main
Ray
ina180a4qdbvrq1: specified limits as data (metadata.characteristics, 22 rows from the datasheet)
bf5b531
INA180A4QDBVRQ1
Texas Instruments · Current Sense Amplifiers · SOT-23-5
INA180A4QDBVRQ1 from Texas Instruments, in a SOT-23-5. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | OUT | output | Analog output voltage from the current sensing amplifier. |
| 2 | GND | power_in | Analog ground. |
| 3 | IN+ | input | Current sensing amplifier positive input; for high-side applications connect to sensing resistor bus voltage side, for low-side applications connect to sensing resistor load side. |
| 4 | IN- | input | Current sensing amplifier negative input; for high-side applications connect to sensing resistor load side, for low-side applications connect to sensing resistor ground side. |
| 5 | VS | power_in | Power supply, 2.7V to 5.5V. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | SOT-23-5 |
| Category | Amplifiers/Comparators |
| Pins | 5 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Common-mode rejection ratio, RTI | CMRR | 84 | 100 | dB | VIN+ = 0V 至 26V,VSENSE = 10mV,TA = –40°C 至 +125°C | 7 | |
| Input offset voltage, RTI | VOS | -500 | 100 | 500 | μV | 7 | |
| Input offset voltage, RTI (VIN+ = 0V) | VOS | -150 | 25 | 150 | μV | VIN+ = 0V | 7 |
| Gain error | EG | -1 | 0.1 | 1 | % | VOUT = 0.5V 至 VS –0.5V,TA = –40°C 至 +125°C | 7 |
| Gain error vs temperature | 1.5 | 20 | ppm/°C | TA = -40°C 至 +125°C | 7 | ||
| Nonlinearity error | -0.01 | 0.01 | % | VOUT = 0.5V 至 VS – 0.5V | 7 | ||
| Input offset voltage drift, RTI | dVOS/dT | 0.2 | 1 | μV/°C | TA = -40°C 至 +125°C | 7 | |
| Power-supply rejection ratio, RTI | PSRR | -40 | 8 | 40 | μV/V | VS=2.7 V 至 5.5 V,VSENSE=10 mV | 7 |
| Input offset current | IIO | -0.05 | 0.05 | µA | VSENSE = 0mV | 7 | |
| Maximum capacitive load | 1 | nF | 无持续振荡 | 7 | |||
| Output voltage swing to GND (RL = 10kΩ to GND) | VSN | 0.0005 | 0.005 | V | RL = 10kΩ 至 GND,TA= –40°C 至 +125°C;相对于 GND | 7 | |
| Quiescent current (INA180, VSENSE = 10 mV) | IQ | 197 | 260 | µA | VSENSE = 10 mV | 7 | |
| Quiescent current (INA180, over temperature) | IQ | 300 | µA | VSENSE = 10mV,TA = –40°C 至 +125°C | 7 | ||
| Gain (A4 device) | G | 200 | V/V | A4 器件 | 7 | ||
| Bandwidth (A4 device) | BW | 105 | kHz | A4 器件,CLOAD = 10pF | 7 | ||
| Slew rate | SR | 2 | V/µs | 7 | |||
| Voltage noise density, RTI | 40 | nV/√Hz | 7 | ||||
| Input bias current (VIN+ = 0V) | IIB | 0.1 | µA | VSENSE = 0mV,VIN+ = 0V | 7 | ||
| Input bias current | IIB | 80 | µA | VSENSE = 0mV | 7 | ||
| Junction-to-ambient thermal resistance | RθJA | 197.1 | °C/W | DBV (SOT-23) | 6 | ||
| Junction-to-case (top) thermal resistance | RθJC(top) | 95.8 | °C/W | DBV (SOT-23) | 6 | ||
| Junction-to-board thermal resistance | RθJB | 53.1 | °C/W | DBV (SOT-23) | 6 |
CAD (KiCad official)
- Symbol:
INA180A4QDBVRQ1 - Footprint:
Package_TO_SOT_SMD:SOT-23-5 - 3D model: SOT-23-5 (KiCad packages3D, STEP)
- 3D model files:
ina180a4qdbvrq1-etched.step/ina180a4qdbvrq1-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);ina180a4qdbvrq1.step/ina180a4qdbvrq1.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (47 pp, sha256
431fca93635b3bc9, retrieved 2026-09-23, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.2, primaryclaude-haiku-4-5-20251001(text), consensusclaude-sonnet-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# INA180A4QDBVRQ1
**Texas Instruments** · Current Sense Amplifiers · SOT-23-5
INA180A4QDBVRQ1 from Texas Instruments, in a SOT-23-5. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | OUT | output | Analog output voltage from the current sensing amplifier. |
| 2 | GND | power_in | Analog ground. |
| 3 | IN+ | input | Current sensing amplifier positive input; for high-side applications connect to sensing resistor bus voltage side, for low-side applications connect to sensing resistor load side. |
| 4 | IN- | input | Current sensing amplifier negative input; for high-side applications connect to sensing resistor load side, for low-side applications connect to sensing resistor ground side. |
| 5 | VS | power_in | Power supply, 2.7V to 5.5V. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | SOT-23-5 |
| Category | Amplifiers/Comparators |
| Pins | 5 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Common-mode rejection ratio, RTI | CMRR | 84 | 100 | | dB | VIN+ = 0V 至 26V,VSENSE = 10mV,TA = –40°C 至 +125°C | 7 |
| Input offset voltage, RTI | VOS | -500 | 100 | 500 | μV | | 7 |
| Input offset voltage, RTI (VIN+ = 0V) | VOS | -150 | 25 | 150 | μV | VIN+ = 0V | 7 |
| Gain error | EG | -1 | 0.1 | 1 | % | VOUT = 0.5V 至 VS –0.5V,TA = –40°C 至 +125°C | 7 |
| Gain error vs temperature | | | 1.5 | 20 | ppm/°C | TA = -40°C 至 +125°C | 7 |
| Nonlinearity error | | -0.01 | | 0.01 | % | VOUT = 0.5V 至 VS – 0.5V | 7 |
| Input offset voltage drift, RTI | dVOS/dT | | 0.2 | 1 | μV/°C | TA = -40°C 至 +125°C | 7 |
| Power-supply rejection ratio, RTI | PSRR | -40 | 8 | 40 | μV/V | VS=2.7 V 至 5.5 V,VSENSE=10 mV | 7 |
| Input offset current | IIO | -0.05 | | 0.05 | µA | VSENSE = 0mV | 7 |
| Maximum capacitive load | | | | 1 | nF | 无持续振荡 | 7 |
| Output voltage swing to GND (RL = 10kΩ to GND) | VSN | | 0.0005 | 0.005 | V | RL = 10kΩ 至 GND,TA= –40°C 至 +125°C;相对于 GND | 7 |
| Quiescent current (INA180, VSENSE = 10 mV) | IQ | | 197 | 260 | µA | VSENSE = 10 mV | 7 |
| Quiescent current (INA180, over temperature) | IQ | | | 300 | µA | VSENSE = 10mV,TA = –40°C 至 +125°C | 7 |
| Gain (A4 device) | G | | 200 | | V/V | A4 器件 | 7 |
| Bandwidth (A4 device) | BW | | 105 | | kHz | A4 器件,CLOAD = 10pF | 7 |
| Slew rate | SR | | 2 | | V/µs | | 7 |
| Voltage noise density, RTI | | | 40 | | nV/√Hz | | 7 |
| Input bias current (VIN+ = 0V) | IIB | | 0.1 | | µA | VSENSE = 0mV,VIN+ = 0V | 7 |
| Input bias current | IIB | | 80 | | µA | VSENSE = 0mV | 7 |
| Junction-to-ambient thermal resistance | RθJA | | 197.1 | | °C/W | DBV (SOT-23) | 6 |
| Junction-to-case (top) thermal resistance | RθJC(top) | | 95.8 | | °C/W | DBV (SOT-23) | 6 |
| Junction-to-board thermal resistance | RθJB | | 53.1 | | °C/W | DBV (SOT-23) | 6 |
## CAD (KiCad official)
- Symbol: `INA180A4QDBVRQ1`
- Footprint: `Package_TO_SOT_SMD:SOT-23-5`
- 3D model: SOT-23-5 (KiCad packages3D, STEP)
- 3D model files: `ina180a4qdbvrq1-etched.step` / `ina180a4qdbvrq1-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `ina180a4qdbvrq1.step` / `ina180a4qdbvrq1.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/cn/lit/gpn/ina180-q1) (47 pp, sha256 `431fca93635b3bc9`, retrieved 2026-09-23, tier: lcsc)
- **Datasheet language:** Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.2`, primary `claude-haiku-4-5-20251001` (text), consensus `claude-sonnet-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/ina180a4qdbvrq1-datasheet.pdf)