main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs ina190a4idckr: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
viewers ina190a4idckr: viewers · Ray
ina190a4idckr-etched.fit.json ina190a4idckr: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
ina190a4idckr-etched.glb ina190a4idckr: white body in tscircuit (pre-1.8 etch structure under an assembly instance); Ray 2026-10-19: black IC bo… · Ray
ina190a4idckr-etched.step ina190a4idckr: white body in tscircuit (pre-1.8 etch structure under an assembly instance); Ray 2026-10-19: black IC bo… · Ray
ina190a4idckr-hero.glb ina190a4idckr: hero from the plain model · Ray
ina190a4idckr-hero.overlay.json ina190a4idckr: hero from the plain model · Ray
ina190a4idckr.glb Publish 0.1.0 · Ray
ina190a4idckr.kicad_mod Publish 0.1.0 · Ray
ina190a4idckr.kicad_sym Publish 0.1.0 · Ray
ina190a4idckr.lbr Publish 0.1.0 · Ray
ina190a4idckr.step Publish 0.1.0 · Ray
package.json Publish 0.1.1 · Ray
page.json Publish 0.1.1 · Ray
README.md ina190a4idckr: specified limits as data (metadata.characteristics, 28 rows from the datasheet) · Ray

INA190A4IDCKR

Texas Instruments · Current Sense Amplifiers · SC-70-6

INA190A4IDCKR from Texas Instruments, in a SC-70-6. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 REF input Reference input for bidirectional current sensing; externally applied voltage range from GND to VS enables output offset.
2 GND power_in Analog ground reference.
3 VS power_in Analog power supply input, operating range 1.7 V to 5.5 V.
4 IN+ input Current-sense amplifier positive input; connect to bus voltage side of sense resistor for high-side sensing or load side for low-side sensing.
5 IN- input Current-sense amplifier negative input; connect to load side of sense resistor for high-side sensing or ground side for low-side sensing.
6 OUT output Analog output voltage equal to the gained voltage difference (IN+ minus IN−) multiplied by gain plus reference offset voltage at REF pin.

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package SC-70-6
Category Amplifiers/Comparators
Pins 6

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Common-mode rejection ratio CMRR 132 150 dB VSENSE = 0 mV, VIN+ = –0.1 V to 40 V, TA = –40°C to +125°C 5
Offset voltage, RTI VOS -15 -3 15 µV VS = 1.8 V, VSENSE = 0 mV 5
Power-supply rejection ratio, RTI PSRR -5 -1 5 µV/V VSENSE = 0 mV, VS = 1.7 V to 5.5 V 5
Offset drift, RTI dVOS/dT 10 80 nV/°C VSENSE = 0 mV, TA = –40°C to +125°C 5
Input bias current IIB 0.5 3 nA VSENSE = 0 mV 5
Gain error (A2, A3, A4 devices) EG -0.3 -0.06 0.3 % VOUT = 0.1 V to VS – 0.1 V 5
Gain error drift 2 7 ppm/°C TA = –40°C to +125°C 5
Nonlinearity error -0.01 0.01 % VOUT = 0.1 V to VS – 0.1 V 5
Reference voltage rejection ratio (A4, A5 devices) RVRR -3 3 µV/V VREF = 100 mV to VS – 100 mV, TA = –40°C to +125°C 5
Maximum capacitive load 1 nF No sustained oscillation 5
Quiescent current IQ 48 65 µA VS = 1.8 V, VSENSE = 0 mV 6
Quiescent current over temperature IQ 90 µA VS = 1.8 V, VSENSE = 0 mV, TA = –40°C to +125°C 6
Supply voltage VS 6 V 4
Analog inputs differential voltage VIN+, VIN– -42 42 V Differential (VIN+) – (VIN–) 4
Analog inputs voltage with respect to GND VIN+, VIN– 42 V With respect to GND 4
Input current into any pin 5 mA 4
Operating temperature TA -55 150 °C 4
Junction temperature TJ 150 °C 4
Storage temperature Tstg -65 150 °C 4
Common-mode input range VCM 40 V 4
Input pin voltage range VIN+, VIN– 40 V 4
Operating supply voltage VS 1.7 5.5 V 4
Operating free-air temperature TA -40 125 °C 4
Junction-to-ambient thermal resistance (DCK, SC70) RθJA 137.2 °C/W DCK (SC70) 6-pin package column 4
Junction-to-case (top) thermal resistance (DCK, SC70) RθJC(top) 38.4 °C/W DCK (SC70) 6-pin package column 4
Junction-to-board thermal resistance (DCK, SC70) RθJB 57.1 °C/W DCK (SC70) 6-pin package column 4
Junction-to-top characterization parameter (DCK, SC70) ΨJT 5.1 °C/W DCK (SC70) 6-pin package column 4
Junction-to-board characterization parameter (DCK, SC70) ΨJB 56.6 °C/W DCK (SC70) 6-pin package column 4

CAD (KiCad official)

  • Symbol: INA190A4IDCKR
  • Footprint: Package_TO_SOT_SMD:SOT-363_SC-70-6
  • 3D model: SC-70-6 (KiCad packages3D, STEP)
  • 3D model files: ina190a4idckr-etched.step / ina190a4idckr-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); ina190a4idckr.step / ina190a4idckr.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (47 pp, sha256 38a7102701707c17, retrieved 2026-09-24, tier: lcsc)
  • Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
  • Extractor: parts-factory 2.0.0 / extract_pins 0.2, primary claude-haiku-4-5-20251001 (text), consensus claude-sonnet-4-6 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF