Generated by kicad-footprint-generator · KiCad file format 20260206
INA186A2IDDFT
Texas Instruments · Current Sense Amplifiers · TSOT-23-8
INA186A2IDDFT from Texas Instruments, in a TSOT-23-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VS | power_in | Analog power supply voltage input; accepts 1.7 V to 5.5 V |
| 2 | ENABLE | input | Digital input enable pin; drive to VS to enable device and start current measurement, or drive to GND to disable and reduce quiescent current to 10nA; output enters high impedance state when disabled; must be externally driven or connected to VS if not used |
| 3 | REF | input | Analog reference input for bidirectional current sensing; externally applied voltage sets output offset for two-direction current measurement; connect to GND for unidirectional measurement or to VS/2 for bidirectional measurement |
| 4 | GND | power_in | Analog ground reference |
| 5 | OUT | output | Analog voltage output; provides amplified voltage difference from IN+ to IN- added to REF offset voltage; output swings from GND + 1mV to VS - 40mV |
| 6 | NC | unconnected | No internal connection; can be left floating, grounded, or connected to power supply |
| 7 | IN+ | input | Current sense amplifier positive input; for high-side applications connect to bus voltage side of sense resistor; for low-side applications connect to load side of sense resistor; accepts common-mode voltage from -0.2 V to +40 V |
| 8 | IN- | input | Current sense amplifier negative input; for high-side applications connect to load side of sense resistor; for low-side applications connect to ground side of sense resistor; accepts common-mode voltage from -0.2 V to +40 V |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | TSOT-23-8 |
| Category | Amplifiers/Comparators |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply voltage (absolute maximum) | VS | 6 | V | 4 | |||
| Differential input voltage (VIN+) – (VIN–) | VIN+, VIN– | -42 | 42 | V | 4 | ||
| Input voltage relative to GND | VIN+, VIN– | 42 | V | 4 | |||
| ENABLE pin voltage (absolute maximum) | VENABLE | 6 | V | 4 | |||
| Input current into any pin | 5 | mA | 4 | ||||
| Operating temperature (absolute maximum) | TA | -55 | 150 | °C | 4 | ||
| Junction temperature | TJ | 150 | °C | 4 | |||
| Storage temperature | Tstg | -65 | 150 | °C | 4 | ||
| Common-mode input range | VCM | 40 | V | 4 | |||
| Input pin voltage range | VIN+, VIN– | 40 | V | 4 | |||
| Operating supply voltage | VS | 1.7 | 5.5 | V | 4 | ||
| Operating temperature (natural ventilation) | TA | -40 | 125 | °C | 4 | ||
| Junction-to-ambient thermal resistance (DDF) | RθJA | 137.2 | °C/W | 4 | |||
| Junction-to-case (top) thermal resistance (DDF) | RθJC(top) | 38.4 | °C/W | 4 | |||
| Junction-to-board thermal resistance (DDF) | RθJB | 57.1 | °C/W | 4 | |||
| Junction-to-top characterization parameter (DDF) | ΨJT | 5.1 | °C/W | 4 | |||
| Junction-to-board characterization parameter (DDF) | ΨJB | 56.6 | °C/W | 4 | |||
| Common-mode rejection ratio | CMRR | 120 | 150 | dB | VSENSE = 0mV,VIN+ = –0.1V 至 40V,TA = –40°C 至 +125°C | 5 | |
| Input offset voltage, RTI | VOS | -50 | -3 | 50 | µV | VS = 1.8V,VSENSE = 0mV | 5 |
| Offset voltage drift, RTI | dVOS/dT | 0.05 | 0.5 | µV/°C | VSENSE = 0V,TA = –40°C 至 +125°C | 5 | |
| Power-supply rejection ratio, RTI | PSRR | -10 | -1 | 10 | µV/V | VSENSE = 0mV,VS = 1.7V 至 5.5V | 5 |
| Input bias current | IIB | 0.5 | 3 | nA | VSENSE = 0mV | 5 | |
| Input offset current | IIO | -0.07 | 0.07 | nA | VSENSE = 0mV | 5 | |
| Gain error | EG | -1 | -0.04 | 1 | % | VOUT = 0.1 V 至 VS – 0.1 V | 5 |
| Gain error drift | 2 | 10 | ppm/°C | TA=-40°C 至 +125°C | 5 | ||
| Nonlinearity error | -0.01 | 0.01 | % | VOUT = 0.1 V 至 VS – 0.1 V | 5 | ||
| Reference voltage rejection ratio | RVRR | -10 | 10 | µV/V | VREF = 100mV 至 VS – 100mV,TA = –40°C 至 +125°C | 5 | |
| Maximum capacitive load | 1 | nF | 无持续振荡 | 5 | |||
| Output swing to GND (VSN, relative to GND) | VSN | 0.05 | 1 | mV | VS = 1.8V,RL = 10kΩ 至 GND,TA = –40°C 至 +125°C,VSENSE = –10mV,VREF = 0V | 5 | |
| Zero-current output voltage (relative to GND) | VZL | 2 | 10 | mV | VS = 1.8V,RL = 10kΩ 至 GND,TA = –40°C 至 +125°C,VSENSE = 0mV,VREF = 0V | 5 | |
| Input leakage current, ENABLE | IEN | 1 | 100 | nA | 0V ≤ VENABLE ≤ VS | 5 | |
| High-level input voltage, ENABLE (DDF) | VIH | 6 | V | DDF 封装 | 5 | ||
| Low-level input voltage, ENABLE (DDF) | VIL | 0 | V | DDF 封装 | 5 | ||
| ENABLE hysteresis (DDF) | VHYS | 300 | mV | DDF 封装 | 5 | ||
| Output leakage when disabled | IODIS | 1 | 5 | µA | VS = 5.0V,VOUT = 0V 至 5.0V,VENABLE = 0V | 5 | |
| Quiescent current | IQ | 48 | 65 | µA | VS = 1.8V,VSENSE = 0mV | 6 | |
| Quiescent current over temperature | IQ | 90 | µA | VS = 1.8V,VSENSE = 0mV,TA = –40°C 至 +125°C | 6 | ||
| Quiescent current, disabled | IQDIS | 10 | 100 | nA | VENABLE = 0V,VSENSE = 0mV | 6 | |
| Gain (A2 device) | G | 50 | V/V | 5 | |||
| Bandwidth (A2 device) | BW | 37 | kHz | A2 器件,CLOAD = 10pF | 5 | ||
| Slew rate | SR | 0.3 | V/µs | VS = 5.0V,VOUT = 0.5V 至 4.5V | 5 | ||
| Settling time | tS | 30 | µs | 从电流阶跃到最终值的 1% 以内 | 5 | ||
| Voltage noise density, RTI | 75 | nV/√Hz | 5 |
CAD (KiCad official)
- Symbol:
INA186A2IDDFT - Footprint:
Package_TO_SOT_SMD:TSOT-23-8 - 3D model: TSOT-23-8 (KiCad packages3D, STEP)
- 3D model files:
ina186a2iddft-etched.step/ina186a2iddft-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);ina186a2iddft.step/ina186a2iddft.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (48 pp, sha256
c1bdab2e3ee3efb4, retrieved 2026-10-07, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-4-5-20251001(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).