Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

INA190A5IDCKR

Texas Instruments · Current Sense Amplifiers · SC-70-6

INA190A5IDCKR from Texas Instruments, in a SC-70-6. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 REF input Reference voltage input (GND to VS) for enabling bidirectional current sensing or ground for unidirectional operation.
2 GND power_in Analog ground reference.
3 VS power_in Power supply input, 1.7 V to 5.5 V.
4 IN+ input Positive input of current-sense amplifier with common-mode voltage range -0.2 V to +40 V for high-side or low-side sensing configuration.
5 IN- input Negative input of current-sense amplifier with common-mode voltage range -0.2 V to +40 V and maximum differential input of ±42 V.
6 OUT output Analog output voltage equal to (IN+ - IN-) × 500 V/V + VREF with output swing from GND + 0.05 mV to VS - 20 mV at 10 kΩ load.

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package SC-70-6
Category Amplifiers/Comparators
Pins 6

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Supply voltage VS 6 V 4
Differential input voltage (VIN+) – (VIN–) VIN+, VIN– -42 42 V 4
Analog input voltage, with respect to GND VIN+, VIN– -0.3 42 V with respect to GND 4
REF, OUT voltage, with respect to GND REF, OUT -0.3 V with respect to GND 4
Input current into any pin 5 mA 4
Operating temperature TA -55 150 °C 4
Junction temperature TJ 150 °C 4
Storage temperature Tstg -65 150 °C 4
Common-mode input range VCM -0.2 40 V 4
Input pin voltage range VIN+, VIN– -0.2 40 V 4
Operating supply voltage VS 1.7 5.5 V 4
Operating free-air temperature TA -40 125 °C 4
Offset voltage, RTI VOS -15 -3 15 µV VS = 1.8 V, VSENSE = 0 mV 5
Power-supply rejection ratio, RTI PSRR -5 -1 5 µV/V VSENSE = 0 mV, VS = 1.7 V to 5.5 V 5
Common-mode rejection ratio CMRR 132 150 dB VSENSE = 0 mV, VIN+ = –0.1 V to 40 V, TA = –40°C to +125°C 5
Offset drift, RTI dVOS/dT 10 80 nV/°C VSENSE = 0 mV, TA = –40°C to +125°C 5
Input bias current IIB 0.5 3 nA VSENSE = 0 mV 5
Input offset current IIO -0.07 0.07 nA VSENSE = 0 mV 5
Gain error, A5 devices EG -0.4 -0.08 0.4 % A5 devices, VOUT = 0.1 V to VS – 0.1 V 5
Gain error drift 2 7 ppm/°C TA = –40°C to +125°C 5
Nonlinearity error -0.01 0.01 % VOUT = 0.1 V to VS – 0.1 V 5
Reference voltage rejection ratio, A4 and A5 devices (max) RVRR -3 3 µV/V VREF = 100 mV to VS – 100 mV, TA = –40°C to +125°C; A4, A5 devices 5
Reference voltage rejection ratio, A4 and A5 devices (typical) RVRR -0.25 0.25 µV/V VREF = 100 mV to VS – 100 mV, TA = –40°C to +125°C; A4, A5 devices 5
Maximum capacitive load 1 nF No sustained oscillation 5
Quiescent current IQ 48 65 µA VS = 1.8 V, VSENSE = 0 mV 6
Quiescent current over temperature IQ 90 µA VS = 1.8 V, VSENSE = 0 mV, TA = –40°C to +125°C 6
Gain, A5 devices G 500 V/V A5 devices 5
Bandwidth, A5 devices BW 27 kHz A5 devices, CLOAD = 10 pF 5
Slew rate SR 0.3 V/µs VS = 5.0 V, VOUT = 0.5 V to 4.5 V 5
Settling time tS 30 µs From current step to within 1% of final value 5
Voltage noise density, RTI 75 nV/√Hz 6
RθJA junction-to-ambient thermal resistance, DCK (SC70, 6 pins) RθJA 137.2 °C/W DCK (SC70) 6-pin package 4
RθJC(top) junction-to-case (top) thermal resistance, DCK (SC70, 6 pins) RθJC(top) 38.4 °C/W DCK (SC70) 6-pin package 4
RθJB junction-to-board thermal resistance, DCK (SC70, 6 pins) RθJB 57.1 °C/W DCK (SC70) 6-pin package 4
ΨJT junction-to-top characterization parameter, DCK (SC70, 6 pins) ΨJT 5.1 °C/W DCK (SC70) 6-pin package 4
ΨJB junction-to-board characterization parameter, DCK (SC70, 6 pins) ΨJB 56.6 °C/W DCK (SC70) 6-pin package 4

CAD (KiCad official)

  • Symbol: INA190A5IDCKR
  • Footprint: Package_TO_SOT_SMD:SOT-363_SC-70-6
  • 3D model: SC-70-6 (KiCad packages3D, STEP)
  • 3D model files: ina190a5idckr-etched.step / ina190a5idckr-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); ina190a5idckr.step / ina190a5idckr.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (47 pp, sha256 38a7102701707c17, retrieved 2026-09-27, tier: lcsc)
  • Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
  • Extractor: parts-factory 2.0.0 / extract_pins 0.2, primary claude-haiku-4-5-20251001 (text), consensus claude-sonnet-4-6 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF