main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs ina199a1dckt: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
viewers ina199a1dckt: viewers · Ray
ina199a1dckt-etched.fit.json ina199a1dckt: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
ina199a1dckt-etched.glb ina199a1dckt: white body in tscircuit (pre-1.8 etch structure under an assembly instance); Ray 2026-10-19: black IC bod… · Ray
ina199a1dckt-etched.step ina199a1dckt: white body in tscircuit (pre-1.8 etch structure under an assembly instance); Ray 2026-10-19: black IC bod… · Ray
ina199a1dckt-hero.glb ina199a1dckt: hero from the plain model · Ray
ina199a1dckt-hero.overlay.json ina199a1dckt: hero from the plain model · Ray
ina199a1dckt.glb Publish 0.1.0 · Ray
ina199a1dckt.kicad_mod Publish 0.1.0 · Ray
ina199a1dckt.kicad_sym Publish 0.1.0 · Ray
ina199a1dckt.lbr Publish 0.1.0 · Ray
ina199a1dckt.step Publish 0.1.0 · Ray
package.json Publish 0.1.1 · Ray
page.json Publish 0.1.1 · Ray
README.md ina199a1dckt: specified limits as data (metadata.characteristics, 31 rows from the datasheet) · Ray

INA199A1DCKT

Texas Instruments · Current Sense Amplifiers · SC-70-6

INA199A1DCKT from Texas Instruments, in a SC-70-6. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 REF input Reference voltage input; accepts 0V to V+ and sets output zero-level offset for single-ended or mid-scale bias for bidirectional current measurement.
2 GND power_in Analog ground reference.
3 V+ power_in Power supply input; operating range 2.7V to 26V.
4 IN+ input Positive differential analog input; connects to power side of shunt resistor for measuring voltage drop.
5 IN- input Negative differential analog input; connects to load side of shunt resistor for measuring voltage drop.
6 OUT output Analog output voltage; output range (V+)-0.2V to (V+)-0.05V relative to V+ and GND+0.005V to GND+0.05V for 10kΩ load to GND.

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package SC-70-6
Category Amplifiers/Comparators
Pins 6

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Common-mode input voltage range (version A) VCM -0.3 26 V Version A, TA = –40°C to 125°C 6
Common-mode rejection ratio CMR 100 120 dB VIN+ = 0V to 26V, VSENSE = 0mV, TA = –40°C to 125°C 6
Offset voltage, RTI VOS -150 5 150 μV VSENSE = 0mV 6
Offset voltage drift dVOS/dT 0.1 0.5 μV/°C TA = –40°C to 125°C 6
Gain error (versions A and B) -1.5 0.03 1.5 % Versions A and B, VSENSE = –5mV to 5mV, TA = –40°C to 125°C 6
Gain error drift 3 10 ppm/°C TA = –40°C to 125°C 6
Maximum capacitive load 1 nF No sustained oscillation 6
Operating voltage range (supply) VS 2.7 26 V TA = –40°C to 125°C 6
Operating voltage range (supply) VS 2.5 26 V –20°C to 85°C 6
Quiescent current IQ 65 100 μA VSENSE = 0mV 6
Quiescent current over temperature range IQ 115 μA TA = –40°C to 125°C 6
Specified temperature range -40 125 °C 6
Operating temperature range -40 125 °C 6
Supply voltage 26 V 4
Differential input voltage (VIN+)-(VIN-) -26 26 V 4
Common-mode voltage -0.3 26 V INA199Ax 4
REF input voltage -0.3 V Lower limit GND – 0.3 V; upper limit (V+) + 0.3 V not numeric 4
Output voltage -0.3 V Lower limit GND – 0.3 V; upper limit (V+) + 0.3 V not numeric 4
Input current into any pin 5 mA 4
Operating temperature (absolute maximum) -40 125 °C 4
Junction temperature 150 °C 4
Storage temperature Tstg -65 150 °C 4
Common-mode voltage VCM 12 V 5
Operating supply voltage (applied to V+) VS 5 V 5
Operating temperature range, natural convection TA -40 125 °C 5
Junction-to-ambient thermal resistance RθJA 227.3 °C/W DCK (SC70) 6-pin package 5
Junction-to-case (top) thermal resistance RθJC(top) 79.5 °C/W DCK (SC70) 6-pin package 5
Junction-to-board thermal resistance RθJB 72.1 °C/W DCK (SC70) 6-pin package 5
Junction-to-top characterization parameter ψJT 3.6 °C/W DCK (SC70) 6-pin package 5
Junction-to-board characterization parameter ψJB 70.4 °C/W DCK (SC70) 6-pin package 5
Thermal resistance, junction to ambient (electrical table) θJA 250 °C/W SC70 package 7

CAD (KiCad official)

  • Symbol: INA199A1DCKT
  • Footprint: Package_TO_SOT_SMD:SOT-363_SC-70-6
  • 3D model: SC-70-6 (KiCad packages3D, STEP)
  • 3D model files: ina199a1dckt-etched.step / ina199a1dckt-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); ina199a1dckt.step / ina199a1dckt.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (43 pp, sha256 f48fb5be37c0cf43, retrieved 2026-09-26, tier: lcsc)
  • Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
  • Extractor: parts-factory 2.0.0 / extract_pins 0.2, primary claude-haiku-4-5-20251001 (text), consensus claude-sonnet-4-6 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF