Generated by kicad-footprint-generator · KiCad file format 20260206
INA185A1IDRLT
Texas Instruments · Current Sense Amplifiers · SOT-563
INA185A1IDRLT from Texas Instruments, in a SOT-563. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | OUT | output | Analog output voltage from the current-sense amplifier. |
| 2 | GND | power_in | Analog ground reference. |
| 3 | IN+ | input | Current-sense amplifier positive input; for high-side topologies connect to the bus-voltage side of the sense resistor, for low-side topologies connect to the load side. |
| 4 | IN- | input | Current-sense amplifier negative input; for high-side topologies connect to the load side of the sense resistor, for low-side topologies connect to the ground side. |
| 5 | REF | input | Reference voltage input for output voltage offset adjustment. |
| 6 | VS | power_in | Power supply input, rated 2.7 V to 5.5 V. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | SOT-563 |
| Category | Amplifiers/Comparators |
| Pins | 6 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Differential input voltage (VIN+) – (VIN–) | -26 | 26 | V | 4 | |||
| Common-mode input voltage, IN+ and IN– | -0.3 | 26 | V | Relative to GND | 4 | ||
| Reference voltage | VREF | -0.3 | V | Relative to GND; printed upper limit is VS + 0.3 V | 4 | ||
| Output voltage | VOUT | -0.3 | V | Relative to GND; printed upper limit is VS + 0.3 V | 4 | ||
| Supply voltage | VS | 6 | V | 4 | |||
| Operating temperature | TA | -55 | 150 | °C | 4 | ||
| Junction temperature | TJ | 150 | °C | 4 | |||
| Storage temperature | Tstg | -65 | 150 | °C | 4 | ||
| Common-mode input voltage | VCM | -0.2 | 12 | 26 | V | 4 | |
| Operating supply voltage | VS | 2.7 | 5 | 5.5 | V | 4 | |
| Operating free-air temperature | TA | -40 | 125 | °C | 4 | ||
| Junction-to-ambient thermal resistance (DRL, SOT-563) | RθJA | 230.9 | °C/W | DRL (SOT-563) package | 4 | ||
| Junction-to-case (top) thermal resistance (DRL, SOT-563) | RθJC(top) | 94.1 | °C/W | DRL (SOT-563) package | 4 | ||
| Junction-to-board thermal resistance (DRL, SOT-563) | RθJB | 112.8 | °C/W | DRL (SOT-563) package | 4 | ||
| Junction-to-top characterization parameter (DRL, SOT-563) | ψJT | 3.8 | °C/W | DRL (SOT-563) package | 4 | ||
| Junction-to-board characterization parameter (DRL, SOT-563) | ψJB | 112.1 | °C/W | DRL (SOT-563) package | 4 | ||
| Common-mode rejection ratio, RTI (A1) | CMRR | 86 | 100 | dB | VIN+ = 0 V to 26 V, VSENSE = 0 mV, TA = –40°C to +125°C | 5 | |
| Offset voltage, RTI (A1) | VOS | -135 | 25 | 135 | μV | VSENSE = 0 mV, VIN+ = 0 V; printed ± | 5 |
| Offset voltage, RTI (A1) | VOS | -450 | 100 | 450 | μV | VSENSE = 0 mV, VIN+ = 12 V; printed ± | 5 |
| Offset drift, RTI | dVOS/dT | 0.2 | 0.5 | μV/°C | VSENSE = 0 mV, TA = –40°C to +125°C | 5 | |
| Power supply rejection ratio, RTI | PSRR | -30 | 8 | 30 | μV/V | VS = 2.7 V to 5.5 V, VIN+ = 12 V, VSENSE = 0 mV; printed ± | 5 |
| Input offset current | IIO | -0.05 | 0.05 | μA | VSENSE = 0 mV; printed ± | 5 | |
| Gain (A1) | G | 20 | V/V | 5 | |||
| Gain error (A1) | EG | -0.2 | 0.05 | 0.2 | % | VOUT = 0.5 V to VS – 0.5 V, TA = –40°C to +125°C; printed ± | 5 |
| Gain error drift | 1.5 | 8 | ppm/°C | TA = –40°C to +125°C | 5 | ||
| Nonlinearity error | -0.01 | 0.01 | % | VOUT = 0.5 V to VS – 0.5 V; printed ± | 5 | ||
| Maximum capacitive load | 1 | nF | No sustained oscillation | 5 | |||
| Swing to VS (A1) | VSP | -0.026 | -0.02 | V | RL = 10 kΩ to GND, TA = –40°C to +125°C; printed as (V+) – value | 5 | |
| Swing to GND | VSN | 0.0005 | 0.0035 | V | RL = 10 kΩ to GND, VIN+ – VIN– = –10 mV, TA = –40°C to +125°C | 5 | |
| Zero current swing to GND (A1) | VSG | 0.0005 | 0.006 | V | RL = Open, VIN+ – VIN– = 0 mV, VREF = 0 V, TA = –40°C to +125°C | 5 | |
| Bandwidth (A1) | BW | 350 | kHz | CLOAD = 10 pF | 5 | ||
| Slew rate | SR | 2 | V/μs | 5 | |||
| Voltage noise density, RTI | 40 | nV/√Hz | 5 | ||||
| Quiescent current | IQ | 200 | 260 | μA | VSENSE = 0 mV | 5 | |
| Quiescent current | IQ | 300 | μA | VSENSE = 0 mV, TA = –40°C to +125°C | 5 |
CAD (KiCad official)
- Symbol:
INA185A1IDRLT - Footprint:
Package_TO_SOT_SMD:SOT-563 - 3D model: SOT-563 (KiCad packages3D, STEP)
- 3D model files:
ina185a1idrlt-etched.step/ina185a1idrlt-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);ina185a1idrlt.step/ina185a1idrlt.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (37 pp, sha256
0b28c48a0eafba7d, retrieved 2026-10-03, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-4-5-20251001(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).