3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownINA185A2IDRLR
Texas Instruments · Current Sense Amplifiers · SOT-563
INA185A2IDRLR from Texas Instruments, in a SOT-563. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | OUT | output | Analog output voltage, with output swing limited to (VS - 0.026 V) maximum high and (GND + 0.0035 V) maximum low. |
| 2 | GND | power_in | Analog ground reference. |
| 3 | IN+ | input | Positive input of differential current-sense amplifier, common-mode voltage range -0.2 V to +26 V. |
| 4 | IN- | input | Negative input of differential current-sense amplifier, common-mode voltage range -0.2 V to +26 V. |
| 5 | REF | input | Reference voltage input setting the zero-input output level, operating range 0 V to VS (2.7 V to 5.5 V). |
| 6 | VS | power_in | Analog power supply, 2.7 V to 5.5 V operating range with 6 V absolute maximum and 260 µA maximum quiescent current. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | SOT-563 |
| Category | Amplifiers/Comparators |
| Pins | 6 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Common-mode rejection ratio, RTI | CMRR | 96 | 100 | dB | VIN+ = 0 V to 26 V, VSENSE = 0 mV, TA = –40°C to +125°C | 5 | |
| Offset voltage, RTI | VOS | -55 | 5 | 55 | μV | VSENSE = 0 mV, VIN+ = 0 V | 5 |
| Offset voltage, RTI | VOS | -130 | 25 | 130 | μV | VSENSE = 0 mV, VIN+ = 12 V | 5 |
| Offset drift, RTI | dVOS/dT | 0.2 | 0.5 | μV/°C | VSENSE = 0 mV, TA = –40°C to +125°C | 5 | |
| Power supply rejection ratio, RTI | PSRR | -30 | 8 | 30 | μV/V | VS = 2.7 V to 5.5 V, VIN+ = 12 V, VSENSE = 0 mV | 5 |
| Input offset current | IIO | -0.05 | 0.05 | μA | VSENSE = 0 mV | 5 | |
| Gain error (A2 device) | EG | -0.2 | 0.05 | 0.2 | % | VOUT = 0.5 V to VS – 0.5 V, TA = –40°C to +125°C | 5 |
| Gain error drift | 1.5 | 8 | ppm/°C | TA = –40°C to +125°C | 5 | ||
| Nonlinearity error | -0.01 | 0.01 | % | VOUT = 0.5 V to VS – 0.5 V | 5 | ||
| Maximum capacitive load | 1 | nF | No sustained oscillation | 5 | |||
| Quiescent current | IQ | 200 | 260 | μA | VSENSE = 0 mV | 5 | |
| Quiescent current | IQ | 300 | μA | VSENSE = 0 mV, TA = –40°C to +125°C | 5 | ||
| Common-mode input voltage | VCM | -0.2 | 12 | 26 | V | Over operating free-air temperature range | 4 |
| Operating supply voltage | VS | 2.7 | 5 | 5.5 | V | Over operating free-air temperature range | 4 |
| Operating free-air temperature | TA | -40 | 125 | °C | Over operating free-air temperature range | 4 | |
| Supply voltage | VS | 6 | V | 4 | |||
| Analog inputs differential voltage (VIN+) – (VIN–) | -26 | 26 | V | 4 | |||
| Analog inputs common-mode voltage (IN+, IN–) | 26 | V | 4 | ||||
| Operating temperature | TA | -55 | 150 | °C | 4 | ||
| Junction temperature | TJ | 150 | °C | 4 | |||
| Storage temperature | Tstg | -65 | 150 | °C | 4 | ||
| Electrostatic discharge, human-body model | V(ESD) | -3000 | 3000 | V | HBM, per ANSI/ESDA/JEDEC JS-001 | 4 | |
| Electrostatic discharge, charged-device model | V(ESD) | -1000 | 1000 | V | CDM, per JEDEC JESD22-C101 | 4 | |
| Junction-to-ambient thermal resistance | RθJA | 230.9 | °C/W | DRL (SOT-563), 6 pins | 4 | ||
| Junction-to-case (top) thermal resistance | RθJC(top) | 94.1 | °C/W | DRL (SOT-563), 6 pins | 4 | ||
| Junction-to-board thermal resistance | RθJB | 112.8 | °C/W | DRL (SOT-563), 6 pins | 4 | ||
| Junction-to-top characterization parameter | ψJT | 3.8 | °C/W | DRL (SOT-563), 6 pins | 4 | ||
| Junction-to-board characterization parameter | ψJB | 112.1 | °C/W | DRL (SOT-563), 6 pins | 4 |
CAD (KiCad official)
- Symbol:
INA185A2IDRLR - Footprint:
Package_TO_SOT_SMD:SOT-563 - 3D model: SOT-563 (KiCad packages3D, STEP)
- 3D model files:
ina185a2idrlr-etched.step/ina185a2idrlr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);ina185a2idrlr.step/ina185a2idrlr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (37 pp, sha256
0b28c48a0eafba7d, retrieved 2026-09-21, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.2, primaryclaude-haiku-4-5-20251001(text), consensusclaude-sonnet-4-6(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).