main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs ina190a1iddfr: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
viewers ina190a1iddfr: viewers · Ray
ina190a1iddfr-etched.fit.json ina190a1iddfr: one-pass backfill (re-etched, hero rebuilt in-pass (inputs changed)) · Ray
ina190a1iddfr-etched.glb ina190a1iddfr: one-pass backfill (re-etched, hero rebuilt in-pass (inputs changed)) · Ray
ina190a1iddfr-etched.step ina190a1iddfr: one-pass backfill (re-etched, hero rebuilt in-pass (inputs changed)) · Ray
ina190a1iddfr-hero.glb ina190a1iddfr: hero from the plain model · Ray
ina190a1iddfr-hero.overlay.json ina190a1iddfr: hero from the plain model · Ray
ina190a1iddfr.glb Publish 0.1.0 · Ray
ina190a1iddfr.kicad_mod Publish 0.1.0 · Ray
ina190a1iddfr.kicad_sym Publish 0.1.0 · Ray
ina190a1iddfr.lbr Publish 0.1.0 · Ray
ina190a1iddfr.step Publish 0.1.0 · Ray
package.json Publish 0.1.1 · Ray
page.json Publish 0.1.1 · Ray
README.md ina190a1iddfr: specified limits as data (metadata.characteristics, 35 rows from the datasheet) · Ray

INA190A1IDDFR

Texas Instruments · Current Sense Amplifiers · TSOT-23-8

INA190A1IDDFR from Texas Instruments, in a TSOT-23-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 VS power_in Power supply input, 1.7 V to 5.5 V
2 ENABLE input Digital input; driven to VS enables device operation, driven to GND disables and tristates output
3 REF input Reference input voltage that enables bidirectional current sensing and offsets output voltage
4 GND power_in Analog ground reference
5 OUT output Analog output voltage equal to (IN+ − IN−) × gain + VREF
6 NC unconnected Not internally connected; may float or connect to any voltage between GND and VS
7 IN+ input Positive input for current-sense amplifier; for high-side applications connect to bus voltage side of sense resistor, for low-side connect to load side
8 IN- input Negative input for current-sense amplifier; for high-side applications connect to load side of sense resistor, for low-side connect to ground side

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package TSOT-23-8
Category Amplifiers/Comparators
Pins 8

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Common-mode rejection ratio CMRR 132 150 dB VSENSE = 0 mV, VIN+ = –0.1 V to 40 V, TA = –40°C to +125°C 5
Offset voltage, RTI VOS -15 -3 15 µV VS = 1.8 V, VSENSE = 0 mV 5
Offset drift, RTI dVOS/dT 10 80 nV/°C VSENSE = 0 mV, TA = –40°C to +125°C 5
Power-supply rejection ratio, RTI PSRR -5 -1 5 µV/V VSENSE = 0 mV, VS = 1.7 V to 5.5 V 5
Input bias current IIB 0.5 3 nA VSENSE = 0 mV 5
Input offset current IIO -0.07 0.07 nA VSENSE = 0 mV 5
Gain error, A1 devices EG -0.2 -0.04 0.2 % VOUT = 0.1 V to VS – 0.1 V 5
Gain error drift 2 7 ppm/°C TA = –40°C to +125°C 5
Nonlinearity error -0.01 0.01 % VOUT = 0.1 V to VS – 0.1 V 5
Reference voltage rejection ratio, A1 devices RVRR -10 10 µV/V VREF = 100 mV to VS – 100 mV, TA = –40°C to +125°C 5
Maximum capacitive load 1 nF No sustained oscillation 5
Leakage input current (ENABLE) IEN 1 100 nA 0 V ≤ VENABLE ≤ VS 6
High-level input voltage (ENABLE) VIH 6 V Printed minimum is 0.7 × VS 6
Low-level input voltage (ENABLE) VIL 0 V Printed maximum is 0.3 × VS 6
Output leakage, disabled IODIS 1 5 µA VS = 5.0 V, VOUT = 0 V to 5.0 V, VENABLE = 0 V 6
Quiescent current IQ 48 65 µA VS = 1.8 V, VSENSE = 0 mV 6
Quiescent current over temperature IQ 90 µA VS = 1.8 V, VSENSE = 0 mV, TA = –40°C to +125°C 6
Quiescent current, disabled IQDIS 10 100 nA VENABLE = 0 V, VSENSE = 0 mV 6
Supply voltage VS 6 V 4
Differential input voltage VIN+, VIN– -42 42 V Differential (VIN+) – (VIN–) 4
Analog input voltage with respect to GND VIN+, VIN– 42 V With respect to GND; printed minimum is GND – 0.3 4
ENABLE pin voltage VENABLE 6 V Printed minimum is GND – 0.3 4
Input current into any pin 5 mA 4
Operating temperature TA -55 150 °C Over operating free-air temperature range 4
Junction temperature TJ 150 °C 4
Storage temperature Tstg -65 150 °C 4
Common-mode input range VCM 40 V Printed minimum is GND – 0.2 4
Input pin voltage range VIN+, VIN– 40 V Printed minimum is GND – 0.2 4
Operating supply voltage VS 1.7 5.5 V 4
Operating free-air temperature TA -40 125 °C 4
Junction-to-ambient thermal resistance, DDF (SOT-23) RθJA 170.7 °C/W 4
Junction-to-case (top) thermal resistance, DDF (SOT-23) RθJC(top) 132.7 °C/W 4
Junction-to-board thermal resistance, DDF (SOT-23) RθJB 65.3 °C/W 4
Junction-to-top characterization parameter, DDF (SOT-23) ΨJT 45.7 °C/W 4
Junction-to-board characterization parameter, DDF (SOT-23) ΨJB 65.2 °C/W 4

CAD (KiCad official)

  • Symbol: INA190A1IDDFR
  • Footprint: Package_TO_SOT_SMD:TSOT-23-8
  • 3D model: TSOT-23-8 (KiCad packages3D, STEP)
  • 3D model files: ina190a1iddfr-etched.step / ina190a1iddfr-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); ina190a1iddfr.step / ina190a1iddfr.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (47 pp, sha256 38a7102701707c17, retrieved 2026-09-24, tier: lcsc)
  • Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
  • Extractor: parts-factory 2.0.0 / extract_pins 0.2, primary claude-haiku-4-5-20251001 (text), consensus claude-sonnet-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF