Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

INA186A2QDBVRQ1

Texas Instruments · Current Sense Amplifiers · SOT-23-5

INA186A2QDBVRQ1 from Texas Instruments, in a SOT-23-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 GND power_in Analog ground connection.
2 OUT output Analog output voltage providing the amplified gain voltage difference from IN+ to IN-, with offset determined by the voltage applied to REF pin.
3 VS power_in Power supply input with operating voltage range 1.7V to 5.5V.
4 IN- input Current sense amplifier negative input; for high-side sensing connects to load side of sense resistor, for low-side sensing connects to ground side of sense resistor.
5 IN+ input Current sense amplifier positive input; for high-side sensing connects to bus voltage side of sense resistor, for low-side sensing connects to load side of sense resistor.

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package SOT-23-5
Category Amplifiers/Comparators
Pins 5

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Supply voltage VS 6 V 4
Differential input voltage (VIN+) – (VIN–) -42 42 V 4
Analog input voltage to GND VIN+, VIN– 42 V 4
ENABLE voltage to GND VENABLE 6 V 4
Input current into any pin 5 mA 4
Operating temperature TA -55 150 °C 4
Junction temperature TJ 150 °C 4
Storage temperature Tstg -65 150 °C 4
Common-mode input voltage VCM 40 V 4
Input pin voltage range VIN+, VIN– 40 V 4
Operating supply voltage VS 1.7 5.5 V 4
Ambient operating temperature (natural convection) TA -40 125 °C 4
Common-mode rejection ratio CMRR 120 150 dB VSENSE = 0mV,VIN+ = –0.1V 至 40V,TA = –40°C 至 +125°C 5
Input offset voltage, RTI VOS -50 -3 50 µV VS = 1.8V,VSENSE = 0mV 5
Offset voltage drift, RTI dVOS/dT 0.05 0.5 µV/°C VSENSE = 0V,TA = –40°C 至 +125°C 5
Power-supply rejection ratio, RTI PSRR -10 -1 10 µV/V VSENSE = 0mV,VS = 1.7V 至 5.5V 5
Input bias current IIB 0.5 3 nA VSENSE = 0mV 5
Input offset current IIO -0.07 0.07 nA VSENSE = 0mV 5
Gain error EG -1 -0.04 1 % VOUT = 0.1 V 至 VS – 0.1 V 5
Gain error drift 2 10 ppm/°C TA=-40°C 至 +125°C 5
Nonlinearity error -0.01 0.01 % VOUT = 0.1 V 至 VS – 0.1 V 5
Reference voltage rejection ratio, RTI RVRR -10 2 10 µV/V VREF = 100mV 至 VS – 100mV,TA = –40°C 至 +125°C 5
Maximum capacitive load (no sustained oscillation) 1 nF 无持续振荡 5
Output swing to GND VSN 0.05 1 mV VS = 1.8V,RL = 10kΩ 至 GND,TA = –40°C 至 +125°C,VSENSE = –10mV,VREF = 0V 5
Zero-current output voltage VZL 2 10 mV VS = 1.8V,RL = 10kΩ 至 GND,TA = –40°C 至 +125°C,VSENSE = 0mV,VREF = 0V 5
ENABLE input leakage current IEN 1 100 nA 0V ≤ VENABLE ≤ VS 5
ENABLE high-level input voltage VIH 6 V 5
ENABLE low-level input voltage VIL 0 V 5
Output leakage when disabled IODIS 1 5 µA VS = 5.0V,VOUT = 0V 至 5.0V,VENABLE = 0V 5
Quiescent current IQ 48 65 µA VS = 1.8V,VSENSE = 0mV 5
Quiescent current over temperature IQ 90 µA VS = 1.8V,VSENSE = 0mV,TA = –40°C 至 +125°C 5
Quiescent current when disabled IQDIS 10 100 nA VENABLE = 0V,VSENSE = 0mV 6
Junction-to-ambient thermal resistance (DBV, 5-pin SOT-23) RθJA 176.3 °C/W DBV (SOT23) 5 引脚 4
Junction-to-case (top) thermal resistance (DBV) RθJC(top) 105.6 °C/W DBV (SOT23) 5 引脚 4
Junction-to-board thermal resistance (DBV) RθJB 66.4 °C/W DBV (SOT23) 5 引脚 4
Junction-to-top characterization parameter (DBV) ΨJT 43.9 °C/W DBV (SOT23) 5 引脚 4
Junction-to-board characterization parameter (DBV) ΨJB 66.1 °C/W DBV (SOT23) 5 引脚 4

CAD (KiCad official)

  • Symbol: INA186A2QDBVRQ1
  • Footprint: Package_TO_SOT_SMD:SOT-23-5
  • 3D model: SOT-23-5 (KiCad packages3D, STEP)
  • 3D model files: ina186a2qdbvrq1-etched.step / ina186a2qdbvrq1-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); ina186a2qdbvrq1.step / ina186a2qdbvrq1.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (45 pp, sha256 bf49559207ff65a8, retrieved 2026-09-24, tier: lcsc)
  • Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
  • Extractor: parts-factory 2.0.0 / extract_pins 0.2, primary claude-haiku-4-5-20251001 (text), consensus claude-sonnet-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF