main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs ina186a2idckt: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
viewers ina186a2idckt: viewers · Ray
ina186a2idckt-etched.fit.json ina186a2idckt: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
ina186a2idckt-etched.glb ina186a2idckt: white body in tscircuit (pre-1.8 etch structure under an assembly instance); Ray 2026-10-19: black IC bo… · Ray
ina186a2idckt-etched.step ina186a2idckt: white body in tscircuit (pre-1.8 etch structure under an assembly instance); Ray 2026-10-19: black IC bo… · Ray
ina186a2idckt-hero.glb ina186a2idckt: hero from the plain model · Ray
ina186a2idckt-hero.overlay.json ina186a2idckt: hero from the plain model · Ray
ina186a2idckt.glb Publish 0.1.0 · Ray
ina186a2idckt.kicad_mod Publish 0.1.0 · Ray
ina186a2idckt.kicad_sym Publish 0.1.0 · Ray
ina186a2idckt.lbr Publish 0.1.0 · Ray
ina186a2idckt.step Publish 0.1.0 · Ray
package.json Publish 0.1.1 · Ray
page.json Publish 0.1.1 · Ray
README.md ina186a2idckt: specified limits as data (metadata.characteristics, 28 rows from the datasheet) · Ray

INA186A2IDCKT

Texas Instruments · Current Sense Amplifiers · SC-70-6

INA186A2IDCKT from Texas Instruments, in a SC-70-6. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 REF input Reference input for bidirectional current detection via externally applied voltage; available only in DCK and DDF packages, internally grounded in devices without REF pin
2 GND power_in Analog ground
3 VS power_in Supply voltage, 1.7 V to 5.5 V
4 IN+ input Positive input of current sensing amplifier; for high-side sensing connect to bus voltage side of sense resistor, for low-side sensing connect to load side
5 IN- input Negative input of current sensing amplifier; for high-side sensing connect to load side of sense resistor, for low-side sensing connect to ground side
6 OUT output Analog voltage output that is the gain-amplified voltage difference from IN+ to IN- pin, offset by voltage applied to REF pin

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package SC-70-6
Category Amplifiers/Comparators
Pins 6

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
共模抑制比 CMRR CMRR 120 150 dB VSENSE = 0mV,VIN+ = –0.1V 至 40V,TA = –40°C 至 +125°C 5
失调电压 VOS (RTI) VOS -50 -3 50 µV VS = 1.8V,VSENSE = 0mV 5
温漂 dVOS/dT (RTI) dVOS/dT 0.05 0.5 µV/°C VSENSE = 0V,TA = –40°C 至 +125°C 5
电源抑制比 PSRR (RTI) PSRR -10 -1 10 µV/V VSENSE = 0mV,VS = 1.7V 至 5.5V 5
输入偏置电流 IIB IIB 0.5 3 nA VSENSE = 0mV 5
输入失调电流 IIO IIO -0.07 0.07 nA VSENSE = 0mV 5
增益误差 EG EG -1 -0.04 1 % VOUT = 0.1 V 至 VS – 0.1 V 5
增益误差漂移 2 10 ppm/°C TA=-40°C 至 +125°C 5
非线性误差 -0.01 0.01 % VOUT = 0.1 V 至 VS – 0.1 V 5
基准电压抑制比 RVRR RVRR -10 2 10 µV/V VREF = 100mV 至 VS – 100mV,TA = –40°C 至 +125°C 5
最大容性负载 1 nF 无持续振荡 5
静态电流 IQ IQ 48 65 µA VS = 1.8V,VSENSE = 0mV 6
静态电流 IQ (全温度范围) IQ 90 µA VS = 1.8V,VSENSE = 0mV,TA = –40°C 至 +125°C 6
绝对最大 电源电压 VS VS 6 V 4
绝对最大 差分输入电压 (VIN+) – (VIN–) VIN+, VIN– -42 42 V 4
绝对最大 模拟输入电压 相对于 GND VIN+, VIN– 42 V 4
绝对最大 进入任一引脚的输入电流 5 mA 4
绝对最大 工作温度 TA TA -55 150 °C 4
绝对最大 结温 TJ TJ 150 °C 4
绝对最大 存储温度 Tstg -65 150 °C 4
建议运行 共模输入范围 VCM VCM 40 V 4
建议运行 运行电源电压 VS VS 1.7 5.5 V 4
建议运行 自然通风工作温度 TA TA -40 125 °C 4
结至环境热阻 RθJA (DCK) RθJA 170.7 °C/W 4
结至外壳(顶部)热阻 RθJC(top) (DCK) RθJC(top) 132.7 °C/W 4
结至电路板热阻 RθJB (DCK) RθJB 65.3 °C/W 4
结至顶部特征参数 ΨJT (DCK) ΨJT 45.7 °C/W 4
结至电路板特征参数 ΨJB (DCK) ΨJB 65.2 °C/W 4

CAD (KiCad official)

  • Symbol: INA186A2IDCKT
  • Footprint: Package_TO_SOT_SMD:SOT-363_SC-70-6
  • 3D model: SC-70-6 (KiCad packages3D, STEP)
  • 3D model files: ina186a2idckt-etched.step / ina186a2idckt-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); ina186a2idckt.step / ina186a2idckt.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (48 pp, sha256 c1bdab2e3ee3efb4, retrieved 2026-09-26, tier: lcsc)
  • Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
  • Extractor: parts-factory 2.0.0 / extract_pins 0.2, primary claude-haiku-4-5-20251001 (text), consensus claude-sonnet-4-6 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF