main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs ina199b2qdckrq1: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
viewers ina199b2qdckrq1: viewers · Ray
ina199b2qdckrq1-etched.fit.json ina199b2qdckrq1: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
ina199b2qdckrq1-etched.glb ina199b2qdckrq1: white body in tscircuit (pre-1.8 etch structure under an assembly instance); Ray 2026-10-19: black IC… · Ray
ina199b2qdckrq1-etched.step ina199b2qdckrq1: white body in tscircuit (pre-1.8 etch structure under an assembly instance); Ray 2026-10-19: black IC… · Ray
ina199b2qdckrq1.glb Publish 0.1.0 · Ray
ina199b2qdckrq1.kicad_mod Publish 0.1.0 · Ray
ina199b2qdckrq1.kicad_sym Publish 0.1.0 · Ray
ina199b2qdckrq1.lbr Publish 0.1.0 · Ray
ina199b2qdckrq1.step Publish 0.1.0 · Ray
package.json Publish 0.1.0 · Ray
page.json ina199b2qdckrq1: white body in tscircuit (pre-1.8 etch structure under an assembly instance); Ray 2026-10-19: black IC… · Ray
README.md ina199b2qdckrq1: specified limits as data (metadata.characteristics, 23 rows from the datasheet) · Ray

INA199B2QDCKRQ1

Texas Instruments · Current Sense Amplifiers · SC-70-6

INA199B2QDCKRQ1 from Texas Instruments, in a SC-70-6. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 REF input Reference voltage input that sets the output zero level. Valid range 0V to V+. Drive from a low-impedance source (or ground for unidirectional low-side sensing).
2 GND power_in Device analog ground return.
3 V+ power_in Positive supply, 2.7V to 26V (absolute max 28V). Typical bypass 0.01µF-0.1µF from V+ to GND. Iq ≤ 100µA.
4 IN+ input Non-inverting current-sense input. Connect to the supply-side terminal of the external shunt resistor. Common-mode range -0.1V to 26V, independent of V+.
5 IN- input Inverting current-sense input. Connect to the load-side terminal of the external shunt resistor. Common-mode range -0.1V to 26V.
6 OUT output Analog voltage output. VOUT = REF + 100 × (VIN+ - VIN-) for the B2 variant (100V/V gain). Swings within the V+/GND rails.

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package SC-70-6
Category Amplifiers/Comparators
Pins 6

Ordering variants

Same part, different packaging or reel option.

  • INA199B2QDCKRQ1
  • INA199B2QDCKRQ1DCKT

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Common-mode input voltage (VCM) VCM -0.1 26 V TA = -40°C to +125°C 5
Common-mode rejection (CMR) CMR 100 120 dB VIN+ = 0V to 26V, VSENSE = 0mV, TA = -40°C to +125°C 5
Input offset voltage, RTI VOS -150 5 150 µV VSENSE = 0mV 5
Offset voltage drift vs temperature dVOS/dT 0.1 0.5 µV/°C TA = -40°C to +125°C 5
Gain error (B version) G -1.5 0.03 1.5 % VSENSE = -5mV to +5mV, TA = -40°C to +125°C 5
Gain error drift vs temperature 3 10 ppm/°C TA = -40°C to +125°C 5
Maximum capacitive load CLOAD 1 nF No sustained oscillation 5
Output swing to GND (offset above GND) VGND 0.005 0.05 V RL = 10kΩ to GND, TA = -40°C to +125°C 5
Quiescent current IQ 65 100 µA VSENSE = 0mV 5
Quiescent current over operating temperature range IQ 115 µA TA = -40°C to +125°C 5
Supply voltage (operating, applied to V+) VS 2.7 5 26 V 4
Operating ambient temperature TA -40 125 °C Natural ventilation 4
Supply voltage VS 28 V 4
Differential analog input voltage VIN+ - VIN- -28 28 V Differential (VIN+)-(VIN-) 4
Common-mode analog input voltage (referenced to GND) VIN -0.1 28 V Common mode, referenced to GND 4
Operating temperature TA -40 125 °C Natural ventilation 4
Junction temperature TJ 150 °C 4
Storage temperature Tstg -65 150 °C 4
Junction-to-ambient thermal resistance RθJA 227.3 °C/W DCK (SC70) 6-pin package 4
Junction-to-case (top) thermal resistance RθJC(top) 79.5 °C/W DCK (SC70) 6-pin package 4
Junction-to-board thermal resistance RθJB 72.1 °C/W DCK (SC70) 6-pin package 4
Junction-to-top characterization parameter ψJT 3.6 °C/W DCK (SC70) 6-pin package 4
Junction-to-board characterization parameter ψJB 70.4 °C/W DCK (SC70) 6-pin package 4

CAD (KiCad official)

  • Symbol: INA199B2QDCKRQ1
  • Footprint: Package_TO_SOT_SMD:SOT-363_SC-70-6
  • 3D model: SC-70-6 (KiCad packages3D, STEP)
  • 3D model files: ina199b2qdckrq1-etched.step / ina199b2qdckrq1-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); ina199b2qdckrq1.step / ina199b2qdckrq1.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (None pp, sha256 2df6a8494f6d9d8b, retrieved 2026-08-17, tier: lcsc)
  • Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
  • Extractor: ds2sf (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF