Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

INA181A2IDBVT

Texas Instruments · Current Sense Amplifiers · SOT-23-6

INA181A2IDBVT from Texas Instruments, in a SOT-23-6. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 OUT output Analog output voltage of the current sense amplifier, limited to the range GND - 0.3 V to VS + 0.3 V with a maximum output current of 8 mA.
2 GND power_in Ground.
3 IN+ input Positive input of the current sense amplifier; connect to the bus-voltage side of the sense resistor for high-side sensing or to the load side for low-side sensing, with common-mode range -0.2 V to +26 V.
4 IN- input Negative input of the current sense amplifier; connect to the load side of the sense resistor for high-side sensing or to the ground side for low-side sensing, with common-mode range -0.2 V to +26 V.
5 REF input Reference voltage input that sets the output level at zero differential input, settable from 0 V to VS.
6 VS power_in Power supply, 2.7 V to 5.5 V.

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package SOT-23-6
Category Amplifiers/Comparators
Pins 6

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Common-mode rejection ratio, RTI CMRR 84 100 dB VIN+ = 0V 至 26V,VSENSE = 0mV,TA = –40°C 至 +125°C 8
Input offset voltage, RTI VOS -150 25 150 μV VSENSE = 0mV,VIN+ = 0V 8
Input offset voltage, RTI VOS -500 100 500 μV VSENSE = 0mV 8
Input offset voltage drift, RTI dVOS/dT 0.2 1 μV/°C VSENSE = 0mV,TA = –40°C 至 +125°C 8
PSRR, RTI to supply PSRR -40 8 40 μV/V VS = 2.7V 至 5.5V,VIN+ = 12V,VSENSE = 0mV 8
Gain error EG -1 0.1 1 % VOUT = 0.5V 至 VS – 0.5V,TA =–40°C 至 +125°C 8
Gain error vs temperature 1.5 20 ppm/°C TA = -40°C 至 +125°C 8
Maximum capacitive load 1 nF 无持续振荡 8
Output swing to GND (VGND + value) VSN 0.0005 0.005 V RL = 10kΩ 至 GND,TA= –40°C 至 +125°C 8
Quiescent current, INA181 (single channel) IQ 195 260 μA VSENSE = 0mV 8
Quiescent current, INA181 (single channel) IQ 300 μA VSENSE = 0mV,TA = –40°C 至 +125°C 8
Supply voltage VS (absolute max) VS 6 V 7
Differential input voltage (VIN+) - (VIN-) VIN+ - VIN- -26 26 V 7
Common-mode input voltage (relative to GND) VCM -0.3 26 V GND – 0.3 to 26 V as printed 7
Input voltage at REF pin (min relative to GND, max VS + 0.3) -0.3 V max printed as VS + 0.3 V 7
Output voltage (min relative to GND, max VS + 0.3) VOUT -0.3 V max printed as VS + 0.3 V 7
Maximum output current IOUT 8 mA 7
Operating ambient temperature range (absolute max, natural convection) TA -55 150 °C 自然通风 7
Junction temperature TJ 150 °C 7
Storage temperature Tstg -65 150 °C 7
Common-mode input voltage VCM (IN+ and IN–) VCM -0.2 12 26 V 7
Operating supply voltage VS 2.7 5 5.5 V 7
Operating ambient temperature range TA -40 125 °C 自然通风条件 7
Junction-to-ambient thermal resistance (DBV) RθJA 198.7 °C/W DBV (SOT-23, 6) 7
Junction-to-case (top) thermal resistance (DBV) RθJC(top) 120.9 °C/W DBV (SOT-23, 6) 7
Junction-to-board thermal resistance (DBV) RθJB 52.3 °C/W DBV (SOT-23, 6) 7
Junction-to-top characterization parameter (DBV) ψJT 30.3 °C/W DBV (SOT-23, 6) 7
Junction-to-board characterization parameter (DBV) ψJB 52 °C/W DBV (SOT-23, 6) 7

CAD (KiCad official)

  • Symbol: INA181A2IDBVT
  • Footprint: Package_TO_SOT_SMD:SOT-23-6
  • 3D model: SOT-23-6 (KiCad packages3D, STEP)
  • 3D model files: ina181a2idbvt-etched.step / ina181a2idbvt-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); ina181a2idbvt.step / ina181a2idbvt.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (62 pp, sha256 16077f586e92eff4, retrieved 2026-10-03, tier: lcsc)
  • Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-4-5-20251001 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF