main
Ray
Publish 0.1.0
dc832f5
INA186A5IDDFR
Texas Instruments · Current Sense Amplifiers · TSOT-23-8
INA186A5IDDFR from Texas Instruments, in a TSOT-23-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VS | power_in | Analog power supply, 1.7 V to 5.5 V. |
| 2 | ENABLE | input | Enable pin: driven to VS the device is on and functions as a current sense amplifier; driven to GND the device is off, supply current is reduced and OUT is high-impedance; must be driven externally or connected to VS if not used. |
| 3 | REF | input | Reference input that enables bidirectional current sensing with an externally applied voltage; devices without a REF pin have the REF node grounded internally. |
| 4 | GND | power_in | Analog ground. |
| 5 | OUT | output | Analog voltage output equal to the gained-up voltage difference from IN+ to IN-, offset by the voltage applied to the REF pin. |
| 6 | NC | unconnected | No internal connection; can be left floating, grounded, or connected to supply. |
| 7 | IN+ | input | Current-sense amplifier positive input; for high-side use connect to the bus voltage side of the sense resistor, for low-side use connect to the load side. |
| 8 | IN- | input | Current-sense amplifier negative input; for high-side use connect to the load side of the sense resistor, for low-side use connect to the ground side. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | TSOT-23-8 |
| Category | Amplifiers/Comparators |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Common-mode rejection ratio | CMRR | 120 | 150 | dB | VSENSE = 0 mV, VIN+ = -0.1 V to 40 V, TA = -40°C to +125°C | 5 | |
| Offset voltage, RTI | VOS | -3 | 50 | µV | VS = 1.8 V, VSENSE = 0 mV | 5 | |
| Offset drift, RTI | dVOS/dT | 0.05 | 0.5 | µV/°C | VSENSE = 0 mV, TA = -40°C to +125°C | 5 | |
| Power-supply rejection ratio, RTI | PSRR | -1 | 10 | µV/V | VSENSE = 0 mV, VS = 1.7 V to 5.5 V | 5 | |
| Input bias current | IIB | 0.5 | 3 | nA | VSENSE = 0 mV | 5 | |
| Input offset current | IIO | -0.07 | 0.07 | nA | VSENSE = 0 mV | 5 | |
| Gain (A5 devices) | G | 500 | V/V | A5 devices | 5 | ||
| Gain error | EG | -1 | -0.04 | 1 | % | VOUT = 0.1 V to VS - 0.1 V | 5 |
| Gain error drift | 2 | 10 | ppm/°C | TA = -40°C to +125°C | 5 | ||
| Nonlinearity error | -0.01 | 0.01 | % | VOUT = 0.1 V to VS - 0.1 V | 5 | ||
| Reference voltage rejection ratio | RVRR | -10 | 10 | µV/V | VREF = 100 mV to VS - 100 mV, TA = -40°C to +125°C | 5 | |
| Maximum capacitive load | 1 | nF | No sustained oscillation | 5 | |||
| Swing to GND | VSN | 0.05 | 1 | mV | VS = 1.8 V, RL = 10 kΩ to GND, TA = -40°C to +125°C, VSENSE = -10 mV, VREF = 0 V | 5 | |
| Zero current output voltage | VZL | 2 | 10 | mV | VS = 1.8 V, RL = 10 kΩ to GND, TA = -40°C to +125°C, VSENSE = 0 mV, VREF = 0 V | 5 | |
| Leakage input current | IEN | 1 | 100 | nA | 0 V ≤ VENABLE ≤ VS | 5 | |
| Low-level input voltage (DDF package) | VIL | 0 | V | DDF Package | 5 | ||
| Output leakage disabled | IODIS | 1 | 5 | µA | VS = 5.0 V, VOUT = 0 V to 5.0 V, VENABLE = 0 V | 5 | |
| Quiescent current | IQ | 48 | 65 | µA | VS = 1.8 V, VSENSE = 0 mV | 5 | |
| Quiescent current over temperature | IQ | 90 | µA | VS = 1.8 V, VSENSE = 0 mV, TA = -40°C to +125°C | 5 | ||
| Quiescent current disabled | IQDIS | 10 | 100 | nA | VENABLE = 0 V, VSENSE = 0 mV | 6 | |
| Differential input voltage | VIN | -42 | 42 | V | Differential (VIN+) - (VIN-) | 4 | |
| Analog input voltage with respect to GND | VIN+, VIN- | -0.3 | 42 | V | with respect to GND | 4 | |
| ENABLE pin voltage | VENABLE | -0.3 | 6 | V | with respect to GND | 4 | |
| Input current into any pin | 5 | mA | 4 | ||||
| Supply voltage | VS | 6 | V | 4 | |||
| Operating temperature (absolute maximum) | TA | -55 | 150 | °C | 4 | ||
| Junction temperature | TJ | 150 | °C | 4 | |||
| Storage temperature | Tstg | -65 | 150 | °C | 4 | ||
| ESD human-body model | V(ESD) | -3000 | 3000 | V | HBM, per ANSI/ESDA/JEDEC JS-001 | 4 | |
| ESD charged-device model | V(ESD) | -1000 | 1000 | V | CDM, per JEDEC JESD22-C101 | 4 | |
| Common-mode input range | VCM | -0.2 | 40 | V | relative to GND | 4 | |
| Operating supply voltage | VS | 1.7 | 5.5 | V | 4 | ||
| Operating free-air temperature | TA | -40 | 125 | °C | 4 | ||
| Junction-to-ambient thermal resistance | RθJA | 137.2 | °C/W | DDF (SOT23) 8 pins | 4 | ||
| Junction-to-case (top) thermal resistance | RθJC(top) | 38.4 | °C/W | DDF (SOT23) 8 pins | 4 | ||
| Junction-to-board thermal resistance | RθJB | 57.1 | °C/W | DDF (SOT23) 8 pins | 4 | ||
| Junction-to-top characterization parameter | ΨJT | 5.1 | °C/W | DDF (SOT23) 8 pins | 4 | ||
| Junction-to-board characterization parameter | ΨJB | 56.6 | °C/W | DDF (SOT23) 8 pins | 4 |
CAD (KiCad official)
- Symbol:
INA186A5IDDFR - Footprint:
Package_TO_SOT_SMD:TSOT-23-8 - 3D model: TSOT-23-8 (KiCad packages3D, STEP)
- 3D model files:
ina186a5iddfr-etched.step/ina186a5iddfr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);ina186a5iddfr.step/ina186a5iddfr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (45 pp, sha256
9b6f07521db2cf0a, retrieved 2026-11-05, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# INA186A5IDDFR
**Texas Instruments** · Current Sense Amplifiers · TSOT-23-8
INA186A5IDDFR from Texas Instruments, in a TSOT-23-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VS | power_in | Analog power supply, 1.7 V to 5.5 V. |
| 2 | ENABLE | input | Enable pin: driven to VS the device is on and functions as a current sense amplifier; driven to GND the device is off, supply current is reduced and OUT is high-impedance; must be driven externally or connected to VS if not used. |
| 3 | REF | input | Reference input that enables bidirectional current sensing with an externally applied voltage; devices without a REF pin have the REF node grounded internally. |
| 4 | GND | power_in | Analog ground. |
| 5 | OUT | output | Analog voltage output equal to the gained-up voltage difference from IN+ to IN-, offset by the voltage applied to the REF pin. |
| 6 | NC | unconnected | No internal connection; can be left floating, grounded, or connected to supply. |
| 7 | IN+ | input | Current-sense amplifier positive input; for high-side use connect to the bus voltage side of the sense resistor, for low-side use connect to the load side. |
| 8 | IN- | input | Current-sense amplifier negative input; for high-side use connect to the load side of the sense resistor, for low-side use connect to the ground side. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | TSOT-23-8 |
| Category | Amplifiers/Comparators |
| Pins | 8 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Common-mode rejection ratio | CMRR | 120 | 150 | | dB | VSENSE = 0 mV, VIN+ = -0.1 V to 40 V, TA = -40°C to +125°C | 5 |
| Offset voltage, RTI | VOS | -3 | | 50 | µV | VS = 1.8 V, VSENSE = 0 mV | 5 |
| Offset drift, RTI | dVOS/dT | | 0.05 | 0.5 | µV/°C | VSENSE = 0 mV, TA = -40°C to +125°C | 5 |
| Power-supply rejection ratio, RTI | PSRR | -1 | | 10 | µV/V | VSENSE = 0 mV, VS = 1.7 V to 5.5 V | 5 |
| Input bias current | IIB | | 0.5 | 3 | nA | VSENSE = 0 mV | 5 |
| Input offset current | IIO | -0.07 | | 0.07 | nA | VSENSE = 0 mV | 5 |
| Gain (A5 devices) | G | | 500 | | V/V | A5 devices | 5 |
| Gain error | EG | -1 | -0.04 | 1 | % | VOUT = 0.1 V to VS - 0.1 V | 5 |
| Gain error drift | | | 2 | 10 | ppm/°C | TA = -40°C to +125°C | 5 |
| Nonlinearity error | | -0.01 | | 0.01 | % | VOUT = 0.1 V to VS - 0.1 V | 5 |
| Reference voltage rejection ratio | RVRR | -10 | | 10 | µV/V | VREF = 100 mV to VS - 100 mV, TA = -40°C to +125°C | 5 |
| Maximum capacitive load | | | | 1 | nF | No sustained oscillation | 5 |
| Swing to GND | VSN | | 0.05 | 1 | mV | VS = 1.8 V, RL = 10 kΩ to GND, TA = -40°C to +125°C, VSENSE = -10 mV, VREF = 0 V | 5 |
| Zero current output voltage | VZL | | 2 | 10 | mV | VS = 1.8 V, RL = 10 kΩ to GND, TA = -40°C to +125°C, VSENSE = 0 mV, VREF = 0 V | 5 |
| Leakage input current | IEN | | 1 | 100 | nA | 0 V ≤ VENABLE ≤ VS | 5 |
| Low-level input voltage (DDF package) | VIL | 0 | | | V | DDF Package | 5 |
| Output leakage disabled | IODIS | | 1 | 5 | µA | VS = 5.0 V, VOUT = 0 V to 5.0 V, VENABLE = 0 V | 5 |
| Quiescent current | IQ | | 48 | 65 | µA | VS = 1.8 V, VSENSE = 0 mV | 5 |
| Quiescent current over temperature | IQ | | | 90 | µA | VS = 1.8 V, VSENSE = 0 mV, TA = -40°C to +125°C | 5 |
| Quiescent current disabled | IQDIS | | 10 | 100 | nA | VENABLE = 0 V, VSENSE = 0 mV | 6 |
| Differential input voltage | VIN | -42 | | 42 | V | Differential (VIN+) - (VIN-) | 4 |
| Analog input voltage with respect to GND | VIN+, VIN- | -0.3 | | 42 | V | with respect to GND | 4 |
| ENABLE pin voltage | VENABLE | -0.3 | | 6 | V | with respect to GND | 4 |
| Input current into any pin | | | | 5 | mA | | 4 |
| Supply voltage | VS | | | 6 | V | | 4 |
| Operating temperature (absolute maximum) | TA | -55 | | 150 | °C | | 4 |
| Junction temperature | TJ | | | 150 | °C | | 4 |
| Storage temperature | Tstg | -65 | | 150 | °C | | 4 |
| ESD human-body model | V(ESD) | -3000 | | 3000 | V | HBM, per ANSI/ESDA/JEDEC JS-001 | 4 |
| ESD charged-device model | V(ESD) | -1000 | | 1000 | V | CDM, per JEDEC JESD22-C101 | 4 |
| Common-mode input range | VCM | -0.2 | | 40 | V | relative to GND | 4 |
| Operating supply voltage | VS | 1.7 | | 5.5 | V | | 4 |
| Operating free-air temperature | TA | -40 | | 125 | °C | | 4 |
| Junction-to-ambient thermal resistance | RθJA | | 137.2 | | °C/W | DDF (SOT23) 8 pins | 4 |
| Junction-to-case (top) thermal resistance | RθJC(top) | | 38.4 | | °C/W | DDF (SOT23) 8 pins | 4 |
| Junction-to-board thermal resistance | RθJB | | 57.1 | | °C/W | DDF (SOT23) 8 pins | 4 |
| Junction-to-top characterization parameter | ΨJT | | 5.1 | | °C/W | DDF (SOT23) 8 pins | 4 |
| Junction-to-board characterization parameter | ΨJB | | 56.6 | | °C/W | DDF (SOT23) 8 pins | 4 |
## CAD (KiCad official)
- Symbol: `INA186A5IDDFR`
- Footprint: `Package_TO_SOT_SMD:TSOT-23-8`
- 3D model: TSOT-23-8 (KiCad packages3D, STEP)
- 3D model files: `ina186a5iddfr-etched.step` / `ina186a5iddfr-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `ina186a5iddfr.step` / `ina186a5iddfr.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/lit/ds/symlink/ina186.pdf) (45 pp, sha256 `9b6f07521db2cf0a`, retrieved 2026-11-05, tier: manufacturer)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/ina186a5iddfr-datasheet.pdf)