3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownINA210AIDCKT
Texas Instruments · Current Sense Amplifiers · SC-70-6
INA210AIDCKT from Texas Instruments, in a SC-70-6. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | REF | input | Analog reference voltage input, acceptable range 0V to V+, used to set the output voltage offset for zero current detection. |
| 2 | GND | power_in | Analog ground reference for the device. |
| 3 | V+ | power_in | Positive power supply input, operating range 2.7V to 26V, maximum quiescent current 100μA. |
| 4 | IN+ | input | Analog input connected to the power side of the external shunt resistor, common mode voltage range -0.3V to 26V. |
| 5 | IN- | input | Analog input connected to the load side of the external shunt resistor, common mode voltage range -0.3V to 26V. |
| 6 | OUT | output | Analog output voltage representing the amplified shunt voltage with 200V/V gain (INA210), output swing range (V+)-0.2V to (GND)+0.05V. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | SC-70-6 |
| Category | Amplifiers/Comparators |
| Pins | 6 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| 共模输入范围 版本A | VCM | -0.3 | 26 | V | TA = –40°C 至 +125°C | 7 | |
| CMRR 共模抑制比 INA210 | CMRR | 105 | 140 | dB | VIN+ = 0V 至 26V, VSENSE = 0mV, TA = –40°C 至 +125°C | 7 | |
| 失调电压 RTI INA210 | VOS | -35 | 0.55 | 35 | µV | VSENSE = 0mV | 7 |
| 输入偏置电流 | IIB | 15 | 28 | 35 | µA | VSENSE = 0mV | 7 |
| 增益误差 版本A | EG | -1 | 0.02 | 1 | % | VSENSE = –5mV 至 5mV, TA = –40°C 至 +125°C (版本 A 和 B) | 7 |
| 增益误差与温度间的关系 | 3 | 10 | ppm/°C | TA = -40°C 至 +125°C | 7 | ||
| 工作电源电压范围 | VS | 2.7 | 26 | V | TA = –40°C 至 +125°C | 8 | |
| 静态电流 | IQ | 65 | 100 | µA | VSENSE = 0mV | 8 | |
| 静态电流(工作温度范围内) | IQ | 115 | µA | TA = -40°C 至 +125°C | 8 | ||
| 指定的温度范围 | -40 | 125 | °C | 8 | |||
| 工作温度范围 | -55 | 150 | °C | 8 | |||
| 最大容性负载 | CLOAD | 1 | nF | 无持续振荡 | 7 | ||
| 非线性误差 | -0.01 | 0.01 | % | VSENSE = -5mV 至 5mV | 7 | ||
| dVOS/dT RTI 与温度间的关系 | dVOS/dT | 0.1 | 0.5 | µV/°C | VSENSE = 0mV, TA = –40°C 至 +125°C | 7 | |
| PSRR RTI 与电源比 | PSRR | -10 | 0.1 | 10 | µV/V | VS = 2.7V 至 18V, VIN+ = 18V, VSENSE = 0mV | 7 |
| 输入失调电流 | IIO | 0.02 | µA | VSENSE = 0mV | 7 | ||
| 增益 INA210 | G | 200 | V/V | 7 | |||
| 输出摆幅到 GND | 0.005 | 0.05 | V | RL = 10kΩ 至 GND, TA = –40°C 至 +125°C | 7 | ||
| 带宽 INA210 | BW | 14 | kHz | CLOAD = 10pF | 7 | ||
| 压摆率 | SR | 0.4 | V/µs | 8 | |||
| 电压噪声密度 RTI | 25 | nV/√Hz | 8 | ||||
| 结至环境热阻 DCK (SC70) | RθJA | 227.3 | °C/W | DCK (SC70) 6 引脚 | 6 | ||
| 结至外壳(顶部)热阻 DCK (SC70) | RθJC(top) | 79.5 | °C/W | DCK (SC70) 6 引脚 | 6 | ||
| 结至电路板热阻 DCK (SC70) | RθJB | 72.1 | °C/W | DCK (SC70) 6 引脚 | 6 | ||
| 结至顶部特征参数 DCK (SC70) | ψJT | 3.6 | °C/W | DCK (SC70) 6 引脚 | 6 | ||
| 结至电路板特征参数 DCK (SC70) | ψJB | 70.4 | °C/W | DCK (SC70) 6 引脚 | 6 |
CAD (KiCad official)
- Symbol:
INA210AIDCKT - Footprint:
Package_TO_SOT_SMD:SOT-363_SC-70-6 - 3D model: SC-70-6 (KiCad packages3D, STEP)
- 3D model files:
ina210aidckt-etched.step/ina210aidckt-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);ina210aidckt.step/ina210aidckt.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (50 pp, sha256
8bce21ab869b5599, retrieved 2026-09-24, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.2, primaryclaude-haiku-4-5-20251001(text), consensusclaude-sonnet-4-6(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).