3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownINA199C3RSWR
Texas Instruments · Current Sense Amplifiers · UQFN-10(1.4x1.8)
INA199C3RSWR from Texas Instruments, in a UQFN-10(1.4x1.8). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | NC | unconnected | No internal connection; may be left floating or connected to any voltage between GND and V+. |
| 2 | IN+ | input | Analog input; connect to power supply side of shunt resistor; must be tied together with pin 3. |
| 3 | IN+ | input | Analog input; connect to power supply side of shunt resistor; must be tied together with pin 2. |
| 4 | IN- | input | Analog input; connect to load side of shunt resistor; must be tied together with pin 5. |
| 5 | IN- | input | Analog input; connect to load side of shunt resistor; must be tied together with pin 4. |
| 6 | V+ | power_in | Analog power supply, 2.7V to 26V. |
| 7 | NC | unconnected | No internal connection; may be left floating or connected to any voltage between GND and V+. |
| 8 | REF | input | Analog reference input voltage, 0V to V+; sets output offset for single-ended or bidirectional operation. |
| 9 | GND | power_in | Analog ground; return path for signal and power circuits. |
| 10 | OUT | output | Analog output; 200V/V gain with output swing from GND+5mV to V+-50mV into 10kΩ load. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | UQFN-10(1.4x1.8) |
| Category | Amplifiers/Comparators |
| Pins | 10 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Common-mode input range (version B and C) | VCM | -0.1 | 26 | V | TA = –40°C 至 125°C | 6 | |
| Common-mode rejection | CMR | 100 | 120 | dB | VIN+ = 0V 至 26V,VSENSE = 0mV,TA = –40°C 至 125°C | 6 | |
| Input offset voltage, RTI | VOS | -150 | 5 | 150 | μV | VSENSE = 0mV | 6 |
| Offset voltage drift | dVOS/dT | 0.1 | 0.5 | μV/°C | TA = –40°C 至 125°C | 6 | |
| Gain error (version C) | -1 | 0.03 | 1 | % | 版本 C,VSENSE = –5mV 至 5mV,TA = –40°C 至 125°C | 6 | |
| Gain error drift | 3 | 10 | ppm/°C | TA = –40°C 至 125°C | 6 | ||
| Maximum capacitive load | 1 | nF | 无持续振荡 | 6 | |||
| Output swing to GND | 0.005 | 0.05 | V | RL = 10kΩ 至 GND,TA= –40°C 至 125°C | 6 | ||
| Supply voltage operating range | VS | 2.7 | 26 | V | TA = –40°C 至 125°C | 6 | |
| Supply voltage operating range | VS | 2.5 | 26 | V | –20°C 至 85°C | 6 | |
| Quiescent current | IQ | 65 | 100 | μA | VSENSE = 0mV | 6 | |
| Quiescent current over temperature range | IQ | 115 | μA | TA = –40°C 至 125°C | 6 | ||
| Specified temperature range | -40 | 125 | °C | 6 | |||
| Operating temperature range | -40 | 125 | °C | 6 | |||
| Common-mode input voltage | VCM | 12 | V | 5 | |||
| Supply voltage (applied to V+) | VS | 5 | V | 5 | |||
| Operating temperature range, natural convection | TA | -40 | 125 | °C | 自然通风条件下 | 5 | |
| Junction-to-ambient thermal resistance (UQFN-10, RSW) | RθJA | 107.3 | °C/W | 5 | |||
| Junction-to-case (top) thermal resistance (UQFN-10, RSW) | RθJC(top) | 56.5 | °C/W | 5 | |||
| Junction-to-board thermal resistance (UQFN-10, RSW) | RθJB | 18.7 | °C/W | 5 | |||
| Thermal resistance, electrical table entry (UQFN) | θJA | 80 | °C/W | 7 |
CAD (KiCad official)
- Symbol:
INA199C3RSWR - Footprint:
Package_DFN_QFN:UQFN-10_1.4x1.8mm_P0.4mm - 3D model: UQFN-10(1.4x1.8) (KiCad packages3D, STEP)
- 3D model files:
ina199c3rswr-etched.step/ina199c3rswr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);ina199c3rswr.step/ina199c3rswr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (43 pp, sha256
f48fb5be37c0cf43, retrieved 2026-10-06, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-4-5-20251001(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).