main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs ina209aipwr: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
viewers ina209aipwr: viewers · Ray
ina209aipwr-etched.fit.json ina209aipwr: one-pass backfill (re-etched, hero rebuilt in-pass (inputs changed)) · Ray
ina209aipwr-etched.glb ina209aipwr: one-pass backfill (re-etched, hero rebuilt in-pass (inputs changed)) · Ray
ina209aipwr-etched.step ina209aipwr: one-pass backfill (re-etched, hero rebuilt in-pass (inputs changed)) · Ray
ina209aipwr-hero.glb ina209aipwr: hero from the plain model · Ray
ina209aipwr-hero.overlay.json ina209aipwr: hero from the plain model · Ray
ina209aipwr.glb Publish 0.1.0 · Ray
ina209aipwr.kicad_mod Publish 0.1.0 · Ray
ina209aipwr.kicad_sym Publish 0.1.0 · Ray
ina209aipwr.lbr Publish 0.1.0 · Ray
ina209aipwr.step Publish 0.1.0 · Ray
package.json Publish 0.1.1 · Ray
page.json Publish 0.1.1 · Ray
README.md ina209aipwr: specified limits as data (metadata.characteristics, 51 rows from the datasheet) · Ray

INA209AIPWR

Texas Instruments · Current Sense Amplifiers · TSSOP-16

INA209AIPWR from Texas Instruments, in a TSSOP-16. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 VIN+ power_in Positive differential shunt voltage input; connect to positive side of shunt resistor; voltage range ±40mV to ±320mV depending on PGA gain setting; common-mode range 0V to 26V.
2 VIN- power_in Negative differential shunt voltage input; connect to negative side of shunt resistor; bus voltage measured from this pin to ground; common-mode range 0V to 26V.
3 Convert input Digital input to trigger conversions in triggered mode; normally held high, take low for minimum 4µs to initiate conversion; tie high if unused.
4 GND power_in Ground connection; must be connected together with pin 11 to system ground.
5 VS+ power_in Power supply input; supply voltage range 3V to 5.5V; draw maximum 1.5mA quiescent current; connect together with pin 10.
6 GPIO bidirectional General-purpose input/output with totem-pole output topology; user-programmable via Critical DAC+ register; default state is high-impedance input; can be configured as output 0, output 1, or Hi-Z.
7 Critical tri_state Open-drain critical watchdog output; active-low; transparent (non-latched) by default; responds to Critical DAC comparator within 5µs of overload condition detection.
8 Overlimit tri_state Open-drain over-limit watchdog output; active-low; transparent (non-latched) by default; responds to over-limit comparator thresholds for bus voltage and power limits.
9 Warning tri_state Open-drain warning watchdog output; active-low; transparent (non-latched) by default; responds to warning comparator thresholds with programmable delay 0 to 1.5s.
10 VS+ power_in Power supply input; supply voltage range 3V to 5.5V; draw maximum 1.5mA quiescent current; connect together with pin 5.
11 GND power_in Ground connection; must be connected together with pin 4 to system ground.
12 SCL bidirectional I²C serial bus clock line; open-drain; supports fast (400kHz) and high-speed (3.4MHz) modes; integrated spike suppression and Schmitt trigger; 28ms SMBus timeout.
13 SDA bidirectional I²C serial bus data line; open-drain; supports fast (400kHz) and high-speed (3.4MHz) modes; integrated spike suppression and Schmitt trigger; 28ms SMBus timeout.
14 A0 input Address input pin; sets slave address bits A0 for I²C bus addressing; sampled at start of each communication; configure via pull-up to VS+ or pull-down to GND.
15 A1 input Address input pin; sets slave address bits A1 for I²C bus addressing; sampled at start of each communication; configure via pull-up to VS+ or pull-down to GND.
16 SMBus Alert tri_state Open-drain SMBus alert output; active-low; responds to warning, over-limit, critical faults, or conversion ready states; latched and cleared by status register read or alert response; controlled via SMBus Alert Mask/Enable Control Register.

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package TSSOP-16
Category Amplifiers/Comparators
Pins 16

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Supply Voltage VS 6 V 2
Differential input voltage (VIN+) - (VIN-) -26 26 V 2
Analog inputs VIN+, VIN- common-mode -0.3 26 V 2
Open-drain digital outputs -0.3 6 V referenced to GND 2
GPIO, Convert pins -0.3 V referenced to GND; max printed as VS + 0.3 V 2
Input current into any pin 5 mA 2
Open-drain digital output current 10 mA 2
Operating temperature -40 125 °C over operating free-air temperature range 2
Storage temperature -65 150 °C 2
Junction temperature 150 °C 2
ESD rating Human Body Model 2000 V 2
ESD rating Charged-Device Model 1000 V 2
ESD rating Machine Model 150 V 2
Full-scale current sense (input) voltage range 0 40 mV PGA = ÷ 1 3
Full-scale current sense (input) voltage range 0 80 mV PGA = ÷ 2 3
Full-scale current sense (input) voltage range 0 160 mV PGA = ÷ 4 3
Full-scale current sense (input) voltage range 0 320 mV PGA = ÷ 8 3
Bus voltage (input voltage) range 0 32 V BRNG = 1 3
Bus voltage (input voltage) range 0 16 V BRNG = 0 3
Common-mode rejection ratio CMRR CMRR 100 120 dB VIN+ = 0V to 26V 3
Offset voltage, RTI VOS -100 10 100 µV PGA = ÷ 1; typ printed ±10 3
Offset voltage, RTI VOS -125 20 125 µV PGA = ÷ 2; typ printed ±20 3
Offset voltage, RTI VOS -150 30 150 µV PGA = ÷ 4; typ printed ±30 3
Offset voltage, RTI VOS -200 40 200 µV PGA = ÷ 8; typ printed ±40 3
Current sense gain error -40 40 m% 3
Input leakage VIN+ pin -0.5 0.1 0.5 µA Power-Down Mode 3
Input leakage VIN- pin -0.5 0.1 0.5 µA Power-Down Mode 3
Current measurement error -0.5 0.2 0.5 % 3
Current measurement error -1 1 % over Temperature 3
Bus voltage measurement error -0.5 0.2 0.5 % 3
Bus voltage measurement error -1 1 % over Temperature 3
Critical DAC accuracy -1 0.5 1 % 3
Critical DAC comparator offset -1.6 0.3 1.6 mV 3
ADC conversion time 12-bit 532 586 µs 4
ADC conversion time 11-bit 276 304 µs 4
ADC conversion time 10-bit 148 163 µs 4
ADC conversion time 9-bit 84 93 µs 4
Minimum convert input low time 4 µs 4
SMBus timeout 28 35 ms resets interface when SCL or SDA low for over 28 ms 4
Input logic level high VIH 6 V min printed as 0.7 (VS) 4
Input logic level low VIL -0.3 V max printed as 0.3 (VS) 4
GPIO pin output low 0.15 0.4 V ISINK = 3mA 4
Open-drain logic '0' output level 0.15 0.4 V ISINK = 3mA 4
High-level output leakage current 0.1 1 µA VOUT = VS 4
Leakage input current 0.1 1 µA 0 ≤ VIN ≤ VS 4
Operating supply range VS 3 5.5 V 4
Quiescent current IQ 1 1.5 mA 4
Quiescent current, power-down mode IQ 6 15 µA power-down mode 4
Specified temperature range -25 85 °C boldface limits apply over this range 4
Operating temperature range -40 125 °C 4
Thermal resistance junction-to-ambient TSSOP-16 θJA 150 °C/W TSSOP-16 4

CAD (KiCad official)

  • Symbol: INA209AIPWR
  • Footprint: Package_SO:TSSOP-16_4.4x5mm_P0.65mm
  • 3D model: TSSOP-16 (KiCad packages3D, STEP)
  • 3D model files: ina209aipwr-etched.step / ina209aipwr-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); ina209aipwr.step / ina209aipwr.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (50 pp, sha256 fc088bc8d26a494f, retrieved 2026-09-27, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.2, primary claude-haiku-4-5-20251001 (text), consensus claude-sonnet-4-6 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF