.3 | °C/W | DCK (SC70) 6 引脚 | 6 | ||
| Junction-to-ambient thermal resistance (SC70, electrical table) | θJA | 250 | °C/W | 8 | |||
| Junction-to-case (top) thermal resistance (DCK, SC70-6) | RθJC(top) | 79.5 | °C/W | DCK (SC70) 6 引脚 | 6 | ||
| Junction-to-board thermal resistance (DCK, SC70-6) | RθJB | 72.1 | °C/W | DCK (SC70) 6 引脚 | 6 | ||
| Junction-to-top characterization parameter (DCK, SC70-6) | ψJT | 3.6 | °C/W | DCK (SC70) 6 引脚 | 6 | ||
| Junction-to-board characterization parameter (DCK, SC70-6) | ψJB | 70.4 | °C/W | DCK (SC70) 6 引脚 | 6 |
CAD (KiCad official)
- Symbol:
INA210BIDCKR - Footprint:
Package_TO_SOT_SMD:SOT-363_SC-70-6 - 3D model: SC-70-6 (KiCad packages3D, STEP)
- 3D model files:
ina210bidckr-etched.step/ina210bidckr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);ina210bidckr.step/ina210bidckr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (50 pp, sha256
8bce21ab869b5599, retrieved 2026-10-11, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).