Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

INA186A3IDCKR

Texas Instruments · Current Sense Amplifiers · SC-70-6

INA186A3IDCKR from Texas Instruments, in a SC-70-6. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 REF input Reference input for output voltage offset; enables bidirectional current detection via external applied voltage in DCK and DDF packages.
2 GND power_in Analog ground reference.
3 VS power_in Positive power supply voltage, 1.7 V to 5.5 V.
4 IN+ input Positive differential input of current sense amplifier; for high-side sensing connect to bus voltage side of sense resistor, for low-side connect to load side.
5 IN− input Negative differential input of current sense amplifier; for high-side sensing connect to load side of sense resistor, for low-side connect to ground side.
6 OUT output Analog output voltage representing gain-amplified differential voltage offset by VREF applied to REF pin.

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package SC-70-6
Category Amplifiers/Comparators
Pins 6

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
共模抑制比 (CMRR) CMRR 120 150 dB VSENSE = 0mV,VIN+ = –0.1V 至 40V,TA = –40°C 至 +125°C 5
失调电压,RTI (VOS) VOS -50 50 µV VS = 1.8V,VSENSE = 0mV 5
电源抑制比,RTI (PSRR) PSRR -10 10 µV/V VSENSE = 0mV,VS = 1.7V 至 5.5V 5
温漂,RTI (dVOS/dT) dVOS/dT 0.05 0.5 µV/°C VSENSE = 0V,TA = –40°C 至 +125°C 5
输入偏置电流 (IIB) IIB 0.5 3 nA VSENSE = 0mV 5
输入失调电流 (IIO) IIO -0.07 0.07 nA VSENSE = 0mV 5
增益误差 (EG) EG -1 -0.04 1 % VOUT = 0.1 V 至 VS – 0.1 V 5
增益误差漂移 2 10 ppm/°C TA=-40°C 至 +125°C 5
非线性误差 -0.01 0.01 % VOUT = 0.1 V 至 VS – 0.1 V 5
基准电压抑制比 (RVRR) RVRR -10 2 10 µV/V VREF = 100mV 至 VS – 100mV,TA = –40°C 至 +125°C 5
最大容性负载 1 nF 无持续振荡 5
输出摆幅,相对于 VS 电源轨 (VSP) VSP -20 -40 mV VS = 1.8V,RL = 10kΩ 至 GND,TA = –40°C 至 +125°C;数值为相对 VS 的偏移 5
输出摆幅,到 GND (VSN) VSN 0.05 1 mV VS = 1.8V,RL = 10kΩ 至 GND,TA = –40°C 至 +125°C,VSENSE = –10mV,VREF = 0V;数值为相对 GND 的偏移 5
零电流输出电压 (VZL) VZL 2 10 mV VS = 1.8V,RL = 10kΩ 至 GND,TA = –40°C 至 +125°C,VSENSE = 0mV,VREF = 0V;数值为相对 GND 的偏移 5
静态电流 (IQ) IQ 48 65 µA VS = 1.8V,VSENSE = 0mV 6
静态电流 (IQ),全温度范围 IQ 90 µA VS = 1.8V,VSENSE = 0mV,TA = –40°C 至 +125°C 6
电源电压 VS VS 6 V 4
差分输入电压 (VIN+) – (VIN–) VIN+, VIN- -42 42 V 4
模拟输入,相对于 GND VIN+, VIN- -0.3 42 V 相对于 GND 4
REF、OUT 电压 REF, OUT -0.3 V 相对于 GND;上限为 (VS) + 0.3 V 4
进入任一引脚的输入电流 5 mA 4
工作温度 TA (绝对最大值) TA -55 150 °C 4
结温 TJ TJ 150 °C 4
存储温度 Tstg Tstg -65 150 °C 4
静电放电,人体放电模型 (HBM) V(ESD) -3000 3000 V HBM,ANSI/ESDA/JEDEC JS-001 4
静电放电,充电器件模型 (CDM) V(ESD) -1000 1000 V CDM,JEDEC JESD22-C101 4
共模输入范围 (VCM) VCM -0.2 40 V 4
输入引脚电压范围 (VIN+, VIN–) VIN+, VIN- -0.2 40 V 4
运行电源电压 VS VS 1.7 5.5 V 4
基准引脚电压范围 VREF VREF 0 V 上限为 VS 4
自然通风工作温度 TA TA -40 125 °C 4
结至环境热阻 RθJA (DCK) RθJA 170.7 °C/W DCK (SC70) 6 引脚 4
结至外壳(顶部)热阻 RθJC(top) (DCK) RθJC(top) 132.7 °C/W DCK (SC70) 6 引脚 4
结至电路板热阻 RθJB (DCK) RθJB 65.3 °C/W DCK (SC70) 6 引脚 4
结至顶部特征参数 ΨJT (DCK) ΨJT 45.7 °C/W DCK (SC70) 6 引脚 4
结至电路板特征参数 ΨJB (DCK) ΨJB 65.2 °C/W DCK (SC70) 6 引脚 4

CAD (KiCad official)

  • Symbol: INA186A3IDCKR
  • Footprint: Package_TO_SOT_SMD:SOT-363_SC-70-6
  • 3D model: SC-70-6 (KiCad packages3D, STEP)
  • 3D model files: ina186a3idckr-etched.step / ina186a3idckr-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); ina186a3idckr.step / ina186a3idckr.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (48 pp, sha256 c1bdab2e3ee3efb4, retrieved 2026-09-22, tier: lcsc)
  • Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
  • Extractor: parts-factory 2.0.0 / extract_pins 0.2, primary claude-haiku-4-5-20251001 (text), consensus claude-sonnet-4-6 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF