component
INA190A1IRSWT
Public Made by Adomby adom
Texas Instruments Current-Sensing Amplifiers, UQFN-10(1.4x1.8). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownINA190A1IRSWT
Texas Instruments · Current-Sensing Amplifiers · UQFN-10(1.4x1.8)
INA190A1IRSWT from Texas Instruments, in a UQFN-10(1.4x1.8). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | NC | unconnected | Not internally connected; float these pins or connect to any voltage between GND and VS. |
| 2 | NC | unconnected | Not internally connected; float these pins or connect to any voltage between GND and VS. |
| 3 | IN+ | input | Current-sense amplifier positive input; connect to the bus voltage side of the sense resistor for high-side applications or to the load side for low-side applications, with input pin voltage range GND - 0.2 V to 40 V. |
| 4 | IN- | input | Current-sense amplifier negative input; connect to the load side of the sense resistor for high-side applications or to the ground side for low-side applications, with input pin voltage range GND - 0.2 V to 40 V. |
| 5 | NC | unconnected | Not internally connected; float these pins or connect to any voltage between GND and VS. |
| 6 | VS | power_in | Power supply input, operating supply voltage 1.7 V to 5.5 V. |
| 7 | ENABLE | input | Digital enable input that must be driven externally or connected to VS if not used; driving it to VS turns the device on, while driving it to GND turns it off, reducing supply current and placing the output in high impedance, with ENABLE absolute maximum of GND - 0.3 V to 6 V. |
| 8 | REF | input | Reference input that enables bidirectional current sensing with an externally applied voltage within the range GND to VS. |
| 9 | GND | power_in | Analog ground. |
| 10 | OUT | output | Analog voltage output equal to the gained-up voltage difference from IN+ to IN-, offset by the voltage applied to the REF pin. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | UQFN-10(1.4x1.8) |
| Category | Amplifiers |
| Pins | 10 |
CAD (KiCad official)
- Symbol:
INA190A1IRSWT - Footprint:
Package_DFN_QFN:UQFN-10_1.4x1.8mm_P0.4mm - 3D model: UQFN-10(1.4x1.8) (KiCad packages3D, STEP)
- 3D model files:
ina190a1irswt-etched.step/ina190a1irswt-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);ina190a1irswt.step/ina190a1irswt.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (45 pp, sha256
1a17f09a74053f80, retrieved 2026-11-02, tier: manufacturer) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).