INA180A4IDBVT

{
  "slug": "ina180a4idbvt",
  "version": "0.1.0",
  "type": "component",
  "description": "Texas Instruments Current Sense Amplifiers, SOT-23-5. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "tags": [
    "component",
    "amplifiers-comparators",
    "ina180a4idbvt",
    "factory-2.0.0",
    "extractor-text"
  ],
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "ina180a4idbvt.kicad_sym",
    "ina180a4idbvt.kicad_mod",
    "ina180a4idbvt.glb",
    "ina180a4idbvt.step",
    "ina180a4idbvt.lbr",
    "docs/hero.png",
    "docs/ina180a4idbvt-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "ina180a4idbvt-hero.glb",
    "ina180a4idbvt-hero.overlay.json"
  ],
  "component": {
    "mpn": "INA180A4IDBVT",
    "manufacturer": "Texas Instruments",
    "package": "SOT-23-5",
    "pin_count": 5,
    "category": "Amplifiers/Comparators",
    "subcategory": "Current Sense Amplifiers",
    "datasheet": "https://www.ti.com/cn/lit/gpn/ina180",
    "parts": {
      "symbol": "ina180a4idbvt.kicad_sym",
      "footprint": "ina180a4idbvt.kicad_mod",
      "model_3d": "ina180a4idbvt-hero.glb",
      "model_3d_plain": "ina180a4idbvt.glb",
      "model_3d_step": "ina180a4idbvt-etched.step",
      "model_3d_step_plain": "ina180a4idbvt.step",
      "lbr": "ina180a4idbvt.lbr"
    },
    "distributor_links": {
      "lcsc": "C133969",
      "digikey": "296-46630-2-ND",
      "mouser": "595-INA180A4IDBVT"
    },
    "distributor_check": {
      "checked_at": "2026-10-10T15:58:28Z",
      "source": "Component Ocean /api/assign-pns",
      "digikey": {
        "pn": "296-46630-2-ND",
        "status": "found"
      },
      "mouser": {
        "pn": "595-INA180A4IDBVT",
        "status": "found"
      }
    },
    "pins": [
      {
        "number": "1",
        "name": "OUT",
        "type": "output",
        "description": "Analog output voltage of the current-sense amplifier, rated GND − 0.3 V to VS + 0.3 V, with a maximum output current of 8 mA and a specified swing of 30 mV max to the positive rail and 5 mV max to GND."
      },
      {
        "number": "2",
        "name": "GND",
        "type": "power_in",
        "description": "Ground reference for the device; the common-mode input is rated GND − 0.3 V to 26 V."
      },
      {
        "number": "3",
        "name": "IN+",
        "type": "input",
        "description": "Positive current-sense amplifier input; connect to the bus-voltage side of the sense resistor for high-side sensing or to the load side for low-side sensing, with a common-mode range of −0.2 V to +26 V."
      },
      {
        "number": "4",
        "name": "IN–",
        "type": "input",
        "description": "Negative current-sense amplifier input; connect to the load side of the sense resistor for high-side sensing or to the ground side for low-side sensing, with a common-mode range of −0.2 V to +26 V."
      },
      {
        "number": "5",
        "name": "VS",
        "type": "power_in",
        "description": "Power supply input, 2.7 V to 5.5 V; a bypass capacitor of at least 0.1 µF should be placed close to the pin."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.3",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.3",
        "primary_model": "claude-haiku-5-5",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-5-5",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [
          "extractor flagged: The datasheet defines two 5-pin SOT-23 pinouts (Pinout A, Figure 6-1; Pinout B, Figure 6-2). The dev; The pin name is printed as IN– in the pin function table but as IN± in the block diagrams. Both deno"
        ],
        "pages_sent": 25,
        "cost_usd": 0.1167,
        "at": "2026-10-10T15:58:15"
      },
      "datasheet": {
        "url": "https://www.ti.com/cn/lit/gpn/ina180",
        "pages": 53,
        "sha256": "223bd9e32ebff41b",
        "source_tier": "lcsc"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 5,
        "described": 5,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "ina180a4idbvt.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          2.8,
          2.9,
          1.55
        ],
        "zmin_mm": 0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "720a6eab0024069bbee68e7cb4c3ff1149468a34611225cdc852662c5d0ec2b7",
        "checked": "2026-10-10",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "ina180a4idbvt-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          2.8,
          2.9,
          1.55
        ],
        "zmin_mm": 0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "f39a353ceba5a7311729bf56517d9a441f6dba365d98575765e5ba8607793c10",
        "checked": "2026-10-23",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  }
}