main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs ina180b1qdbvrq1: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
viewers ina180b1qdbvrq1: viewers · Ray
ina180b1qdbvrq1-etched.fit.json ina180b1qdbvrq1: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
ina180b1qdbvrq1-etched.glb ina180b1qdbvrq1: white body in tscircuit (pre-1.8 etch structure under an assembly instance); Ray 2026-10-19: black IC… · Ray
ina180b1qdbvrq1-etched.step ina180b1qdbvrq1: white body in tscircuit (pre-1.8 etch structure under an assembly instance); Ray 2026-10-19: black IC… · Ray
ina180b1qdbvrq1.glb Publish 0.1.0 · Ray
ina180b1qdbvrq1.kicad_mod Publish 0.1.0 · Ray
ina180b1qdbvrq1.kicad_sym Publish 0.1.0 · Ray
ina180b1qdbvrq1.lbr Publish 0.1.0 · Ray
ina180b1qdbvrq1.step Publish 0.1.0 · Ray
package.json Publish 0.1.0 · Ray
page.json ina180b1qdbvrq1: white body in tscircuit (pre-1.8 etch structure under an assembly instance); Ray 2026-10-19: black IC… · Ray
README.md ina180b1qdbvrq1: specified limits as data (metadata.characteristics, 25 rows from the datasheet) · Ray

INA180B1QDBVRQ1

Texas Instruments · Current-Sensing Amplifiers · SOT-23-5

INA180B1QDBVRQ1 from Texas Instruments, in a SOT-23-5. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 IN+ input Current-sense amplifier non-inverting analog input. In high-side applications, connect to the bus-voltage side of the sense resistor; in low-side applications, connect to the ground side of the sense resistor. Common-mode range -0.2 V to +26 V.
2 GND power_in Device ground reference. Tie to the system analog ground.
3 IN- input Current-sense amplifier inverting analog input. In high-side applications, connect to the load side of the sense resistor; in low-side applications, connect to the ground side of the sense resistor. Common-mode range -0.2 V to +26 V.
4 OUT output Buffered analog output voltage = Gain x (V(IN+) - V(IN-)); gain is fixed at 20 V/V for the B1 option. Rail-to-rail output typically within (VS - 0.03) V of VS and (GND + 0.005) V of GND with 10 kOhm load; 2 V/us slew rate; drives up to 1 nF capacitive load.
5 VS power_in Positive analog supply, 2.7 V to 5.5 V (absolute maximum 6 V). Bypass with a 0.1 uF ceramic capacitor to GND close to the pin. Typical quiescent current 260 uA (max 300 uA over -40 degC to +125 degC).

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package SOT-23-5
Category Op-amp/Cmp
Pins 5

Ordering variants

Same part, different packaging or reel option.

  • INA180B1QDBVRQ1
  • INA180B1QDBVRQ1DBVT
  • INA180B1QDBVRQ1DGKR
  • INA180B1QDBVRQ1DGKT
  • INA180B1QDBVRQ1PWR
  • INA180B1QDBVRQ1PWT

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
共模抑制比,RTI CMRR 84 100 dB VIN+ = 0V 至 26V,VSENSE = 10mV,TA = –40°C 至 +125°C 7
失调电压,RTI VOS -500 100 500 μV 7
失调电压,RTI (VIN+ = 0V) VOS -150 25 150 μV VIN+ = 0V 7
温漂,RTI dVOS/dT 0.2 1 μV/°C TA = -40°C 至 +125°C 7
电源抑制比,RTI PSRR -40 8 40 μV/V VS=2.7 V 至 5.5 V,VSENSE=10 mV 7
输入失调电流 IIO -0.05 0.05 µA VSENSE = 0mV 7
增益误差 EG -1 0.1 1 % VOUT = 0.5V 至 VS –0.5V,TA = –40°C 至 +125°C 7
增益误差与温度之间的关系 1.5 20 ppm/°C TA = -40°C 至 +125°C 7
非线性误差 -0.01 0.01 % VOUT = 0.5V 至 VS – 0.5V 7
最大容性负载 1 nF 无持续振荡 7
相对于 VS 电源轨的摆幅 VSP 0.02 0.03 V RL = 10kΩ 至 GND,TA= –40°C 至 +125°C 7
相对于 GND 的摆幅 VSN 0.0005 0.005 V RL = 10kΩ 至 GND,TA= –40°C 至 +125°C 7
静态电流 (INA180-Q1) IQ 197 260 µA VSENSE = 10 mV 7
静态电流 (INA180-Q1, 全温度范围) IQ 300 µA VSENSE = 10mV,TA = –40°C 至 +125°C 7
输入偏置电流 IIB 0.1 µA VSENSE = 0mV,VIN+ = 0V 7
输入偏置电流 IIB 80 µA VSENSE = 0mV 7
增益 (A1 器件) G 20 V/V A1 器件 7
带宽 (A1 器件) BW 350 kHz A1 器件,CLOAD = 10pF 7
压摆率 SR 2 V/µs 7
电压噪声密度 40 nV/√Hz 7
结至环境热阻 (DBV) RθJA 197.1 °C/W DBV (SOT-23) 6
结至外壳(顶部)热阻 (DBV) RθJC(top) 95.8 °C/W DBV (SOT-23) 6
结至电路板热阻 (DBV) RθJB 53.1 °C/W DBV (SOT-23) 6
结至顶部特征参数 (DBV) ψJT 23.4 °C/W DBV (SOT-23) 6
结至电路板特征参数 (DBV) ψJB 52.7 °C/W DBV (SOT-23) 6

CAD (KiCad official)

  • Symbol: INA180B1QDBVRQ1
  • Footprint: Package_TO_SOT_SMD:SOT-23-5
  • 3D model: SOT-23-5 (KiCad packages3D, STEP)
  • 3D model files: ina180b1qdbvrq1-etched.step / ina180b1qdbvrq1-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); ina180b1qdbvrq1.step / ina180b1qdbvrq1.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (42 pp, sha256 f2637d50a3661802, retrieved 2026-08-17, tier: lcsc)
  • Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
  • Extractor: ds2sf (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF