3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownINA183A1IDBVR
Texas Instruments · Current Sense Amplifiers · SOT-23-5
INA183A1IDBVR from Texas Instruments, in a SOT-23-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | GND | power_in | Analog device ground; both pins must be connected to ground. |
| 2 | GND | power_in | Analog device ground; both pins must be connected to ground. |
| 3 | OUT | output | Analog output voltage. |
| 4 | IN- | input | Analog input connected to load side of shunt resistor. |
| 5 | IN+ | power_in | Supply input (2.7V to 26V) and high-side sense input connected to supply side of shunt resistor; maximum quiescent current 130µA. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | SOT-23-5 |
| Category | Amplifiers/Comparators |
| Pins | 5 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Common-mode input range | VCM | 2.7 | 26 | V | TA = –40 °C to +125 °C | 5 | |
| Common-mode rejection ratio | CMRR | 100 | 120 | dB | VIN+ = 2.7 V to 26 V, VSENSE = 10 mV, TA = –40 °C to +125 °C | 5 | |
| Offset voltage, RTI | VOS | -170 | 25 | 170 | μV | VCM = 12 V; printed typ ±25 μV, max ±170 μV | 5 |
| RTI vs temperature | dVOS/dT | 0.1 | 0.5 | μV/°C | TA = –40 °C to +125 °C | 5 | |
| Input bias current (IB-) | IIB | 30 | 40 | μA | VSENSE = 0 mV | 5 | |
| Gain error | EG | -0.4 | 0.1 | 0.4 | % | VOUT = 0.5 V to VIN+ – 0.5 V, TA = –40 °C to +125 °C; printed typ ±0.1%, max ±0.4% | 5 |
| Gain error vs temperature | 3 | 10 | ppm/°C | TA = –40 °C to +125 °C | 5 | ||
| Nonlinearity error | -0.01 | 0.01 | % | VOUT = 0.5 V to VIN+ – 0.5 V; printed ±0.01% | 5 | ||
| Maximum capacitive load | 1 | nF | No sustained oscillation | 5 | |||
| Voltage swing to IN+ | VSP | -0.2 | -0.05 | V | Referenced to VIN+ (printed (VIN+) – 0.05 V typ, (VIN+) – 0.2 V); RL = 10 kΩ to GND, TA = –40 °C to +125 °C | 5 | |
| Voltage swing to GND | VSN | 0.005 | 0.05 | V | Referenced to GND (printed (VGND) + 0.005 V typ, + 0.05 V max); RL = 10 kΩ to GND, VIN+ - VIN- = -10 mV, TA = –40 °C to +125 °C | 5 | |
| Quiescent current, (IN+) | IQ | 83 | 130 | μA | VSENSE = 0 mV | 5 | |
| Quiescent current over temperature | IQ | 140 | μA | TA = –40 °C to +125 °C | 5 | ||
| Analog inputs, differential (VIN+) – (VIN–) | -0.3 | 26 | V | Printed lower limit GND – 0.3 V (referenced to GND); over operating free-air temperature range | 4 | ||
| Analog inputs, common-mode | -0.3 | 26 | V | Printed lower limit GND – 0.3 V, upper 26 V (referenced to GND); over operating free-air temperature range; see footnote 2 (current limited to 5 mA) | 4 | ||
| Output | -0.3 | 0.3 | V | Printed lower limit GND – 0.3 V, upper (IN+) + 0.3 V (max value referenced to IN+); over operating free-air temperature range | 4 | ||
| Operating temperature | -55 | 150 | °C | Printed as –55 to 150 °C | 4 | ||
| Junction temperature | 150 | °C | 4 | ||||
| Storage temperature | Tstg | -65 | 150 | °C | 4 | ||
| Electrostatic discharge, human-body model | V(ESD) | -3500 | 3500 | V | HBM per ANSI/ESDA/JEDEC JS-001; printed ±3500 V | 4 | |
| Electrostatic discharge, charged-device model | V(ESD) | -1000 | 1000 | V | CDM per JEDEC JESD22-C101; printed ±1000 V | 4 | |
| Supply voltage range, voltage at IN+ pin | VS | 2.7 | 12 | 26 | V | 4 | |
| Operating free-air temperature | TA | -40 | 125 | °C | 4 | ||
| Gain, A1 devices | G | 50 | V/V | A1 devices (INA183A1) | 5 | ||
| Slew rate | SR | 0.4 | V/μs | 5 | |||
| Bandwidth, A1 devices | BW | 80 | kHz | A1 devices, CLOAD = 10 pF | 5 | ||
| Voltage noise density | 25 | nV/√Hz | RTI | 5 | |||
| Junction-to-ambient thermal resistance | RθJA | 164.2 | °C/W | DBV (SOT-23) 5-pin | 4 | ||
| Junction-to-case (top) thermal resistance | RθJC(top) | 60.1 | °C/W | DBV (SOT-23) 5-pin | 4 | ||
| Junction-to-board thermal resistance | RθJB | 36.6 | °C/W | DBV (SOT-23) 5-pin | 4 | ||
| Junction-to-top characterization parameter | ψJT | 10.3 | °C/W | DBV (SOT-23) 5-pin | 4 | ||
| Junction-to-board characterization parameter | ψJB | 36.3 | °C/W | DBV (SOT-23) 5-pin | 4 |
CAD (KiCad official)
- Symbol:
INA183A1IDBVR - Footprint:
Package_TO_SOT_SMD:SOT-23-5 - 3D model: SOT-23-5 (KiCad packages3D, STEP)
- 3D model files:
ina183a1idbvr-etched.step/ina183a1idbvr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);ina183a1idbvr.step/ina183a1idbvr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (24 pp, sha256
2fa84e39fc819039, retrieved 2026-09-27, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.2, primaryclaude-haiku-4-5-20251001(text), consensusclaude-sonnet-4-6(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).