component
INA190A2QDCKRQ1
Public Made by Adomby adom
Texas Instruments Current Sense Amplifiers, SC-70-6. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads on click. Unloads only if this page sits in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads on click. Unloads only if this page sits in the background.
PCB Footprint
Open full view ↗Loads on click. Unloads only if this page sits in the background.
Datasheet
Open in new tab ↗Loads on click. Unloads only if this page sits in the background.
README
markdownINA190A2QDCKRQ1
Texas Instruments · Current Sense Amplifiers · SC-70-6
INA190A2QDCKRQ1 from Texas Instruments, in a SC-70-6. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | REF | input | Reference input that enables bidirectional current sensing with an externally applied voltage, with a reference pin voltage range of GND to VS. |
| 2 | GND | power_in | Analog ground. |
| 3 | VS | power_in | Analog power supply, 1.7 V to 5.5 V. |
| 4 | IN+ | input | Current-sense amplifier positive input; connect to the bus-voltage side of the sense resistor for high-side use or the load side for low-side use, with an input pin voltage range of GND - 0.2 V to 40 V. |
| 5 | IN- | input | Current-sense amplifier negative input; connect to the load side of the sense resistor for high-side use or the ground side for low-side use, with an input pin voltage range of GND - 0.2 V to 40 V. |
| 6 | OUT | output | Analog output providing the gained-up voltage difference from IN+ to IN-, offset by the voltage applied to the REF pin. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | SC-70-6 |
| Category | Amplifiers/Comparators |
| Pins | 6 |
CAD (KiCad official)
- Symbol:
INA190A2QDCKRQ1 - Footprint:
Package_TO_SOT_SMD:SOT-363_SC-70-6 - 3D model: SC-70-6 (KiCad packages3D, STEP)
- 3D model files:
ina190a2qdckrq1-etched.step/ina190a2qdckrq1-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);ina190a2qdckrq1.step/ina190a2qdckrq1.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (41 pp, sha256
bbc19aeacebcd477, retrieved 2026-10-08, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).