main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs ina199b2dckr: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
viewers ina199b2dckr: viewers · Ray
ina199b2dckr-etched.fit.json ina199b2dckr: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
ina199b2dckr-etched.glb ina199b2dckr: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
ina199b2dckr-etched.step ina199b2dckr: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
ina199b2dckr.glb Publish 0.1.0 · Ray
ina199b2dckr.kicad_mod Publish 0.1.0 · Ray
ina199b2dckr.kicad_sym Publish 0.1.0 · Ray
ina199b2dckr.lbr Publish 0.1.0 · Ray
ina199b2dckr.step Publish 0.1.0 · Ray
package.json Publish 0.1.0 · Ray
page.json ina199b2dckr: specified limits as data (metadata.characteristics, 36 rows from the datasheet) · Ray
README.md ina199b2dckr: specified limits as data (metadata.characteristics, 36 rows from the datasheet) · Ray

INA199B2DCKR

Texas Instruments · Current-Sensing Amplifiers · SOT-363-6

INA199B2DCKR from Texas Instruments, in a SOT-363-6. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 REF input Reference voltage input, 0 V to V+. Sets the output-voltage level that corresponds to zero differential input (VSENSE = 0), enabling bidirectional current sensing when biased to mid-supply (typically VS/2).
2 GND power_in Analog ground return for the device.
3 V+ power_in Analog power supply, 2.7 V to 26 V (absolute max 26 V). Independent of the sensed common-mode input voltage.
4 IN+ input Non-inverting analog input; connect to the supply side of the external shunt resistor. Common-mode range -0.1 V to 26 V for the B version, independent of V+.
5 IN- input Inverting analog input; connect to the load side of the external shunt resistor. Common-mode range -0.1 V to 26 V for the B version, independent of V+.
6 OUT output Analog voltage output. VOUT = REF + Gain × (VIN+ - VIN-); Gain = 100 V/V for the INA199B2. Swings to within 50 mV of V+ and 5 mV of GND with a 10-kΩ load.

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package SOT-363-6
Category Op-amp/Cmp
Pins 6

Ordering variants

  • INA199B2DCKR
  • INA199B2DCKRDCKT
  • INA199B2DCKRRSWR
  • INA199B2DCKRRSWT

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Gain error (Version A and B) -1.5 0.03 1.5 % Version A and B, VSENSE = –5 mV to 5 mV, TA = –40°C to 125°C 7
Gain error vs temperature 3 10 ppm/°C TA = –40°C to 125°C 7
Common-mode input range VCM -0.1 26 V Version B and C, TA = –40°C to 125°C 7
Common-mode rejection CMR 100 120 dB VIN+ = 0 V to 26 V, VSENSE = 0 mV, TA = –40°C to 125°C 7
Offset voltage, RTI VOS -150 5 150 μV VSENSE = 0 mV 7
VOS vs temperature dVOS/dT 0.1 0.5 μV/°C TA = –40°C to 125°C 7
Maximum capacitive load CLOAD 1 nF No sustained oscillation 7
Swing to V+ power-supply rail 0.05 0.2 V RL = 10 kΩ to GND, TA = –40°C to 125°C; printed as (V+) – x V 7
Swing to GND 0.005 0.05 V RL = 10 kΩ to GND, TA = –40°C to 125°C; printed as (VGND) + x V 7
Operating voltage range VS 2.7 26 V TA = –40°C to 125°C 7
Operating voltage range VS 2.5 26 V –20°C to 85°C 7
Quiescent current IQ 65 100 μA VSENSE = 0 mV 7
Quiescent current over temperature IQ 115 μA TA = –40°C to 125°C 7
Specified temperature range -40 125 °C 7
Operating temperature range (electrical table) -40 125 °C 7
Supply voltage 26 V 5
Differential analog input (VIN+) – (VIN–) VIN+, VIN– -26 26 V 5
Common-mode analog input, INA199Bx and INA199Cx VIN+, VIN– -0.1 26 V Referenced to GND (GND – 0.1 V to 26 V) 5
REF input voltage VREF -0.3 0.3 V Min referenced to GND (GND – 0.3 V); max referenced to V+ ((V+) + 0.3 V) 5
Output voltage VOUT -0.3 0.3 V Min referenced to GND (GND – 0.3 V); max referenced to V+ ((V+) + 0.3 V) 5
Input current into all pins IIN 5 mA 5
Operating temperature TA -40 125 °C 5
Junction temperature TJ 150 °C 5
Storage temperature Tstg -65 150 °C 5
Electrostatic discharge, human-body model (INA199Bx, INA199Cx in DCK and RSW) V(ESD) -3500 3500 V HBM per ANSI/ESDA/JEDEC JS-001 5
Electrostatic discharge, charged-device model (INA199Bx, INA199Cx in DCK and RSW) V(ESD) -1000 1000 V CDM per JEDEC JESD22-C101 5
Common-mode input voltage VCM 12 V 6
Operating supply voltage (applied to V+) VS 5 V 6
Operating free-air temperature TA -40 125 °C 6
Junction-to-ambient thermal resistance (DCK, SC70) RθJA 227.3 °C/W 6
Junction-to-case (top) thermal resistance (DCK, SC70) RθJC(top) 79.5 °C/W 6
Junction-to-board thermal resistance (DCK, SC70) RθJB 72.1 °C/W 6
Junction-to-top characterization parameter (DCK, SC70) ψJT 3.6 °C/W 6
Junction-to-board characterization parameter (DCK, SC70) ψJB 70.4 °C/W 6
Thermal resistance (SC70) θJA 250 °C/W 7
Gain, INA199x2 G 100 V/V INA199x2 7

CAD (KiCad official)

  • Symbol: INA199B2DCKR
  • Footprint: Package_TO_SOT_SMD:SOT-363_SC-70-6
  • 3D model: SOT-363-6 (KiCad packages3D, STEP)
  • 3D model files: ina199b2dckr-etched.step / ina199b2dckr-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); ina199b2dckr.step / ina199b2dckr.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (None pp, sha256 7aa8a4e2d65ee36a, retrieved 2026-08-17, tier: manufacturer)
  • Extractor: ds2sf (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF