main
Ray
Publish 0.1.0
01cc62d
INA186A1QDBVRQ1
Texas Instruments · Current Sense Amplifiers · SOT-23-5
INA186A1QDBVRQ1 from Texas Instruments, in a SOT-23-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | GND | power_in | Analog ground and device reference; on the DBV package the REF node is connected internally to GND. |
| 2 | OUT | output | Analog output voltage equal to the gain times the differential input voltage from IN+ to IN-, offset by the voltage applied at REF; the specified swing is VS - 40 mV maximum to the positive rail and GND + 1 mV maximum to ground. |
| 3 | VS | power_in | Power supply, 1.7 V to 5.5 V. |
| 4 | IN- | input | Current-sense amplifier negative input; connect to the load side of the sense resistor for high-side sensing or to the ground side for low-side sensing. |
| 5 | IN+ | input | Current-sense amplifier positive input; connect to the bus-voltage side of the sense resistor for high-side sensing or to the load side for low-side sensing. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | SOT-23-5 |
| Category | Amplifiers/Comparators |
| Pins | 5 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Common-mode rejection ratio | CMRR | 120 | 150 | dB | VSENSE = 0mV,VIN+ = -0.1V 至 40V,TA = -40°C 至 +125°C | 5 | |
| Input offset voltage, RTI | VOS | -50 | -3 | 50 | µV | VS = 1.8V,VSENSE = 0mV | 5 |
| Offset drift, RTI | dVOS/dT | 0.05 | 0.5 | µV/°C | VSENSE = 0V,TA = -40°C 至 +125°C | 5 | |
| Power-supply rejection ratio, RTI | PSRR | -10 | -1 | 10 | µV/V | VSENSE = 0mV,VS = 1.7V 至 5.5V | 5 |
| Input bias current | IIB | 0.5 | 3 | nA | VSENSE = 0mV | 5 | |
| Gain error | EG | -1 | -0.04 | 1 | % | VOUT = 0.1 V 至 VS, 0.1 V | 5 |
| Gain error drift | 2 | 10 | ppm/°C | TA=-40°C 至 +125°C | 5 | ||
| Reference voltage rejection ratio, RTI | RVRR | -10 | 2 | 10 | µV/V | VREF = 100mV 至 VS, 100mV,TA = -40°C 至 +125°C | 5 |
| Swing to GND | VSN | 0.05 | 1 | mV | VS = 1.8V,RL = 10kΩ 至 GND,TA = -40°C 至 +125°C,VSENSE = -10mV,VREF = 0V | 5 | |
| Zero-current output voltage | VZL | 2 | 10 | mV | VS = 1.8V,RL = 10kΩ 至 GND,TA = -40°C 至 +125°C,VSENSE = 0mV,VREF = 0V | 5 | |
| Maximum capacitive load | 1 | nF | 无持续振荡 | 5 | |||
| Quiescent current | IQ | 48 | 65 | µA | VS = 1.8V,VSENSE = 0mV | 5 | |
| Quiescent current over temperature | IQ | 90 | µA | VS = 1.8V,VSENSE = 0mV,TA = -40°C 至 +125°C | 5 | ||
| Supply voltage | VS | 6 | V | 4 | |||
| Differential input voltage | VIN | -42 | 42 | V | (VIN+), (VIN-) | 4 | |
| Analog input voltage to GND | VIN+, VIN- | -0.3 | 42 | V | VIN+、VIN-,相对于 GND;printed min GND, 0.3 | 4 | |
| REF and OUT voltage to GND | REF, OUT | -0.3 | V | 相对于 GND;printed max (VS) + 0.3 V | 4 | ||
| Input current into any pin | 5 | mA | 进入任一引脚的输入电流 | 4 | |||
| Operating temperature (absolute) | TA | -55 | 150 | °C | 工作温度 | 4 | |
| Junction temperature | TJ | 150 | °C | 结温 | 4 | ||
| Storage temperature | Tstg | -65 | 150 | °C | 存储温度 | 4 | |
| Common-mode input range | VCM | -0.2 | 40 | V | 共模输入范围 | 4 | |
| Input pin voltage range | VIN+, VIN- | -0.2 | 40 | V | 输入引脚电压范围 | 4 | |
| Operating supply voltage | VS | 1.7 | 5.5 | V | 运行电源电压 | 4 | |
| Operating ambient temperature | TA | -40 | 125 | °C | 自然通风工作温度 | 4 | |
| Junction-to-ambient thermal resistance | RqJA | 176.3 | °C/W | DBV (SOT23) 5 引脚 | 4 | ||
| Junction-to-case (top) thermal resistance | RqJC(top) | 105.6 | °C/W | DBV (SOT23) 5 引脚 | 4 | ||
| Junction-to-board thermal resistance | RqJB | 66.4 | °C/W | DBV (SOT23) 5 引脚 | 4 | ||
| Junction-to-top characterization parameter | YJT | 43.9 | °C/W | DBV (SOT23) 5 引脚 | 4 | ||
| Junction-to-board characterization parameter | YJB | 66.1 | °C/W | DBV (SOT23) 5 引脚 | 4 |
CAD (KiCad official)
- Symbol:
INA186A1QDBVRQ1 - Footprint:
Package_TO_SOT_SMD:SOT-23-5 - 3D model: SOT-23-5 (KiCad packages3D, STEP)
- 3D model files:
ina186a1qdbvrq1-etched.step/ina186a1qdbvrq1-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);ina186a1qdbvrq1.step/ina186a1qdbvrq1.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (45 pp, sha256
bf49559207ff65a8, retrieved 2026-11-05, tier: manufacturer) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# INA186A1QDBVRQ1
**Texas Instruments** · Current Sense Amplifiers · SOT-23-5
INA186A1QDBVRQ1 from Texas Instruments, in a SOT-23-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | GND | power_in | Analog ground and device reference; on the DBV package the REF node is connected internally to GND. |
| 2 | OUT | output | Analog output voltage equal to the gain times the differential input voltage from IN+ to IN-, offset by the voltage applied at REF; the specified swing is VS - 40 mV maximum to the positive rail and GND + 1 mV maximum to ground. |
| 3 | VS | power_in | Power supply, 1.7 V to 5.5 V. |
| 4 | IN- | input | Current-sense amplifier negative input; connect to the load side of the sense resistor for high-side sensing or to the ground side for low-side sensing. |
| 5 | IN+ | input | Current-sense amplifier positive input; connect to the bus-voltage side of the sense resistor for high-side sensing or to the load side for low-side sensing. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | SOT-23-5 |
| Category | Amplifiers/Comparators |
| Pins | 5 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Common-mode rejection ratio | CMRR | 120 | 150 | | dB | VSENSE = 0mV,VIN+ = -0.1V 至 40V,TA = -40°C 至 +125°C | 5 |
| Input offset voltage, RTI | VOS | -50 | -3 | 50 | µV | VS = 1.8V,VSENSE = 0mV | 5 |
| Offset drift, RTI | dVOS/dT | | 0.05 | 0.5 | µV/°C | VSENSE = 0V,TA = -40°C 至 +125°C | 5 |
| Power-supply rejection ratio, RTI | PSRR | -10 | -1 | 10 | µV/V | VSENSE = 0mV,VS = 1.7V 至 5.5V | 5 |
| Input bias current | IIB | | 0.5 | 3 | nA | VSENSE = 0mV | 5 |
| Gain error | EG | -1 | -0.04 | 1 | % | VOUT = 0.1 V 至 VS, 0.1 V | 5 |
| Gain error drift | | | 2 | 10 | ppm/°C | TA=-40°C 至 +125°C | 5 |
| Reference voltage rejection ratio, RTI | RVRR | -10 | 2 | 10 | µV/V | VREF = 100mV 至 VS, 100mV,TA = -40°C 至 +125°C | 5 |
| Swing to GND | VSN | | 0.05 | 1 | mV | VS = 1.8V,RL = 10kΩ 至 GND,TA = -40°C 至 +125°C,VSENSE = -10mV,VREF = 0V | 5 |
| Zero-current output voltage | VZL | | 2 | 10 | mV | VS = 1.8V,RL = 10kΩ 至 GND,TA = -40°C 至 +125°C,VSENSE = 0mV,VREF = 0V | 5 |
| Maximum capacitive load | | | | 1 | nF | 无持续振荡 | 5 |
| Quiescent current | IQ | | 48 | 65 | µA | VS = 1.8V,VSENSE = 0mV | 5 |
| Quiescent current over temperature | IQ | | | 90 | µA | VS = 1.8V,VSENSE = 0mV,TA = -40°C 至 +125°C | 5 |
| Supply voltage | VS | | | 6 | V | | 4 |
| Differential input voltage | VIN | -42 | | 42 | V | (VIN+), (VIN-) | 4 |
| Analog input voltage to GND | VIN+, VIN- | -0.3 | | 42 | V | VIN+、VIN-,相对于 GND;printed min GND, 0.3 | 4 |
| REF and OUT voltage to GND | REF, OUT | -0.3 | | | V | 相对于 GND;printed max (VS) + 0.3 V | 4 |
| Input current into any pin | | | | 5 | mA | 进入任一引脚的输入电流 | 4 |
| Operating temperature (absolute) | TA | -55 | | 150 | °C | 工作温度 | 4 |
| Junction temperature | TJ | | | 150 | °C | 结温 | 4 |
| Storage temperature | Tstg | -65 | | 150 | °C | 存储温度 | 4 |
| Common-mode input range | VCM | -0.2 | | 40 | V | 共模输入范围 | 4 |
| Input pin voltage range | VIN+, VIN- | -0.2 | | 40 | V | 输入引脚电压范围 | 4 |
| Operating supply voltage | VS | 1.7 | | 5.5 | V | 运行电源电压 | 4 |
| Operating ambient temperature | TA | -40 | | 125 | °C | 自然通风工作温度 | 4 |
| Junction-to-ambient thermal resistance | RqJA | | 176.3 | | °C/W | DBV (SOT23) 5 引脚 | 4 |
| Junction-to-case (top) thermal resistance | RqJC(top) | | 105.6 | | °C/W | DBV (SOT23) 5 引脚 | 4 |
| Junction-to-board thermal resistance | RqJB | | 66.4 | | °C/W | DBV (SOT23) 5 引脚 | 4 |
| Junction-to-top characterization parameter | YJT | | 43.9 | | °C/W | DBV (SOT23) 5 引脚 | 4 |
| Junction-to-board characterization parameter | YJB | | 66.1 | | °C/W | DBV (SOT23) 5 引脚 | 4 |
## CAD (KiCad official)
- Symbol: `INA186A1QDBVRQ1`
- Footprint: `Package_TO_SOT_SMD:SOT-23-5`
- 3D model: SOT-23-5 (KiCad packages3D, STEP)
- 3D model files: `ina186a1qdbvrq1-etched.step` / `ina186a1qdbvrq1-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `ina186a1qdbvrq1.step` / `ina186a1qdbvrq1.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/cn/lit/gpn/ina186-q1) (45 pp, sha256 `bf49559207ff65a8`, retrieved 2026-11-05, tier: manufacturer)
- **Datasheet language:** Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/ina186a1qdbvrq1-datasheet.pdf)